Access the INST. CLUSTER submenu via the SETTINGS menu. Use the INST. CLUS- TER submenu to change the instrument cluster display settings. The following functions are available:
Selecting temperature display mode
왘 Move the selection marker with theæ orç button to the INST. CLUSTER submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: TEMP. INDICATOR.
The selection marker is on the current setting.
왘 Pressæ orç to set the temper-
ature unit to degrees Celsius (°C) or degrees Fahrenheit (°F).
Selecting multifunction display mode
왘 Move the selection marker with theæ orç button to the INST. CLUSTER submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: DISPLAY VALUES IN.
The selection marker is on the current setting.
왘 Press æ or ç to set speedome-
ter unit to MILES or KM.
Function Page
Select temperature display mode
150 Select multifunction display
mode
149
Controls in detail
Control system
Selecting language
왘 Move the selection marker with theæ orç button to the INST. CLUSTER submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: TEXT.
The selection marker is on the current setting.
왘 Pressæ orç to select the lan- guage to be used for the multifunction display messages. Available languages: 앫 German 앫 English 앫 Italian 앫 French 앫 Spanish Lighting submenu
Access the LIGHTING submenu via the SET- TINGS menu. Use the LIGHTING submenu to change the lamp and lighting settings on your vehicle. The following functions are available:
Function Page
Set daytime running lamp mode (USA only)
see below
Set locator lighting 151
Exterior lamps delayed shut-off 152 Interior lighting delayed shut-off 153
Controls in detail
Control system
Setting daytime running lamp mode (USA only)
왘 Move the selection marker with theæ orç button to the LIGHT- ING submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: LAMP CIRCUIT HEADLAMP MODE . The selection marker is on the current setting.
왘 Pressæ orç to select manual
or daytime running lamp (constant) mode. This function is not available in countries where daytime running lamps are mandatory.
With daytime running lamp mode se- lected and the exterior lamp switch at position0, the following lamps will come on automatically when the en- gine is turned on:
앫 Parking lamps and low beam head- lamps
앫 License plate lamps (in low ambient light conditions)
Setting locator lighting
During darkness, the following lamps will come on when the exterior lamp switch is in position U, the locator lighting fea- ture is activated, and the vehicle is un- locked by remote control:
앫 Parking lamps 앫 Tail lamps
앫 License plate lamps 앫 Front fog lamps
The locator lighting switches off when the driver’s door is opened. It switches off au- tomatically after a period of approximately 40 seconds.
왘 Move the selection marker with theæ orç button to the LIGHT- ING submenu.
i
If you turn the exterior lamp switch to another position, the corresponding lamp(s) will switch on.
For safety reasons, resetting the LIGHTING submenu to factory settings (컄page 147) while driving will not re- set the daytime running lamp mode. In the display you will then see the mes- sage: LIGHTING – CANNOT BE TOTALLY RESET TO FACTORY SETTINGS WHILE DRIVING.
Controls in detail
Control system
왘 Press buttonj ork repeatedly until you see this message in the dis- play: LOCATOR LIGHTING.
The selection marker is on the current setting.
왘 Pressæ orç to select the de-
sired setting.
The locator lighting will be switched on or off.
Setting night security illumination (Exte- rior lamps delayed shut-off)
Use the HEADLIGHTS DELAYED SHUT-OFF function to set whether and for how long you would like the exterior lamps to illumi- nate during darkness after all doors are closed. When the delayed shut-off feature is activated and the exterior lamp switch is in position U, the following lamps will remain lit after you remove the SmartKey from the starter switch:
앫 Parking lamps 앫 Tail lamps
앫 License plate lamps 앫 Front fog lamps
왘 Move the selection marker with theæ orç button to the LIGHT- ING submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: HEADLIGHTS DELAYED SHUT-OFF. The selection marker is on the current setting.
컄컄
i
You can reactivate this function within ten minutes by opening a door. If you do not open a door after remov- ing the SmartKey, the lamps will auto- matically switch off after 60 seconds.
Controls in detail
Control system
왘 Pressæ orç to select the de- sired lamp-on period.
