• No results found

Baccalaureus Technologiae: Engineering: Civil

SECTION 4: RULES FOR FORMER TSA

2. National Instructional Programmes: Engineering

2.7 Baccalaureus Technologiae: Engineering: Civil

(Programme code: BTECV)

2.7.1

Admission requirements

One of the following:

i) National Diploma: Engineering: Civil (S4)

ii) National Higher Diploma in Civil Engineering (T4) or an equivalent Civil Engineering qualification.

Students with a National Diploma (T3) in Civil Engineering must do bridging study units as determined by the academic programme group.

 Documentation III

Choose three of the following four study units:

 Structural Analysis III

 Transportation Engineering III

 Water Engineering III

 Geotechnical Engineering III

2.7.2

Aim of qualification

To train civil engineering technologists for specialization in a particular field of civil engineering, e.g. transportation, water, geotechnical, construction management, urban engineering and environmental engineering.

2.7.3

Curriculum

CODE PREREQUISITE / NOTES

EGE401C Environmental Management Engineering: Civil IV (Theory) Environmental Management Engineering: Civil IV (Practical)

Compulsory for all the BTech: Civil Engineering options

Choose ONE of the following options: A. TRANSPORTATION

CODE PREREQUISITE / NOTES

1. APT401C APT4PJT Asphalt Technology IV (Theory) Asphalt Technology IV (Project) See Note 3 See Note 2

CODE PREREQUISITE / NOTES 2. CNT401C CNT4PRA CNT4PJT Concrete Technology IV (Theory) Concrete Technology IV (Practical) Concrete Technology IV (Project) See Note 3 See note 1 See Note 2 3. PVT401C PVT4PJT Pavement Technology IV (Theory) Pavement Technology IV

(Project) See Note 2

4. TRE401C TRE4PJT

Traffic Engineering IV (Theory)

Traffic Engineering IV

(Project) See Note 2

5. TRP401C TRP4PJT

Transportation Planning IV (Theory)

Transportation Planning

IV (Project) See Note 2

6. RLE401C Railway Engineering IV* 7. GDS401C

GDS4PJT

Geometric Design IV (Theory)

Geometric Design IV

(Project) See Note 2

8. TRT401C TRT4PJT

Transportation Technology IV* (Theory) Transportation

Technology IV* (Project) See Note 2

B. WATER See Programme Structure – All options

CODE PREREQUISITE / NOTES

1. IRR401C

IRR4PJT Irrigation IV (Theory)Irrigation IV (Project) See Note 2 2. HDL401C

HDL4PJT Hydraulics IV (Theory)Hydraulics IV (Project) See Note 2 3. HDG401C

HDG4PJT Hydrology IV (Theory)Hydrology IV (Project) See Note 2 4. RDM401C

RDM4PJT

Reticulation Design and Management IV (Theory) Reticulation Design and Management IV (Project) Hydraulics IV (Corequisite) See Note 2 5. PDE401C PDE4PJT Principles of Dam Engineering IV (Theory) Principles of Dam Engineering IV (Project) See Note 2 6. WWT401C WWT4PJT

Waste Water Treatment Technology IV (Theory) Waste Water Treatment Technology IV (Project) See Note 2 7. WTT401C WTT4PJT Water Treatment Technology IV (Theory) Water Treatment

Technology IV (Project)* See Note 2

C. STRUCTURAL See Programme Structure – All Options

CODE PREREQUISITE / NOTES

1. SAN401C Structural Analysis IV 2. SMD401C

SMD4PJT

Structural Masonry Design IV (Theory) Structural Masonry

Design IV (Project) See Note 2 3. SSD401C

SSD4PJT

Structural Steel Design IV (Theory)

Structural Steel Design

IV (Project) See Note 2

4. TST401C Theory of Structures IV

CODE PREREQUISITE / NOTES

5. STD401C STD4PJT

Structural Timber Design IV (Theory)

Structural Timber Design

IV (Project) See Note 2

6. FEN401C FEN4PJT

Foundation Engineering IV (Theory)

Foundation Engineering

IV (Project) See Note 2

7. PCD401C PCD4PJT Prestressed Concrete Design IV (Theory) Prestressed Concrete Design IV (Project) Concrete Technology IV (Theory & Project) – Co- requisite See Note 2 8. RCD401C

RCD4PJT

Reinforced Concrete Design IV* (Theory) Reinforced Concrete Design IV* (Project)

Concrete Technology IV (Theory & Project) – Co- requisite See Note 2

D. GEOTECHNICAL See Programme Structure – All options

CODE PREREQUISITE / NOTES

1. HGE301C HGE3PJT

Hydrogeology III (Theory) Hydrogeology III

(Project) See Note 2

2. CMT401C CMT4PJT Construction Materials Technology IV (Theory) Construction Materials Technology IV (Project) See Note 3 See Note 2 3. GCV401C GCV4PJT Geology: Civil IV (Theory) Geology: Civil IV

(Project) See Note 2

4. EDS401C EDS4PJT

Earthworks Design IV (Theory)

Earthworks Design IV

(Project) See Note 2

5. FDD401C FDD4PJT

Fill Dam Design IV* (Theory)

