Allows the system administrator to set system features on a per-tenant basis. Each system option has a corresponding dialling number, as listed below. All options toggle ON/OFF.
No Option Default Description
00 DISA PSWD ON When ON, a caller must enter extension number and DISA password when they call a DISA trunk. When OFF, extension number and DISA password are not required and the caller has full access to all features allowed on this trunk.
01 LCR ENABLE OFF This option determines whether the system will or will not route outgoing calls based on the information in the LCR routing tables
03 PERI UCD RPT OFF Periodic UCD Information provider. Enables UCD Statistics data on a per-UCD group basis to print out on the IO port which has been set as PERI UCD in real time (every 3~99 seconds). This allows the information to be interfaced and manipulated by an external package or third party provided software.
04 CID CODE INS OFF When ON, the system will insert the country code when re-ceiving CID information. This feature can use the CID display callback feature.
05 DISA MOH OFF When ON, outside parties will hear trunk MOH instead of dial tone from the time the system answers a DISA trunk until the caller dials a digit.
06 TRANSFER MOH
OFF When ON, outside parties will hear trunk MOH instead of ringback tone from the time a transfer is completed until the call is answered by an internal party.
08 DID BSY ROUT OFF When ON, a DID call directed to a busy station will re-route to the destination in MMC 406 for that trunk, if CW is set to OFF in MMC 714. If the CW option is set to ON the call will camp on. When OFF and the CW option is set to OFF, the call will re-route to the operator.
09 ALARM MOH ON When ON, a station user answering an alarm ring will hear station MOH instead of dial tone.
12 CONF TONE OFF When ON, provides conference tone. (Available in Australia and Italy only.)
13 RECALL PIKUP ON When ON, a call recalling to a station can be picked up using Direct Call Pickup, Pickup Group and My Group features.
This applies to held calls recalling and transferred calls re-calling to a station.
No Option Default Description
14 ICM EXT FWD OFF When ON, call forward external is allowed when intercom calls are placed to a station that has Call Forward External pro-grammed and set.
16 DID ERR TONE OFF This option provides error tone when an invalid DID number is received.
18 KTS DISC ALM OFF When ON, generates a system alarm when a phone discon-nects or condiscon-nects.
19 OFF HOOK ALM OFF When ON, generates a system alarm when a phone stays off-hook longer than this timer.
20 SL SELF RING OFF When ON, generates ring of 10 seconds when a single line phone dials itself and hangs up (self test).
21 SGR INC BUSY OFF When ON, generates busy tone when all station group members are busy for a group call. This does not work for station groups which have Unconditional Ring mode set.
24 TRANSFER CANCEL
OFF When OFF, a single line phone can handle 2 calls simulta-neously using the hook-flash to toggle between them. When ON, a single line phone can connect to the second call, but pressing the hook-flash will not toggle between the two calls it will disconnect the second call and reconnect the single line phone to the first call.
26 RECALL DISC OFF When ON, the system disconnects a transferred call when it recalls.
29 ARD TONE CHK ON When system detects CO BUSY TONE from Central Office, it returns to auto redial state.
30 VPN ENABLE OFF When ON, VPN is enabled. (Australia only.)
31 IN TOLL CHK OFF When OFF, the system doesn’t toll restrict incoming calls.
32 ISDN PROGCON
OFF When ON, if an outgoing call receives PROGRESS mes-sage from ISDN trunk, the call will connect without CON-NECT message.
33 INCLUDE VAT OFF When ON, an “Inclusive VAT of” line is printed on Hotel in-voices (Hotel Application).
36 DSS KEY DPU OFF When ON, pressing a DS key will pick up the call at a ringing station
37 BEGN DGT DSP OFF When ON, and an outside call is made via speed dial or LNR where more than 11 digits are dialled, then only the first 11 dialled digits are shown on the phone display.
38 ONE TCH FACC
OFF When OFF, phone users cannot use one-touch account code (ACC) key.
No Option Default Description
39 SGR ALL OUT OFF When ON, the last remaining station group member can leave a group.
40 CHAIN FWD ON If ON, an incoming call forwarded from a station to another station may then be forwarded to the mailbox of the second station, if the latter is set for ‘forward to voice mail’. If this option is OFF, the call may only be forwarded to the mailbox of the first station.
