3. Current Plans in Four CEE Countries 39
3.3 Developments in Estonia 46
En base a los resultados obtenidos en las secciones 4.3.1 y 4.3.2 como a su vez uno de los objetivos de este trabajo de tesis es evaluar el desempeño de los recubrimientos de nitruro de carbono en un nivel macro-tribológico aplicando para ello un lubricante de origen vegetal (biolubricante formulado a partir de las semillas de cachichin) se seleccionó la formulación del biolubricante 2 cuya concentración de aditivo es al 10 % , el cual presentó resultados factibles en la reducción de desgate gravimétrico cuando se evaluaron probetas de acero sin recubrimiento aplicando las tres formulaciones del biolubricante.
En la Tabla 4.31 se presentan los resultados obtenidos en probetas de acero recubiertas de nitruro de carbono aplicando el biolubricante 2 al 10 % donde podemos aseverar lo siguiente en comparación con la serie 3 donde no existe lubricación ni recubrimiento hay una generación de desgate volumétrico mayor en comparación con la serie 4 aunque el hecho de que se encuentren recubiertas no significa que no exista desgate en esta serie donde coexistió la interacción recubrimiento-lubricante. En el proceso de caracterización tribológica las probetas RB1, RB2, RB3, RB4, RB5, RB6, RB7 y RB8 presentaron desprendimiento de recubrimiento al finalizar la evaluación con el tribómetro pin-disco y posterior a la remoción del biolubricante. La probeta que obtuvo menor desgate volumétrico fue la RB6 y la probeta que mayor desgate volumétrico genero fue la probeta RB8.
160
Tabla 4. 31. Resultados de la serie 4 de la caracterización tribológica donde las probetas están recubiertas por nitruro de carbono en condición de lubricación aplicando el biolubricante 2 al 10 %.
Nombre de identificación de la probeta Numeración de la probeta Peso Inicial (gr.) Peso Final (gr.) Desgaste gravimétrico (gr.) Desgaste volumétrico (mm3) 1CN10-R2 RB1 16.3479 16.34635 1.55E-03 0.20 2CN10-R2 RB2 15.6693 15.66795 1.35E-03 0.17 1CN11-R2 RB3 13.5066 13.50495 1.65E-03 0.21 2CN11-R2 RB4 14.0798 14.07815 1.65E-03 0.21 1CN12-R2 RB5 15.2767 15.27525 1.45E-03 0.18 2CN12-R2 RB6 15.147 15.14615 8.50E-04 0.11 1CN13-R2 RB7 15.3874 15.38375 3.65E-03 0.46 2CN13-R2 RB8 14.6019 14.5968 5.10E-03 0.65 1CN14-R2 RB9 14.8272 14.82435 2.85E-03 0.36 2CN14-R2 RB10 15.2977 15.2951 2.60E-03 0.33
En la Figura 4.30 se presenta los valores de rugosidad promedio calculada de la serie 4 donde la probetas se encuentran recubiertas de nitruro de carbono previo a la lubricación donde prácticamente el recubrimiento adquiero la rugosidad del sustrato, es decir, la probeta de acero. En el análisis de estos resultados nos muestran que la probeta RB4 obtuvo una rugosidad promedio menor de 0.08 µm en comparación con las demás probetas y la probeta que obtuvo el valor más elevado de rugosidad fue la probeta RB8 con un valor de 0.61 µm.
161
Figura 4.30. Correlación de la serie 4 de probetas de acero recubiertas de nitruro de carbono con respecto a su rugosidad promedio calculada previo a la lubricación con el biolubricante 2 al 10 %.
El análisis tribológico realizado nos emite que las probetas recubiertas con nitruro de carbono (serie 1) y las que no se encuentran recubiertas (serie 3) en una condición tribológica en seco se obtuvieron valores similares de generación de desgaste volumétrico a diferencia si existe una condición de lubricación donde prácticamente se reduce significativamente el desgate generado.
Las probetas recubiertas de nitruro de carbono en condiciones de lubricación presentaron cifras de disminución de desgaste no obstante la interacción recubrimiento-biolubricante en este caso es factible aunque existen factores que influyen en este tipo de caracterización como la carga aplicada, la velocidad, la temperatura así como también la cantidad de biolubricante que se aplica en el ensayo y el espesor del recubrimiento.
