Bolt Type =1: 1 - Thread 2 - Nut 3 - Runout 4 - Shank 5 - Radius 6 - Head 7 - Thread Length 8 - Grip Length 9 - Nominal Length Bolt Type = 2: with bolt extension
1 - Nuts 2 - Thread 3 - Nominal Length
4 - Bolt Extension
Bolt Length Formula Bolt Type = 1:
BOLT LEN = Round ( X + Number Nut * Nut Thickness + Bolt extension) Bolt Type = 2:
BOLT LEN = Round ( X + Number Nut * Nut Thickness + 2*Bolt extension) Where X is:
The round function works with the BoltRoundControl setting. BoltRoundControl specifies the rounding of bolt length: 0 - No rounding is performed.
1 - Rounds the value up to the nearest multiple of the value specified in Tolerance. 2 - Rounds the value down to the nearest multiple of the value specified in Tolerance. 3 - Rounds the value up or down to the nearest multiple of the value specified in Tolerance.
92
CADWorx Spec Editor User's Guide
The bolt length is maximum of calculated length and bolt length in the data table.Bolt Flanges
Two flange components are required, with optional gaskets and components.
Components in the middle must have a wafer end type on both ends. Two components are allowed. 1 - Bleed ring 2 - Spectacle blind
Welds
Required
MAINSIZE - Main Size - Specifies the main sizes for the component. THK - Thickness - Specifies the thickness of a weld.
TYPE - Type - Specifies the type of weld.
WEIGHT - Weight - Specifies the weight for the component.
USER_PART_NUMBER - User Part Number - Specifies the unique part number of each individual component.
Upon import of the DAT file the user field USER_PART_NUMBER is created for each component data table. This is a unique custom data field which associates part numbers derived from the DAT file with each component in the new specification imported from the legacy specification. You can also specify this custom data field manually to assign component record-level part numbers (PTN)s by double clicking Custom Data in the Properties pane and creating the USER_PART_NUMBER field exactly as it is spelled. Custom Data - Enables you to input fields using the New Field Dialog Box (on page 43). Picture Description - Displays a 2D image of the component.
CADWorx Spec Editor User's Guide
93
Weld
1. Thickness
Laterals
Specifies the laterals properties. To view the properties:
1. Click the plus (+) sign next to Laterals to expand the category. 2. Click a plus (+) sign next to a lateral component.
3. Click the actual data table.
Some of the components do not have all properties. If a property is not listed for a component, then that component does not use the property.
Default EndType Data Table Setup
Apply same end type to all ends - Applies the same end type to all ends when this option is set to True. When set to False, the software uses more than one end type.
Start - Specifies the start end type associated with that component. This can be changed. End - Specifies the end end type associated with that component. This can be changed.
Branch1 - Specifies the branch end type associated with that component. This can be changed. This property sets the default endtype(s) when a new component referencing the
associated data table is added to a Project Specification in the New Component pane. For more information, see New and Edit Component Pane (on page 47).
Required
MAINSIZE - Main Size - Specifies the main sizes for the component.
REDSIZE - Reduction Size - Specifies the reduction sizes for the component. The reduction option is only available on reducing components.
CSEND - Center to Small End - Specifies the small center end. CLEND - Center to Large End - Specifies the large center end. CBRH - Center to Branch - Specifies the center branch. WEIGHT - Weight - Specifies the weight for the component.
ETS - Bitwise End Type Placement Control - Specifies the value for the placement control. Placement control is calculated by the end type number for each end port. For example, a Tee has three ends so the bit type placement control would be 7. Side 1 is 1 side 2 is two and side 3 is 4 equaling 7.
USER_PART_NUMBER - User Part Number - Specifies the unique part number of each individual component.
94
CADWorx Spec Editor User's Guide
Upon import of the DAT file the user field USER_PART_NUMBER is created for each component data table. This is a unique custom data field which associates part numbers derived from the DAT file with each component in the new specification imported from the legacyspecification. You can also specify this custom data field manually to assign component record-level part numbers (PTN)s by right clicking the data table and selecting Add User Part Number Column. You can also accomplish this by double clicking Custom Data in the Properties pane and creating the USER_PART_NUMBER field exactly as it is spelled. Custom Data - Enables you to input fields using the New Field Dialog Box (on page 43). Picture Description - Displays a 2D image of the component.
Lateral Lateral Reducing
1. CBRH 2. MAINSIZE 3. CSEND 4. CLEND 1. CBRH 2. REDSIZE 3. MAINSIZE 4. CLEND 5. CSEND
O-Lets
Specifies the o-lets properties. To view the properties:
1. Click the plus (+) sign next to O-Lets to expand the category. 2. Click a plus (+) sign next to an o-let component.
3. Click the actual data table.
Some of the components do not have all properties. If a property is not listed for a component, then that component does not use the property.
Default EndType Data Table Setup
Apply same end type to all ends - Applies the same end type to all ends when this option is set to True. When set to False, the software uses more than one end type.
End - Specifies the end end type associated with that component. This can be changed. This property sets the default endtype(s) when a new component referencing the associated data table is added to a Project Specification in the New Component pane. For more information, see New and Edit Component Pane (on page 47).
Required
MAINSIZE - Main Size - Specifies the main sizes for the component. PSA - Pipe Sizes Allowed - Specifies the pipe size allowed for the O-let. HUBOD - HUB Outside Diameter - Specifies the outside diameter of the O-let. PROJ - Outside Projection - Specifies the projection from the outer point. OLETANGLE - Olet Angle - Specifies the angle of the O-let.
PENG - Pipe Engagement - Specifies the pipe engagement of the O-let. PSB - Pipe Set Back - Specifies the set back of the pipe from the end point.