41 TRK MONITER OFF If ON, the system will monitor the trunk supervision signal-ling. That is, if a disconnection signal is received from the exchange, the call will be cleared and the extension will go back on hook.
42 VOIP MFRALOC OFF If ON, this allocates a DTMF receiver for a VOIP tandem caller breaking out on another trunk group.
43 NTWK AUTOTMR
OFF If OFF, the call timer in the phone display will not function if the call is from a network connection (Q-SIG).
44 USE EURO OFF If ON, the unit of currency shown in call displays and on SMDR reports will be Euros (€). (This will also display on Hotel Application invoices.)
45 NO STAFF COD
OFF When ON, the steps verifying the staff code will be omitted in Hotel operation.
46 PERI UCD SIO OFF When ON, the PERI UCD data will be sent to the SMDR IO port.
47 AUTO CLEANED
OFF Normally, when a room is checked-out, the room status is changed to NEED CLEAN. When the option is set to ON, the room status will be changed to AVAILABLE instead. (Hotel Application.)
48 REDIAL REVW OFF When ON, the CALL LOG review will appear when the Re-dial or LNR button is pressed.
50 ISDN KEYFAC OFF If ON, allows Keypad Facility messages to be sent to the exchange to invoke network features.
52 CHK SPV TRK OFF When ON, if trunks don’t have the supervision feature they cannot make outgoing transfers or unsupervised confer-ences.
53 PRE FWD BUSY
OFF When ON, and a call arrives at a busy station that is not set for forward busy, if a preset no answer destination is avail-able the call is re-routed to that destination.
54 ORG DIAL LOG OFF When ON, all dialled digits will be saved in the outgoing call log for Large LCD phones. When OFF, invalid dialling such as dialling of a non-existent station number will not be saved in the outgoing call log for Large LCD phones.
No Option Default Description
55 TIE TRSF RCL ON When ON, and a trunk call transferred to the tie line is not answered within the transfer recall time, the call is recalled to the original transferring station.
56 VOIP REALRBT OFF When ON, the system will connect the real path of the outgo-ing trunk to the incomoutgo-ing VoIP trunk user instead of providoutgo-ing virtual ringback tone.
57 CO-CO TM ALL OFF When ON, the system trunk call will be attached timer for preven the call from locking up
60 SMDR AUT2ACC
OFF When ON, the AUTHORIZATION CODE will be printed in ACCOUNT field of SMDR.
64 IPNW REAL RB OFF When ON, the system will connect the real path of the outgo-ing trunk to the VoIP networkoutgo-ing trunk user instead of provid-ing virtual rprovid-ingback tone.
66 TRK AUTO MOH
OFF When ON, an incoming trunk call is connected to MOH automatically after the DISA ANSWR timer (MMC 503) ex-pires and the caller hears MOH. If the TRK AUTOMOH DISC timer in MMC501 expires before the call is answered, it is disconnected. (To use this feature, MMC 400 AUTO AN-SWER option must set to ON.)
67 TRSF VT KEY ON When ON, works like the VT key when the user transfers the call to Voice Mail using the TRSF key.
68 PAIR NO RING OFF When ON, if a paired phone is busy the call camps on and a message waiting indication is set at the busy phone and does not ring the free paired extension.
69 DISA NO ACT OFF When ON, a DISA call will go to the station assigned in MMC 406 after the DISA NO ACT timer expires.
70 ICM AUTOHOLD
OFF When ON, will allow internal calls to be put on hold auto-matically when another call is taken.
DEFAULT DATA SEE DESCRIPTION
SOME OPTIONS DEPEND ON COUNTRY
ACTION DISPLAY 1. Press Transfer button and enter 210.
Display shows:
TEN. ON AND OFF DISA PSWD :OFF
2. Dial option number (e.g., 00)
Press Right Soft button to move cursor.
TEN. ON AND OFF
Press Volume button to make selection and press Right Soft button.
4. Repeat steps 2-3 for other options.
OR
Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next MMC.
RELATED ITEMS NONE