Probetas RB4 RB10 RB9 RB2 RB3 RB1 RB7 RB5 RB6 RB8 R ugos ida d prom e di o [µ m] 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Rugosidad promedio
162
CONCLUSIONES
Recubrimientos de nitruro de carbono
Se sintetizaron recubrimientos de nitruro de carbono depositados sobre sustratos de acero inoxidable 304, probetas de acero circulares AISI-SAE 4140, silicio, cuarzo y vidrio corning. Los análisis realizados permitieron determinar que todas las muestras obtenidas son de estructura amorfa. Se observo que las muestras depositadas sobre sustrato de silicio presentaron una resolución más explícita de los modos vibracionales D y G característicos del compuesto de nitruro de carbono amorfo. El efecto de la temperatura influyó en los procesos de difusión superficial como a su vez en la adherencia del recubrimiento. La muestra CN13 con un flujo de nitrógeno de 4.9 sccm, fue la que presento mayor dureza (27 GPa), trabajando sin temperatura. Los valores de dureza fueron obtenidos por micro- indentación, empleando el modelo de dureza de trabajo efectivo de indentación, el cual nos permite predecir la dureza del compuesto sustrato-recubrimiento.
El recubrimiento de nitruro de carbono que mostró ser más resistente al desgaste en una condición tribológica en seco fue el depositado bajo las condiciones de crecimiento de la muestra CN15, el cual fue crecido bajo una razón de gases (Ar/N2) de 15/5.0 sccm y con un
espesor aproximado de 0.5 µm.
Biolubricante
El aceite extraído del cachichin representa una fuente idónea para la formulación o elaboración de biodiesel y en su defecto de biolubricantes debido a que presentó un rendimiento aproximado del 45 %.
La evaluación reológica de las tres formulaciones (5, 10 y 15 % de aditivo) del biolubricante presentó un comportamiento pseudoplástico. Mostraron un desempeño competitivo con respecto al aceite de referencia (aceite castrol 15W 40).
163
La interacción generada por los recubrimientos de nitruro de carbono amorfo con el biolubricante con sus tres formulaciones caracterizados por MFA presentaron valores de coeficiente de fricción en un rango de 0.174 y 0.911 en seco, siendo favorecidos los recubrimientos en una condición de lubricación disminuyendo la fricción generada por el sistema debido a que se obtuvieron valores en un rango de 0.05 y 0.11 de coeficiente de fricción mediante esta caracterización.
En un nivel macro-tribológico la interacción recubrimiento-biolubricante generada por la caracterización por medio del tribómetro pin-disco nos proporcionó resultados donde se mostro disminución de desgate en un ambiente de lubricación concluyendo así que el desempeño de los recubrimientos de nitruro de carbono amorfo incrementa su eficiencia con la adición de un lubricante.
164
REFERENCIAS
(Arpel-lica, 2009) Arpel-lica. Manual de Biocombustibles. ARPEL pág. 1-6, 12 (2009).
(Bai et al., 2000) M. Bai, K. Kato, N. Umehara, Y. Miyake, J. Xu and H. Tokisue, Surf. Coat. Technol. 126, 181 (2000). (Bailey, 2001) A. E. Bailey, “Aceites y grasas industriales”. Reverte,
pp. 67, 68, 82, 83 (2001).
(Barnes et al., 1993) H. A. Barnes, J.F. Hutton, K. Walters F.R.S, “An Introduction to rheology”. Elsevier, pp 1 (1993).
(Beeman et al., 1984) D. Beeman, J. Silverman, R. Lynds, M.R. Anderson, Phys. Rev., B 30 870 (1984).
(Bhattacharyya et al., 1998) S. Bhattacharyya, C. Cardinaud, G. Turban, J. Appl. Phys. 83, 4491 (1998).
(Bhushan, 2005) B. Bhushan, “Nanotribology and Nanomechanics. An Introduction”. Springer, pp. 70-74,119-120, 315-317 (2005).
(Broitman et al., 2001) E. Broitman, N. Hellgren, K. Jarrendahl, M.P. Johanson, S. Olafsson, J. E. Sundgren, and L. Hultman, J. Appl. 89, 1184 (2001)
(Broitman et al., 2001) E. Broitman, N. Hellgren, O. Wanstrand, M.P. Johansson, T. Berlind, H. Sjostrom, J.-E. Sundgren, M. Larsson and L. Hultman, Wear 248, 55 (2001). (Bull & Rickerby, 1990) S.J. Bull, D.S. Rickerby, Surf. Coat. Technol. 42, 149
(1990).
(Bull, 1999) S.J. Bull, Wear 233–235, 412 (1999).
(Bunshah, 2001) R. F. Bunshah, HANDBOOK OF HARD COATINGS
Deposition Technologies, Properties and Applications, pp 1-2 (2001).
(Burnett & Rickerby, 1987) P.J. Burnett, D.S. Rickerby, Thin Solid Films 148, 41 (1987).
(Butyagin, 1997) P. Yu Butyagin, Colloid J. 59, 112 (1997).
(Callister, 1996) W. D. Callister, Jr., “Introducción a la Ciencia e Ingeniería de los Materiales”. Reverte, pp. 136-139 (1996).
(Cameron, 2003) D.C. Cameron, Surface & Coatings Technology 169- 170, 245 (2003).
(Carballo, 1996) Carballo, A. Análisis fisicoquímico de alimentos e identificación de tóxicos de Oecopetalum mexicanum (“cachichín”) y Dioon spinulosum (“chicalito”). Tesis. Facultad de Química Farmacéutica Biológica. Universidad Veracruzana-Xalapa, México (1996). (Castellan, 1983) G. W. Castellan, “PhysicalChemistry”, 3ed. Addison-
Wesley, pp. 703,704 (1983).
165
Surf, Coat. Technol., 54-55, 360-364 (1992). (Cheng et al., 1999)
(Cheng et al., 2001) Y. H. Cheng, B. K. Tay, S. P. Lau, X. Shi, X. L. Qiao, Z. H. Sun, J. G. Chen, Y. P. Wu, C.S. Xie, Diamond Relat. Mater. 10, 2137-2144 (2001).
(Chowdhury et al., 1998) Y.H. Cheng, Y.P. Wu, J.G. Chen, X.L. Qiao and C.S. Xie, Diam. Relat. Mater. 8, 1214 (1999).
(Cohen et al., 1998) S. Cohen, L. Rapoport, E. A. Ponomarev, H. Cohen, T. Tsirlina, R. Tenne, and C. Levy-Clement, The tribological properties of type II texturated MX2 (M=Mo, W; X= S, Se), Thin Solid Films, vol. 324, p. 190, (1998).
(Cohen, 1985) M. L. Cohen: Phys. Rev. B, 32B, 7988 (1985). (Cohen, 1993) M.L. Cohen, Science 261,307 (1993).
(Convenio Interinstitucional de Cooperación UPME- INDULPALMA, 2003. Programa estratégico para la producción de biodiesel-combustible automotriz a partir de aceites vegetales: Autor)
Convenio Interinstitucional de Cooperación UPME- INDUPALMA-CORPODIB.PROGRAMA
ESTRATÉGICO PARA LA PRODUCCIÓN DE BIODIESEL-COMBUSTIBLE AUTOMOTRIZ-A PARTIR DE ACEITES VEGETALES. Enero 41-42 (2003).
(Courtney & Eisner, 1957) J.S. Courtney-Pratt and E. Eisner, The effect of a tangential force on the contact of metallic bodies, Proc. Roy. SOC. London, A 238, pp 529 (1957).
(Crewe, 1971) A.V. Crewe, “High intensity electron sources and scanning electron microscopy, in Electron microscopy in material science”, ed. U. Valdre, Academic Press, New York, 162-207 (1971).
(Cui & Li, 2000) F.Z. Cui y D.J. Li, Surface & Coatings Technology 131, 481 (2000).
(Cullity, 1978) B. D. Cullity, “Elements of X-Ray Difraction”, 2ed. Addison-Wesley, pp. 92,93,95,96 (1978).
(Cutiongco et al., 1995) E. C Cutiongco, D. Li., Y. W. Chung and C. S. Bhatia, Tribological behavior of amorphous carbon nitride overcoats for magnetic thin-film rigid disks, In P.A. Sutor (ed.), STLE/ASME Tribology Conf., Orlando, FL, ASME, , New York, NY., pág. 1 (1995).
(Czichos, 1978) H. Czichos, “Tribology a systems approach to the science and technology of friction, lubrication and wear”. Tribology series, 1, Elsevier Chapter 4 (1978). (Davis et al., 1932) G.H.B. Davis, G.M. Lapeyrouse and E.W. Dean,
Applying Viscosity Index to Solution of Lubricating Problems, Journal of Oil and Gas, Vol. 30, pp. 92-93 (1932).
