Audio / Video

Functions are created by selecting the relevant folder and page in each case and then adding a function. 2 Types can be chosen from when the Audio/Video func- tion is selected:

Simple remote control: This element is used for the

remote control of various Audio/Video basic functions. This is achieved by sending various values via the corre- sponding linked object or group address. Every basic function has its own object or its own group address. The DPT must be individually selected for each function. Values are preset in accordance with this link or can be set within the relevant value range.

Technical manual 983501, 273 Pages Siemens AG Building Technologies Division

Update: http://www.siemens.com/gamma ã Siemens AG 2015 Control Products & Systems

Subject to change without further notice P. O. Box 10 09 53, D-93009 Regensburg

3.10.1.6.2/112

Icon: An icon can be selected to match the function

type. The IP Control Center includes a wide selection of icons. Visible only in the layout setting: "aligned".

Label: An appropriate function designation can be en-

tered.

Order: This is the function's position within the operat-

ing page.

Function: Selection of the functional category, e.g. Au-

dio/Video

Type: Simple remote control

Power: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

Play: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

Stop: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

Volume up: Link to a communication object, virtual ob-

ject or group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set in- dividually.

Volume down: Link to a communication object, virtual

object or group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set in- dividually.

The images for displaying the simple audio/video func- tions can be changed. The IP Control Center includes a wide selection of icons.

Display of the Simple Remote Control visualization view:

Simple Remote Control submenu:

Advanced remote control: This element is used for the

remote control of various Audio/Video functions (basic functions + advanced functions). This is achieved by sending various values via the corresponding linked ob- ject or group address. Every function has its own object or its own group address. The DPT must be individually selected for each function. Values are preset in accord- ance with this link or can be set within the relevant val- ue range.

Icon: An icon can be selected to match the function

type. The IP Control Center includes a wide selection of icons. Visible only in the layout setting: "aligned".

Label: An appropriate function designation can be en-

tered.

Order: This is the function's position within the operat-

ing page.

Function: Selection of the functional category, e.g. Au-

dio/Video

Type: Advanced remote control

Power: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

Play: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

Stop: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

Pause: Link to a communication object, virtual object or

Volume up: Link to a communication object, virtual ob-

ject or group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set in- dividually.

Vlome down: Link to a communication object, virtual

object or group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set in- dividually.

CHUp: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

CHDown: Link to a communication object, virtual object

or group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individu- ally.

Back: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

Forward: Link to a communication object, virtual object

or group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individu- ally.

AV: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually.

Mute: Link to a communication object, virtual object or

group address. This can be assigned from the lower left area of the Smart Editor using Drag & Drop. All of the DPTs are supported. The values can be set individually. The images for displaying the audio/video functions can be changed. The IP Control Center includes a wide selec- tion of icons.

Display of the Advanced Remote Control visualiza- tion view:

Technical manual 983501, 273 Pages Siemens AG Building Technologies Division

Update: http://www.siemens.com/gamma ã Siemens AG 2015 Control Products & Systems

Subject to change without further notice P. O. Box 10 09 53, D-93009 Regensburg

3.10.1.6.2/114

Advanced Remote Control submenu: