1. The Installation Type window will be displayed.
Image 3: IDENTIKEY Server Installation - Installation Type Window 2. Click Perform a basic installation.
3. Click Next.
The End-User License Agreement screen will be displayed.
Install IDENTIKEY Server in Basic Mode – ODBC
Image 4: IDENTIKEY Server Installation -License Agreement Window 4. Read the agreement carefully.
5. To accept the License Agreement, check the box I accept the terms in the License Agreement and click Next.
If you do not accept the License Agreement, and click Cancel, the install will terminate.
The Select Installation Path window will be displayed.
Image 5: IDENTIKEY Server Installation - Select Installation Path Window
6. If you want to install the IDENTIKEY Server somewhere other than the default location, use the browse button to indicate where.
7. Click Next to continue.
The Installation Progress window will be displayed.
Install IDENTIKEY Server in Basic Mode – ODBC
Image 6: IDENTIKEY Server Installation - Installation Progress Window 8. Click on Install.
The IDENTIKEY Server installation will begin.
Image 7: IDENTIKEY Server Installation - Installation Progress Window
The Installer will install each component in turn, checking each one off on the Installation Progress window as it goes.
Install IDENTIKEY Server in Basic Mode – ODBC
Image 8: IDENTIKEY Server Installation - Installation Progress Window - PostgreSQL
When the Installer gets to the Run configuration Wizard step, the IDENTIKEY Server Configuration Wizard will be started automatically. The Installer runs a contracted version of the wizard, which uses default values for some settings.
Image 9: IDENTIKEY ServerConfiguration Wizard - Start Window 9. Click Next to continue.
The IP Address window will be displayed.
Install IDENTIKEY Server in Basic Mode – ODBC
Image 10: IDENTIKEY ServerConfiguration Wizard - IP Address Window 10. Enter the IP address for the IDENTIKEY Server.
11. Click Next.
The First Administrator window will be displayed.
Image 11: IDENTIKEY ServerConfiguration Wizard - First Administrator Window
12. Enter a User ID and Password. Confirm the password and click Next The Licence Key window will be displayed. Use this page to load the license for IDENTIKEY Server, or click Next to continue and apply the license at a later date.
Install IDENTIKEY Server in Basic Mode – ODBC
Image 12: IDENTIKEY ServerConfiguration Wizard - License Window
13. Navigate to a license file using the ... button, or click Request a license from 'vasco.com'. Click Next to continue.
Note
The 'Request a License from vasco.com' button will not be available for Windows 2008 Core, as there is no browser available to load the web site. To obtain a license from vasco.com for Windows 2008 Core you will have to download the license on another machine and copy it across to the Windows 2008 Core machine.
Image 13: IDENTIKEY ServerConfiguration Wizard - Server Functionality Window
The functionality that is permitted by the license loaded on the previous window is selected by default. If no license was loaded only restricted functionality will be available.
14. Click to de-select any functions not required.
15. Click Next to continue.
Install IDENTIKEY Server in Basic Mode – ODBC
Image 14: IDENTIKEY ServerConfiguration Wizard - Server Certificate Window 16. Enter a Password for the SSL Server Certificate and confirm it.
17. Click Next to continue. Use this window to deploy the Administration Web Interface.
Image 15: IDENTIKEY ServerConfiguration Wizard – Deploy Administration Web Interface Window
There are three choices:
Deploy Administration Web Interface and connect it to the local IDENTIKEY Server. Click this choice to automatically deploy the Administration Web Interface and associate it with the local IDENTIKEY Server without having to enter further details
Deploy Administration Web Interface and connect it to a remote IDENTIKEY Server. Click this choice to deploy the Administration Web Interface, and also supploy the SOAP URL of the remote server on which the required IDENTIKEY Server resides.
Do not deploy Administration Web Interface . Click this choice to enable you to deploy the Administration Web Interface later.
Click Next to continue to the RADIUS Topology page.
Image 16: IDENTIKEY ServerConfiguration Wizard - RADIUS Topology Window 18. Select the format of RADIUS topology required.
19. Click Next to continue.
If you selected IDENTIKEY Server as a standalone RADIUS server, fill in the details of the RADIUS Client and click Next to continue.
If you selected IDENTIKEY Server in front of RADIUS server, fill in the details of the RADIUS Client and RADIUS Backend and click Next to continue..
Install IDENTIKEY Server in Basic Mode – ODBC
Image 17: IDENTIKEY Server Configuration Wizard - RADIUS Client Window
Image 18: IDENTIKEY Server Configuration Wizard - RADIUS Backend Window The Summary window will be displayed.
Image 19: IDENTIKEY Server Configuration Wizard Summary Window
20. A summary of the settings will be displayed. Click Proceed to continue.
Image 20: IDENTIKEY Server Configuration Wizard - Completion Window
Install IDENTIKEY Server in Basic Mode – ODBC
During the deployment of the Administration Web Interface, the Installer will deploy the Administration Web Interface application to the Apache web server using the IDENTIKEY Server certificate. The IDENTIKEY Server Certificate file will be generated during installation and will be placed in the certificate store file with the default password "ikwebpassword". The location of the server certificate files is \<install
directory>\bin\ikeycerts.pem and \<install directory>\bin\ikeypvk.pem (Public and Private certificates respectively) The location of the certificate keystore is \<install directory>\webadmin\keystore.jks 21. Click Finish to complete the configuration.
The Import DPX files window will be displayed.
Image 21: Import DPX Files Window
22. The Import DPX Files step is optional. To bypass this step, click Next to continue.
To import a DPX file:
a. Enter the location of the DPX file, or click Browse to navigate to the file.
b. Enter the Transport Key, which will be supplied by VASCO to accompany the DPX file.
c. Enter the User ID, password and Server IP for the IDENTIKEY Server that is being installed.
d. Click Import to install the DPX file.
When installation is complete, the Installation Completed window will be displayed.
Image 22: IDENTIKEY Server Installation Complete Window 23. Click Finish when the installation is complete.
Install IDENTIKEY Server in Advanced mode - ODBC
6 Install IDENTIKEY Server in Advanced mode - ODBC
Advanced Installation allows you to customize your installation and configuration in detail. If you wish to use only default installation and configuration options, see 5 Install IDENTIKEY Server in Basic Mode – ODBC .