(Dean & Davis, 1929) E.W. Dean and G.H.B. Davis, Viscosity Variations of Oils With Temperature, Chem. and Met. Eng., Vol. 36, pp. 618-619 (1929).
166
(DeGarmo et al., 1998) E. P. DeGarmo, J. T. Black, R. A. Kohser, “Materiales y procesos de fabricación”. Reverte, pp. 53 (1998). (Delrio, 2005) Delrio, F. W. et al. The role of van der Waals forces in
adhesion of micromachined surfaces. Nature Mater. 4, 629–634 (2005).
(Dergal, 1990) S. B. Dergal, “Química de los alimentos”. Alhambra, pp. 123, 231 (1990).
(Donnet, 1995) C. Donnet, Condensed Matter News, 4(6) (1995) 9. (Dupont et al., 1985) H. Dupont Durst, G. W. Gokel. Química orgánica
experimental. Reverte. Pág. 33 (1985).
(Ech-chamilkh et al., 1994) Ech-chamilkh, E.L. Ameziane, M. Azizan, A. Bennouna, J.L. Fave, J. Cernogoraa, Y. Bounouh, M.L. Theye, Sol. Energy Mater. Sol. Cells 33, 443 (1994).
(Ech-chamilkh et al., 2006) E. Ech-chamilkh, A. Essafti, M. Azizan, Y. Ijdiyaou, Sol. Energy Mater. Sol. Cells 90, 1424-1428 (2006). (Egerton, 2005) R. F. Egerton, “Physical Principles of Electron
Microscopy. An Introduction to TEM, SEM, and AEM”. Springer, pp. 147, 148 (2005).
(Erdemir, 2001) A. Erdemir, in: Modern Tribology Handbook, Vol. II, ed. B. Bhushan (CRC Press, Boca Raton, FL, 2001) p. 787.
(Essafti et al., 2008) A. Essafti, E. Ech-chamikh, Y. ljdiyaou, M. Azizan, Spectroscopy Letters, 41, 136-143 (2008).
(Fao, 1993) Fao. Grasas y aceites y productos derivados. Food & Agricultures Org. Segunda edición. Pag 9, 21-22, 41- 42 (1993).
(Fernandez et al., 2003) A. Fernandez, C. Fernandez-Ramos and J.C. Sanchez- Lopez, Surf. Coat. Technol., 527,163–164 (2003). (Fernandez et al., 2004) J. Fernandez-Palacio, I. Arce-Garcia and S.J. Bull,
Tribol. Int. 37 ,929 (2004).
(Ferrari & Robertson, 2000) A.C. Ferrari, J. Robertson, Phys. Rev. B 61 14095 (2000)
(Ferrari & Robertson, 2001) A.C. Ferrari, J. Robertson, Phys. Rev .B 64 075 414 (2001).
(Ferrari et al., 2003) A.C. Ferrari, S.E. Rodil, J. Robertson, Phys. Rev., B 67, 155306 (2003).
(Godet et al., 2002) C. Godet, N.M.J. Conway, J.E. Boureé, K. Bouamra, A. Grosman, C. Ortega, J. Appl. Phys. 91,4154 (2002).
(Gonzaléz & Mancini, 2003) W. González V., H. L. Mancini, “Ciencia de los Materiales”, Editorial Ariel, pp.52 (2003).
(González, 2005) F. J González Fernández. Teoría y práctica del mantenimiento industrial avanzado. FC editorial, 129 (2005).
(Graciani, 2006) E. Graciani Constante, “Los aceites y grasas: composición y propiedades”. Mundi-Prensa libros, pp.
167
230, 231 (2006).
(Greenwood & Williamson, 1966) J. A. Greenwood and J. B. P. Williamson, Proc. R. Soc. London, Ser. A 295, 300 (1966).
(Grill, 1999) A. Grill, Diamond and Related Materials 8, 428 (1999).
(Groover, 1997) Mikell P. Groover. Fundamentos de manufactura moderna: materiales, procesos y sistemas. Pearson Educación 107 (1997).
(Gubischa et al., 2005) M. Gubischa, Y. Liub,*, L. Spiessa, H. Romanusa, S. Krischokb, G. Eckec, J.A. Schaeferb, Ch. Knedlika Nanoscale multilayer WC/C coatings developed for nanopositioning: Part I. Microstructures and mechanical properties Thin Solid Films 488 132 – 139 (2005).