Fill Dam Design IV*

(Project) See Note 2

6. FEN401C FEN4PJT

Foundation Engineering IV (Theory)

Foundation Engineering

IV (Project) See Note 2

7. APG401C APG4PJT

Applied Geomechanics IV* (Theory)

Applied Geomechanics

IV* (Project) See Note 2

E. CONSTRUCTION MANAGEMENT – See Specific programme structure – Construction Management

CODE PREREQUISITE / NOTES

1. IRN201C Industrial Relations and Negotiation II

2. FNM301C Financial Management III 3. PME361V Principles of Management

Economics III

4. MPP401C Management Principles

and Practice IV Compulsory

5. CLC101C Commercial Law: Civil* 6. HRC401C Human Resources

Management: Civil IV Compulsory 7. CMC401C CMC4PJT Contract Management: Civil IV (Theory) Contract Management: Civil IV (Project) Compulsory See Note 2

CODE PREREQUISITE / NOTES 8. PJM401C Project Management:

Civil IV Compulsory

F. URBAN ENGINEERING See Programme Structure – All Options

CODE PREREQUISITE / NOTES

1. UPD401C UPD4PJT

Urban Planning and Design IV (Theory) Urban Planning and

Design IV (Project) See Note 2 2. CMT401C CMT4PJT Construction Materials Technology IV (Theory) Construction Materials Technology IV (Project) See Note 3 See Note 2 3. PVT401C PVT4PJT Pavement Technology IV (Theory) Pavement Technology IV

(Project) See Note 2

4. RDM401C RDM4PJT

Reticulation Design and Management IV (Theory) Reticulation Design and Management IV (Project) Hydraulics IV (co- requisite) See Note 2 5. SWM401C SWM4PJT

Solid Waste Management IV (Theory)

Solid Waste Management

IV (Project) See Note 2

6. GDS401C

GDS4PJT Geometric Design IVGeometric Design IV

(Project) See Note 2

G. ENVIRONMENTAL ENGINEERING – See specific programme structure – Environmental Engineering

CODE PREREQUISITE / NOTES

1. SWM401C SWM4PJT

Solid Waste Management IV (Theory)

Solid Waste Management

IV (Project) See Note 2

2. EEN4M1C EEN4PJA EEN4M2C EEN4PJB Environmental Engineering: Civil IV (EEN401C): TWO modules: Module A (Theory) Module A (Project) Module B* (Theory) Module B* (Project) Compulsory See Note 2

Module A: Theory & Project are co-requisites

3. SNS4M1C SNS4PJA SNS4M2C SNS4PJB Social Environmental Studies: Civil IV (SNS401C): TWO modules: Module A (Theory) Module A (Project) Module B (Theory) Module B (Project) Compulsory See Note 2

Module A: Theory & Project are co-requisites

4. EGE401C

EGE4PJT

Environmental Management for Engineers: Civil IV* (Theory)

Environmental Management for Engineers: Civil IV* (Project)

Compulsory

See Note 2

Offered by the College of Agriculture and Environmental Sciences 5. WRM401C

WRM4PJT

Water Resource Management: Civil IV* (Theory)

Water Resource Management: Civil IV* (Project)

See Note 2

CODE PREREQUISITE / NOTES

6. SWP401C

SWP4PJT

Soil and Groundwater Pollution: Civil IV* (Theory)

Soil and Groundwater Pollution: Civil IV* (Project) See Note 2 7. WTT401C WTT4PJT Water Treatment Technology IV (Theory) Water Treatment

Technology IV (Project) See Note 2 8. WWT401C

WWT4PJT

Waste Water Treatment Technology IV (Theory) Waste Water Treatment

Technology IV (Project) See Note 2

* Check the availability of these-study units before registration.

NOTES

1. PRACTICAL STUDY UNITS

The student must register for the practical and related theoretical study units simultaneously. Both the practical component and the theory component must be passed to obtain full credit for the subject. The student can do the practical work in either his/her working environment or a�end a practical workshop.

2. PROJECT STUDY UNITS

The student must register for the project and related theoretical subject simultaneously. Both the project component and the theory component must be passed to obtain full credit for the subject.

3. CONSTRUCTION MATERIALS TECHNOLOGY IV This subject may not be taken in combination with Concrete Technology IV and/or Asphalt Technology IV.

2.7.4

Programme structure

– all options

1. A total of eight (8) study units must be taken.

2. Environmental Management for Engineers: Civil IV is compulsory for all the options.

3. At least five (5) study units must be taken from (any) of the options and in any option at least four (4) level IV study units must be in a field of specialization.

2.7.5

Specific programme

structure – Construction

Management

1. Choose two (2) study units from the other BTech: Engineering:

Civil options.

2. An extended period of experience to enhance the applicant’s engineering competency is required for ECSA registration.

2.7.6

Specific programme

structure – Environmental Engineering

1. The following study units are compulsary for Environmental

Engineering:

 Environmental Engineering (Civil) IV Module A

 Social Environmental Studies (Civil) IV Module A

Module B

2. For Environmental Engineering all the study units must be selected from the Environmental Engineering specialisation field (select two (2) of the remaining study units).

2.8 National Diploma: Engineering: