specify the row to be edited (for row information, see the output of the
show security firewall ipv4 setup lan_wancommand), you enter the security-config [firewall-ipv4-lan-wan-outbound]
mode. You can then edit one keyword and associated parameter or associated keyword at a time in the order that you prefer. However, note that the setting of the action keyword determines which other keywords and parameters you can apply to a rule.
Step 1 Format security firewall ipv4 edit_rule lan_wan inbound <row id>
Mode security
Step 2 Format service_name {default_services <default service name> | {custom_services <custom service name>}
action {ALWAYS_BLOCK | ALWAYS_ALLOW |
BLOCK_BY_SCHEDULE_ELSE_ALLOW {schedule {Schedule1 | Schedule2 | Schedule3}} | ALLOW_BY_SCHEDULE_ELSE_BLOCK {schedule {Schedule1 | Schedule2 | Schedule3}}}
send_to_lan_server {SINGLE_ADDRESS {send_to_lan_server_start_ip
<ipaddress>} | ADDRESS_RANGE {send_to_lan_server_start_ip
<ipaddress>} {send_to_lan_server_end_ip <ipaddress>}}
translate_to_port_number enable {N | Y {translate_to_port_number port <number>}}
wan_destination_ip_address {WAN | OTHERS
{wan_destination_ip_address_start <ipaddress>} | RANGE {wan_destination_ip_address_start <ipaddress>}
{wan_destination_ip_address_end <ipaddress>}}
lan_user {address_wise {ANY | SINGLE_ADDRESS {lan_user_start_ip
<ipaddress>} | ADDRESS_RANGE {lan_user_start_ip <ipaddress>}
{lan_user_end_ip <ipaddress>}} | group_wise <group name>}
wan_user {ANY | SINGLE_ADDRESS {wan_user_start_ip <ipaddress>}
| ADDRESS_RANGE {wan_user_start_ip <ipaddress>}
{wan_user_end_ip <ipaddress>}}
log {NEVER | ALWAYS}
bandwidth_profile <profile name>
Mode security-config [firewall-ipv4-lan-wan-inbound]
Keyword (might consist of two separate words)
Associated Keyword to Select or Parameter to Type
Description
Service name, action, and schedule service_name
default_services
ANY, AIM, BGP, BOOTP_CLIENT, BOOTP_SERVER, CU-SEEME:UDP, CU-SEEME:TCP, DNS:UDP, DNS:TCP, FINGER, FTP, HTTP, HTTPS, ICMP-TYPE-3, ICMP-TYPE-4, ICMP-TYPE-5, ICMP-TYPE-6, ICMP-TYPE-7, ICMP-TYPE-8, ICMP-TYPE-9, ICMP-TYPE-10, ICMP-TYPE-11, ICMP-TYPE-13, ICQ, IMAP2, IMAP3, IRC, NEWS, NFS, NNTP, PING, POP3, PPTP, RCMD, REAL-AUDIO, REXEC, RLOGIN, RTELNET, RTSP:TCP, RTSP:UDP, SFTP, SMTP, SNMP:TCP, SNMP:UDP, SNMP-TRAPS:TCP,
SNMP-TRAPS:UDP, SQL-NET, SSH:TCP, SSH:UDP, STRMWORKS, TACACS, TELNET, TFTP, RIP, IKE, SHTTPD, IPSEC-UDP-ENCAP, IDENT, VDOLIVE, SSH, SIP-TCP, or SIP-UDP
The default service and protocol to which the firewall rule applies.
service_name custom_services
custom service name The custom service that you have configured with the security services add command.
action ALWAYS_BLOCK, ALWAYS_ALLOW, BLOCK_BY_SCHEDULE_ELSE_ALLOW, or ALLOW_BY_SCHEDULE_ELSE_BLOCK
The type of action to be enforced by the rule.
schedule Schedule1, Schedule2, or Schedule3
The schedule, if any, that is applicable to the rule.
LAN server addresses, port number translation, and WAN destination addresses send_to_lan_server ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
The type of LAN address.
send_to_lan_server_start_ip ipaddress There are two options:
• The IP address if the send_to_lan_server keyword is to SINGLE_ADDRESS.
• The start IP address if the send_to_lan_server keyword is set to ADDRESS_RANGE.
send_to_lan_server_end_ip ipaddress The end IP address if the
send_to_lan_server keyword is set to ADDRESS_RANGE.
translate_to_port_number
number The port number (integer) if port forwarding is enabled. Valid numbers are 0 through 65535.
wan_destination_ip_address WAN, OTHERS, or RANGE The type of destination WAN address for an inbound rule:
• WAN. The default IP address of the WAN (broadband) interface.
• OTHERS. Another public IP address, which you need to configure by issuing the
wan_destination_ip_address_start
keyword and specifying an IPv4 address.
• RANGE. A range of public IP addresses, which you need to configure by issuing the
wan_destination_ip_address_start
and
wan_destination_ip_address_end
keywords and specifying IPv4 addresses.
wan_destination_ip_address_start ipaddress There are two options:
• The IP address if the
wan_destination_ip_address keyword is set to OTHERS.
• The start IP address if the wan_destination_ip_address keyword is set to RANGE.
wan_destination_ip_address_end ipaddress The end IP address if the wan_destination_ip_address keyword is set to RANGE.
LAN user addresses or LAN group and WAN user addresses lan_user address_wise ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
The type of LAN address.
For an inbound rule, this option is available only when the WAN mode is Classical Routing.
lan_user_start_ip ipaddress There are two options:
• The IP address if the lan_users address_wise keywords are set to SINGLE_ADDRESS.
• The start IP address if the lan_users address_wise keywords are set to
ADDRESS_RANGE.
Keyword (might consist of two separate words)
Associated Keyword to Select or Parameter to Type
Description
Command example: See the command example for the security firewall ipv4 add_rule lan_wan inbound command.
Related show command: show security firewall ipv4 setup lan_wan