(Guruz et al., 2001) M.U. Guruz, V.P. Dravid, Y.W. Chung, M.M. Lacerda, C.S. Bhatia, Y.H. Yu, et al., Thin Solid Films 381,6 (2001).
(Gutiérrez, 1994) Gutiérrez, B. Icacinaceae. In: Sosa, V. and Gómez- Pompa, A. (Eds.). Fascículo No.80. Flora de Veracruz. Instituto de Ecología, A.C. and University of California, Xalapa, Veracruz, México (1994).
(Gwidon et al., 20059 Gwidon W. Stachowiak, Andrew W. Batchelor, Engineering Tribology, Butterworth-Heineman, 3, pp. 713 (2005).
(Haddon et al., 1993) R. C. Haddon, R. E. Palmer, H. W. Kroto, P. A. Sermon, “The fullerenes: powerful carbon-based electron acceptors”, Philos. T. Roy. Soc. A 343, 53-62 (1993).
(Heimann et al., 1997) R. B. Heimann, S. E. Evsyukov, Y. Koga, “Carbon allotropes: a suggested classification scheme based on valence orbital hybridization”, Carbon 35, 1654-1658 (1997).
(Hellgren et al., 1999) N. Hellgren, M.P. Johansson, E. Broitman, L. Hultman and J.E. Sundgren, Phys. Rev. B 59(7),5162 (1999).
(Holloway et al., 1996) B.C Holloway, D. K. Shuh, M. A. Kelly, W. Tong, J. A. Carlisle, I. Jimenez, D. G. J. Sutherland, L. J. Terminello, P. Pianetta, S. Hagstrom, Thin Solid Films 290-2091, 94-98 (1996).
(Holmberg & Matthews, 1994) K. Holmberg and A. Matthews, in: Coatings Tribology, ed. D. Dowson, (Elsevier, Netherlands, 1994) p.1.
(Hu & Zabinski, 2005) J. J. Hu and J. S. Zabinski, Nanotribology and lubrication mechanismos of inorganic fullerene like MoS2 nanoparticles investigated using lateral Force Microscopy, Tribology letters, vol. 18(2), pp. 173 (2005).
168
(Ingolea et al., 2005) S. Ingolea, H. Lianga, M. Ustab, C. Bindalc, A.H. Ucisikd, Multi-scale wear of a boride coating on tungsten. Wear 259, 849–860 (2005).
(Jaimez-Diaz, 2010) Jaimez-Diaz Samuel, Tesis: Obtención de un biolubricante a partir de semillas de segunda generación: cachichin (Oecopetalum mexicanum), Universidad Veracruzana, Fac. de Ing. Química Campus Xalapa (2010).
(JEOL Ltd., 2010) JEOL Ltd. (2010). SEM “Scanning Electron Microscope A to Z”, Basic Knowledge for Using the SEM, Serving Advanced Technology JEOL, de http://www.jeol.com/.
(Johnson, 1997) Johnson, K. L. Adhesion and friction between a smooth elastic spherical asperity and a plane surface. Proc. R. Soc. Lond. Ser. A 453, 163–179 (1997). (Joly et al., 2005) L. Joly-Pottuz, F. Dassenoy, M. Belin, B. Vacher, J.
M. Martin, and N. Fleishauer, Ultra low friction and wear properties of IF-WS2 under boundary lubrication, Tribology letters, vol. 18 (4), pp. 477 (2005).
(Jonsson & Hogmark, 1984) B. Jonsson, S. Hogmark, Thin Solid Films 114, 257 (1984).
(Kalpakjian et al., 2002) S. Kalpakjian, S. R. Schmid, G. Tr. S. García, “Manual, ingeniería y tecnología”, 4 ed., Person Educación, pp. 95,96 (2002).
(Kaufman et al., 1989) J.H. Kaufman, S. Metin, D.D. Saperstein, Phys. Rev. B 39 (18),13053 (1989).
(Kaufmann, 2003) E. N. Kaufmann, “Characterization of Materials”. V1, Wiley-Interscience, pp. 698,701, 702 (2003).
(Keithley Instruments, Inc, 2004) Keithley Instruments, Inc (2004). Low Level Measurements Handbook, Precision DC Current, Voltage, and Resistance Measurements, Sixth Edition, pp. 1-5-1-7.
