User response
AVZ0518E TERMINATION WAITING ON DB2 STATUS TASK FOR %1
Explanation
None.
User response
Contact IBM Software Support.
AVZ0519E maximum number of server address spaces are already active.
max possible %1. currently active
%2.
Explanation
None.
User response
Contact IBM Software Support.
AVZ0520E Maximum number of DB2 systems are all ready active. max possible
%1. DB2 %3.
Explanation
The maximum number of subsystems allowed by the server are already active.
User response
Edit the server configuration file, and reduce the number of database definitions in the file.
AVZ0521S DB2 subsysid STATUS TASK
ABEND abcode AT modname+offset DURING desc.
Explanation
None.
User response
Contact IBM Software Support.
AVZ0522W Proprietary R&&D utilities are activated for this start-up
Explanation
This warning indicates that private R-and-D utility functions are activated within the system. Customer copies of the product should never produce this message during start-up processing.
User response
If this message appears during start-up, terminate the server and contact Software Support. The execution of internal developer utilities off-site may produce damaging side effects.
AVZ0523W E/SQA ROUTINE AT addr WILL BE REBUILT DUE TO INVALID PTR OR DATA
Explanation
This warning indicates that the special E/SQA-resident SRASTC routine will be rebuilt. The existing pointer to the routine, or the routine itself, appears to have been damaged.
User response
Start-up processing clears the existing pointer and builds a new copy of the needed routine into E/SQA storage. The storage, if any, previously anchored by the OPVN vendor CSR table control block is orphaned.
Contact Software Support.
AVZ0600S IMS/OTMA XCF reqtype FAILED, RC=rcode RS=rsncode IMS=imsID
Explanation
This is a generic error message used to describe a wide variety of IMS/OTMA initialization and termination errors. The message text provides the current operation and what the current operation was trying to do.
User response
Check the error messages and the return code associated with this problem. There may be one or more error messages referring to the current problem.
If possible, fix the problem identified by the error messages, and restart the product. If the problem cannot be resolved, contact Software Support.
AVZ0601S service OF desc FAILED, RC=rcode
Explanation
This is a generic error message used to describe a wide variety of IMS/OTMA initialization and
termination errors. The message text provides the current operation and what the current operation was trying to do.
User response
Check the error messages and the return code associated with this problem. There may be one or more error messages referring to the current problem.
If possible, fix the problem identified by the error messages, and restart the product. If the problem cannot be resolved, contact Software Support.
AVZ0602I IMS/OTMA server waiting OTMA INIT for IMS SSID=subsys
Explanation
This message indicates that the IMS/OTMA
Transaction Server is waiting for initialization of the selected IMS subsystem. This message is
informational and issued periodically when OTMA support is waiting for IMS subsystem startup to occur.
User response
Determine why the IMS subsystem is unavailable.
Start the IMS subsystem to allow OTMA support to be enabled. If this message is issued in error, contact Software Support.
AVZ0603I IMS/OTMA server INIT in progress for IMS SSID=subsysID
Explanation
This message indicates that the IMS/OTMA
Transaction Server initialization is in progress for the selected IMS subsystem.
User response
None. This message is for informational purposes only.
AVZ0604I IMS/OTMA server INIT complete for IMS SSID=imsID using XCF member xcfID
Explanation
This message indicates that the IMS/OTMA
Transaction Server initialization has been successfully completed for the selected IMS subsystem.
User response
None. This message is for informational purposes only.
AVZ0605I IMS/OTMA server has detected OTMA TERM for IMS
SSID=subsysID
Explanation
This message indicates that the IMS/OTMA Transaction Server has detected IMS terminating OTMA support. This message is issued when it has been determined that IMS is leaving the XCF OTMA group. This may be due to IMS termination, a /STOP OTMA command, or OTMA abnormal termination. The product IMS/OTMA server will wait for IMS to restart OTMA support and continue processing OTMA request activity.
User response
None. This message is for informational purposes only.
AVZ0606I IMS/OTMA server TERM in progress for IMS SSID=subsysID
Explanation
This message indicates that the IMS/OTMA
Transaction Server is terminating for the selected IMS subsystem. This message is issued during product termination.
User response
None. This message is for informational purposes only.
AVZ0607I IMS/OTMA server TERM complete for IMS SSID=subsysID
Explanation
This message indicates that the IMS/OTMA
Transaction Server has completed termination for the selected IMS subsystem. This message is issued during product termination.
User response
None. This message is for informational purposes only.
AVZ0608S IMS/OTMA TPIPE TASK task FOR CONNECTION conn ABENDED CODE abcode
Explanation
This message indicates that the IMS/OTMA Transaction Pipe has ABENDED.
User response
Examine the Trace Browse and JES joblog to determine why the ABEND occurred. If the problem cannot be resolved, contact Software Support.
AVZ0620S SIS/XCF XCF reqtype FAILED, RC=rcode RS=rsncode SIS=ID
Explanation
This is a generic error message used to describe a wide variety of SIS/XCF initialization and termination errors. The message text provides the current
operation and what the current operation was trying to do.
User response
Check the error messages and the return code associated with this problem. There may be one or more error messages referring to the current problem.
If possible, fix the problem identified by the error messages, and restart the product. If the problem cannot be resolved, contact Software Support.
AVZ0621S service OF desc FAILED, RC=rcode
Explanation
This is a generic error message used to describe a wide variety of SIS/XCF initialization and termination errors. The message text provides the current
operation (service) and what the current operation was trying to do.
User response
Check the error messages and the return code associated with this problem. There may be one or more error messages referring to the current problem.
If possible, fix the problem identified by the error messages, and restart the product. If the problem cannot be resolved, contact Software Support.
AVZ0622T SIS/XCF member waiting SIS/XCF
%1 INIT for mbr=%2
Explanation
This message indicates that the SIS/XCF Server is waiting for initialization of the selected SIS subsystem.
This message is informational and issued periodically when an SIS/XCF standard member is waiting for the SIS/XCF manager to initialize.
User response
Determine why the SIS/XCF manager is unavailable.
Start the SIS/XCF manager to allow SIS/XCF support to be enabled. If this message is issued in error, contact Software Support.
AVZ0623I SIS/XCF %1 INIT in progress for member=%2
Explanation
This message indicates that the SIS/XCF Server initialization is in progress for the selected SIS subsystem.
User response
None. This message is for informational purposes only.
AVZ0624I SIS/XCF server INIT complete for SIS SSID=sisID using XCF member xcfID
Explanation
This message indicates that the SIS/XCF Server initialization has been successfully completed for the selected SIS subsystem.
User response
None. This message is for informational purposes only.
AVZ0625I SIS/XCF %1 instance has detected termination of %2 instance
member %3
Explanation
This message indicates that the SIS/XCF Transaction Server has detected SIS terminating SIS/XCF support.
This message is issued when it has been determined that SIS is leaving the XCF OTMA group. This may be due to SIS termination, or OTMA abnormal
termination. The SIS/XCF server will wait for SIS to restart SIS/XCF support and continue processing SIS request activity.
User response
None. This message is for informational purposes only.
AVZ0626I SIS/XCF %1 TERM in progress for member=%2
Explanation
This message indicates that the SIS/XCF Server is terminating for the selected SIS subsystem. This message is issued during product termination.
User response
None. This message is for informational purposes only.
AVZ0627I SIS/XCF %1 TERM complete for member=%2
Explanation
This message indicates that the SIS/XCF Transaction Server has completed termination for the selected SIS subsystem. This message is issued during product termination.
User response
None. This message is for informational purposes only.
AVZ0701W ZIIPCLASS=class HAS TOO MANY PERIODS SPECIFIED
Explanation
This message indicates that WLM initialization found too many matching report classes. Only six periods are allowed, and more than that matched the naming convention.
User response
Delete the extra report classes.
AVZ0702W CLASS class1 SPECIFIES A ZIPCLASS NAME THAT DOES NOT EXIST, class2
Explanation
This message indicates that WLM initialization found a class that referenced a ZIIPCLASS that could not be found.
User response
Correct the indicated WLM Class to reference an existing WLM pseudo-class.
AVZ0703W ZIIPCLASS=class CONTAINS INVALID PARMS
Explanation
This message indicates that WLM initialization found a ZIIPCLASS report class definition with invalid parms.
The description must contain a Pnnn percent definition and all but the last one must contain a Dnnnnnnn duration.
User response
Correct the definition field of the ZIIPCLASS report class definition.
AVZ0704H WLM refresh command completed
Explanation
The WLM command has successfully completed, refreshing WLM data within the product.
User response
None.
AVZ0706I product subsys requires the following elements missing from WLM Service type name
Explanation
Product initialization detected that the current WLM service policy does not have the all of the required definitions for Version 7.1 of the product. Messages listing the required service definition elements will follow this message.
type may be "policy" or "definition"
Consequently, name will be either a policy name or a definition name
User response
Respond to the WTOR prompts that follow these messages.
AVZ0707I Type: PEtype, Server Parameter:
PEname, Value: parmname
Explanation
Generic message used by product WLM initialization to list elements missing from the WLM service definition.
The PE in this message's variables stands for Policy Element
parmname represents the IN00 parameter name
User response
Respond to the WTOR prompts that follow this message.
AVZ0708R Reply 'GO' to update the WLM Service Definition, or 'CANCEL' to terminate server initialization
Explanation
This message is issued when product WLM initialization is about to update the current WLM service definition with the policy elements required for product server execution.
User response
Reply GO to allow the server to update the WLM service definition. Reply CANCEL to terminate server initialization
AVZ0709I WLM Service Definition def has been updated with required product elements
Explanation
This message is issued when product WLM
initialization has updated the WLM service definition (def) with the required product elements.
User response
Respond to the WTOR prompts that follow this message.
AVZ0710E Invalid reply: reply. Reply 'GO' or 'CANCEL'
Explanation
An invalid reply was specified to the server WLM initialization console message.
User response
Reply GO to cause the message to be reissued. Reply CANCEL to terminate server initialization.
AVZ0711E REPLY WAIT EXCEEDED 2