You can select:
앫 0 S, the delayed shut-off feature is deactivated
앫 15 S, 30 S, 45 S, or 60 S, the de- layed shut-off feature is activated
You can temporarily deactivate the de- layed shut-off feature:
왘 Before leaving the vehicle, turn the SmartKey in the starter switch to position0.
왘 Turn the SmartKey in the starter switch to position2 and back to0.
The delayed shut-off feature is deacti- vated. It will reactivate as soon as you reinsert the SmartKey in the starter switch.
Vehicles with KEYLESS-GO*:
왘 Press the KEYLESS-GO start/stop button on the gear selector lever (컄page 33).
Interior lighting delayed shut-off
Use this function to set whether and for how long you would like the interior light- ing to remain lit during darkness after the SmartKey is removed from the starter switch.
왘 Move the selection marker with theæ orç button to the LIGHT- ING submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: INT. LIGHTING DELAYED SHUT-OFF.
The selection marker is on the current
Controls in detail
Control system
왘 Pressæ orç to select the de- sired lamp-on time period. You can se- lect:
앫 0 S, the delayed shut-off feature is deactivated.
앫 5 S, 10 S, 15 S, or 20 S, the delayed shut-off feature is activated.
Vehicle submenu
Access the VEHICLE submenu via the SET- INGS menu. Use the VEHICLE submenu to make general vehicle settings. The follow- ing functions are available:
Setting station selection mode
Use the STATION SEARCH USING function to select the manual or memory station se- lection mode for the radio (컄page 136). 왘 Move the selection marker with
theæ orç button to the VEHI- CLE submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: STATION SEARCH USING.
The selection marker is on the current setting.
왘 Pressæ orç to select the de-
sired station selection mode. You can select:
앫 FREQUENCY
앫 MEMORY selects next stored station 컄컄
Function Page
Set station selection mode (radio)
see below Setting automatic locking 155
Controls in detail
Control system
Setting automatic locking
Use this function to activate or deactivate the automatic central locking. With the au- tomatic central locking system activated, the vehicle is centrally locked at vehicle speeds of approximately 9 mph (15 km/h).
왘 Press buttonæ orç to move the selection marker to the Vehicle submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: AUTOMATIC DOOR LOCK.
The selection marker is on the current setting.
왘 Pressæ orç to switch AUTOMATIC DOOR LOCK ON or OFF.
Convenience submenu
Access the CONVENIENCE submenu via the SETTINGS menu. Use the CONVENIENCE sub- menu to change the settings for a number of convenience features. The following functions are available:
Function Page
Setting key dependency see
below Activating easy-entry/exit fea-
ture
156 Setting parking position for exte- rior rear view mirror
158 Adjusting the drive-dynamic seat (drivers’s side)
159 Adjusting the drive-dynamic seat (passenger side)
159 Setting fold-in function for exteri- or rear view mirrors
158 Setting automatic locking 155
Controls in detail
Control system
Setting key dependency
Use this function to set whether the mem- ory settings for the seats, the steering wheel, the mirrors, and the automatic cli- mate control should be stored separately for each SmartKey (컄page 117).
왘 Move the selection marker with theæ orç button to theCONVENIENCE submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: SETTINGS KEY-DEPENDENT. The selection marker is on the current setting.
왘 Pressæ orç to set key depen- dency to ON or OFF.
Activating easy-entry/exit feature
Use this function to activate and deacti- vate the easy-entry/exit feature. When the feature is activated, the steering wheel and driver’s seat will move back to facilitate ex- iting when you:
앫 remove the SmartKey from the starter switch
앫 open the driver’s door
However, the engine must be turned off.
Warning!
G
You must make sure that no one can be- come trapped or injured by the moving steering wheel and the driver’s seat when the easy-entry/exit feature is in operation and the driver’s door is being opened or the SmartKey is removed from the starter switch.
Do not leave children unattended in the ve- hicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause an accident and/or serious personal injury.
Do not leave children unattended in the ve- hicle, or with access to an unlocked vehicle. Children could open the driver’s door and unintentionally activate the easy-entry/exit feature, which could result in an accident and/or serious personal injury.