When a camera event occurs, the camera will start recording when the event begins and then save the still image log. Camera events can be set up through BioStar only. On the terminal, the events can only be checked.
1 Select [Menu] > [Mode] > [Camera Event].
2 You can check the settings through the BioStar software.
De
■ Fin
Select
1
evice S
ngerprint S
[Menu] > [Device]
Security Level level is determin stands for a rati lower the FAR is, Reject Rate) gets registered users g For the general T Normal. However, we recommend yo Secure or Most Se
Setup
Setting
] > [Fingerprint].
(Normal/Secure/M ned by False Acc o of accepting un
the higher the secu s higher so that t gets lower.
&A management pu , if you need high ou to raise the sec ecure.
p
ost Secure): The eptance Ratio (FA nregistered fingerpr
urity is, however, FR the recognition rat urposes, we recom access control and curity level from Mo
e security AR). FAR rints. The RR (False tio of the
mend the d security, oderate to
2 Fast Mode Mode is use the recogni reduce the recognition.
automatical number of to 3 View Imag
image on t registered f right fingerp 4 Sensitivity the high se the low sen be always h the value t sunlight, rel 5 Scan Time then press enter the fin 6 Fake Detec
detect the fa 7 Template T template typ
e (Normal/Fast/Fa ed while hundreds o ition time may be e recognition time
At this time, FRR ly determines the r otal fingerprint temp e: Check whether he screen. With th fingerprint image o print.
(0~7):Set the sens nsitivity, it is easier nsitivity, the quality high. For the gener to Max. If the ter ieve the effect by lo eout(sec) (1~20): S
[OK]. Authenticatio ngerprint within the s ct: Check whether ake fingerprint attac Type (Suprema/IS pe and then press [O
astest/Auto): If 1 of users are saved
too long. In this e by setting the may be higher tha recognition speed a plates registered to or not to display his function, users on the LCD screen
sitivity of the fingerp r to enter fingerprin of entered fingerpr ral use, we recomm rminal can be affe owering this value.
Set the fingerprint on fails when the specified time.
or not to run an ck.
SO 19794-2/ANSI OK].
:N Recognition in the terminal, case, you can speed of 1:N n before. [Auto]
according to the the terminal.
y the fingerprint can check the n and input the
print scanner. At nts. However, at rint images can mend you to set ected by direct
input time and user does not examination to
378): Set the
Note Generally, the default values are recommended.
■ Do
Select
1
2
oor
[Menu] > [Device]
Relay: Select a re Not Used/ Interna External Relay 1/
SIO1 Relay 1/ SIO Relay 1)
Driven by: Set th press [OK].
- All Events authenticati - Authenticat authenticati - T&A Event:
relay will be - Authenticat events whe
] > [Door].
elay to open the doo al Relay 0/ Internal
SIO0 Relay 0/ SI O2 Relay 0/ SIO2 R
he event that trigg s: The door is
ion event type.
tion: The door is ion events, not for t
The door is open f e used.
tion + T&A Event: T ere the relay will b
or on authentication Relay 1/ External O0 Relay 1/ SIO1 Relay 1/ SIO3 Rela
gers door opening open regardless open only for the he T&A events.
for the T&A events w The door is open fo
be used among th
n. (Values: door open a the time has 4 RTE(Exit SW
[OK]. (Value Input 1/ SIO SIO1 Input Input 2/ SIO SIO3 Input 3 5 RTE Type:
[OK]. (Value 6 Door Senso
and then pr SIO0 Input Input 0/ SIO SIO2 Input Input 1/ SIO 7 Door Senso
then press [O 8 Held Open
go off after t 9 Unlock Tim
During the u Always/ Aut the BioStar o 10 Lock Time:
press [OK].
sec): Sets up the t after an event. The r s elapsed.
W): Select the relay es: Input 0/ Input 1/ I O0 Input 2/ SIO0 In 2/ SIO1 Input 3/ S O2 Input 3/ SIO3 In
3)
Select the door sw s: N/O, N/C) or: Select the dete ress [OK]. (Values:
0/ SIO0 Input 1/ S O1 Input 1/ SIO1 In
1/ SIO2 Input 2/ S 3 Input 2/ SIO3 Inp or Type: Select th OK]. (Values: N/O, N
Period(sec): Set th he door opens and me: Set the time to unlock time, the doo o IN/ Auto Out). Th only.
Set the time to kee (Not Used/ Always/
ime for which the relay will close the
y for the door switch Input 2/ Input 3/ SIO
put 3/ SIO1 Input 0 SIO2 Input 0/ SIO2 put 0/ SIO3 Input 1
witch operation type
ction mechanism fo Input 0/ Input 1/ I SIO0 Input 2/ SIO0
put 2/ SIO1 Input 3 SIO2 Input 3/ SIO3
ut 3)
e door sensor ope N/C)
he duration of time then press [OK].
o keep the door fo or is not closed. (Va
he unlock time can ep the door forcibly Auto IN/ Auto Out)
relay keeps the door again after
h and then press O0 Input 0/ SIO0 0/ SIO1 Input 1/
2 Input 1/ SIO2 1/ SIO3 Input 2/
and then press
or door opening nput 2/ Input 3/
0 Input 3/ SIO1 3/ SIO2 Input 0/
3 Input 0/ SIO3
eration type and
for the alarm to
rcibly unlocked.
alues: Not Used/
n be set through locked and then
■ Int
Select
After s Call ke screen
terphone S
[Menu] > [Device]
etting the interph ey on the BioStatio
s per interphone t
Setting
] > [Interphone].
hone, you can ma on T2 terminal. Th type.
ake a call by pres he following scree
ssing the ens show
1 Interphone (Not use/An 2 Video Serv video serve network adm 3 Video Serv
server Port, 4 VoIP Serve VoIP server 5 VoIP Phone the VoIP pho 6 VoIP Displa the VoIP na 7 VoIP Serve numbers an 8 VoIP Serve then press [ 9 VoIP Mic G
(0~10).
10 VoIP Spea (0~10).
: Select an interph nalog Interphone/IP ver IP: If you have er IP. If you don't ministrator.
er Port: Enter the v please ask your ne er IP: If you have
IP.
e Number: If you h one number.
ay Name: If you h me.
r ID: Enter the VoIP nd special character
er Password: Ente [OK].
Gain: Adjust the ker Gain: Adjust
hone to use and th Interphone)
selected IP Interp know server IP, p
video server port. If etwork administrator selected IP Interp
have selected IP In
have selected IP In
P server ID. You can rs.
er the VoIP server
volume of the Vo
the volume of the
hen press [OK].
phone, enter the please ask your
f you don't know r.
hone, enter the
nterphone, enter
nterphone, enter
n use alphabets,
r password and
oIP microphone
e VoIP speaker
Noote
e models are compattible with
■
S to S