C. Click a File type of Application.
D. Note the Application-File selection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Search to display the Select File window. Use this window to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filter in the Downloader pane and continue your search.
5. Download the application file.
A. Click Force download to start the download.
B. Remove and then reapply microcontroller power.
C. Click Download to continue the download.
How to Download a Kernel to a 196 Processor
T Downloading a 196 kernel deletes the application file in the 196 processor. After downloading the kernel, you will have to reinstall the application file.
1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicle’s engine.)
3. Start the WebGPI application, connect to the microcontroller, and display the Downloader pane.
A. Start the WebGPI application.
B. As needed, change the Port to match the PC COM port that you are using.
C. Click Connect to connect to the microcontroller.
If you get a Device is not responding message, click OK to close this message.
Click Download to display the Downloader pane and then perform a force download procedure, starting with step 4 on page 83.
4. Select and download a boot file.
A. Click a File type of Kernel.
B. Check the Boot-File selection.
5. Download a kernel file.
A. Check the Operating System File selection.
The WebGPI application will download this file to the microcontroller.
As needed, use the Search File window to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filter in the Downloader pane and continue your search.
B. Click Download to download the file.
Once you download the boot and kernel files, you must also download the application file to successfully complete this procedure.
6. Download an application file.
A. Click a File type of Application.
B. Check the Application-File selection.
The WebGPI application will download this file to the microcontroller.
As needed, use the Search File window to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filter in the Downloader pane and continue your search.
C. Click Download to download the file.
How to Force Download a Kernel to a 196 Processor
T Downloading a 196 kernel deletes the application file in the 196 processor. After downloading the kernel, you will have to reinstall the application file.
1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicle’s engine.)
3. Start the WebGPI application and display the Downloader pane.
A. Start the WebGPI application.
B. As needed, change the Port to match the PC COM port that you are using.
C. Click Download to display the Downloader pane.
4. Select and download the boot file.
A. Click OK to close the No micro selected message.
B. Click a Microcontroller type of 196.
C. Click a File type of Kernel.
D. Check the Boot-File selection.
5. Download a kernel file.
A. Check the Operating System File selection.
The WebGPI application will download this file to the microcontroller.
As needed, use the Search File window to browse to and select the right file. If you still cannot find the right file, uncheck the File name filter in the Downloader pane and continue your search.
B. Click Download to download the file.
Once you download the boot and kernel files, you must also download the application file to successfully complete this procedure.
6. Download an application file.
A. Click a File type of Application.
B. Check the Application-File selection.
The WebGPI application will download this file to the microcontroller.
As needed, use the Search File window to browse to and select the right file. If you still cannot find the right file, uncheck the File name filter in the Downloader pane and continue your search.
C. Click Download to download the file.
How to Download an Application or Defaults File to a 167 Processor
1. Connect an appropriate cable between a PC COM port and the microcontroller.
If you are using a Sauer-Danfoss KW02012 cable with a Prog/Read switch, set this switch to Read.
2. Apply power to the microcontroller. (When applying power to the microcontroller, do not start your vehicle’s engine.)
3. Start the WebGPI application, connect to the microcontroller, and display the Downloader pane.
A. Start the WebGPI application.
B. As needed, change the Port to match the PC COM port that you are using.
C. Click Connect to connect to the microcontroller.
D. Click Download to display the Downloader pane.
If you get a Device is not responding message, click OK to close this message.
Click Download to display the Downloader pane and then perform a force
4. Download an application or defaults file.
A. Click a File type of either Application or Defaults.
B. Check the Application-File selection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Search to display the Select File window. Use this window to browse to and select the right file. If you still cannot find the right file, uncheck the File name filter in the Downloader pane and continue your search.