(Klaus et al., 1985) E.E. Klaus, D.I. Ugwuzor, S.K. Naidu and J.L. Duda, Lubricant-Metal Interaction Under Conditions Simulating Automotive Bearing Lubrication, Proc. JSLE International Tribology Conf., 8-10 July Tokyo, Japan, Elsevier, pp. 859-864 (1985).
(Kohzaki et al., 1997) M. Kohzaki, A. Matsumuro, T.Hayashi,
M.Muramatsu, K. Yamaguchi, Thin Solid Films, 239, 308-309 (1997).
(Komvopoulos, 1999) W. Lu, K. Komvopoulos, J. Appl. Phys. 86 ,2268 (1999).
(Korsunsky et al., 1998) A. M. Korsunsky, M. R. McGurk, S. J. Bull, T. F. Page, Surf. Coat. Technol. 99, 171-183 (1998).
(Korsunsky et al., 2000) J.R. Tuck, A.M. Korsunsky, R.I. Davidson, S.J. Bull, D.M. Elliott. Modelling of the hardness of
169
electroplated nickel coatings on copper substrates. Surface and Coatings Technology 127, 1-8 (2000). (Kundoo et al., 2003) S. Kundoo, K.K. Chattopadhyay, A.N. Banerjee, S.K.
Nandy, Vacuum 69, 495 (2003).
(Kundryavtsev et al., 1997) Y. P. Kundryavtsev, S. Evsyukov, M. Guseva, V. Babaev, V. Khvostov, “Carbyne – A linear chainline carbon allotrope”, Cap. 1 en Chemistry and Physics of Carbon, P. A. Thrower Edt., vol. 25, pp. 2-70 (1997). (Kurt et al., 1979) R. Kurt, R. Sanjines, A. Karimi, F. Lévy, Diamond
and Realed Materials 9,566-572 (2000).
R. McWeeny, Coulson’s Valence, Oxford University, (1979).
(Kusano et al., 2000) Y. Kusano, Z.H. Barber, J.E. Evetts, I.M. Hutchings, Surf. Coat.T echnol. 124 ,104 (2000).
(Lagrini et al., 2005) A. Lagrini, S. Charvet, M. Benlahsen, C. Debiemme- Chouvy, C. Deslouis, H. Cachet, Thin Solid Films 482, 41-44 (2005).
(Lanter et al., 1999) W. C. Lanter, D. C. Ingram, C. A. DeJoseph Jr., Diamond Relat. Mater. 15 , 259 (1999).
(Lanter et al., 2006) W. C. Lanter, D. C. Ingram, C. A. DeJoseph Jr., Diamond Relat. Mater. 15 (2006) 259-263
(Lascurain et al., 2007) Lascurain, M., Angeles, G., Ortega Escalona, F., Ordoñez Candelaria, V. R., Ambrosio, M. and Avendaño, S. Características anatómicas y propiedades mecánicas de la madera de Oecopetalum mexicanum Greenm. & C.H. Thomps. (Icacinaceae): cachichín de la sierra de Misantla, Veracruz, México. Madera y Bosques 13(2):83-95 (2007).
(Lejeune et al., 2003) M. Lejeune, O. Durand-Drouhin, S. Charvet, A. Grosman, C. Ortega, M. Benlahsen, Thin Solid Films 444 (2003) 1.
(Levenspiel, 1993) O. Levenspiel, “Flujo de Fluidos e Intercambio de Calor”. Reverte, pp. 89-93 (1993).
(Li et al., 1993) D. Li. C. Yip-Wah, W. Ming-Show and W. D. Sprovl, J. Appl. Phys., 74, 219-233 (1993).
(Lin et al., 1997) D. Y. Lin, C.F. Li, Y.S. Huang, Y.C. Jong, Y.F. Chen, C.K. Chen, K.H. Chen, D.M. Bhusari, Phys. Rev.B 56, 6498 (1997).
(Liu & Cohen, 1989) A. Y. Liu and M. L. Cohen: Science, 245, 841 (1989). (Lu et al., 1998) Y.F. Lu, Z.M. Ren, W.D. Song, D.S. Chan, J. Appl.
Phys. 84, 2133 (1998).
(Luan et al., 2005) Luan, B. & Robbins, M. O. The breakdown of continuum models for mechanical contacts. Nature 435, 929–932 (2005).
(Luan et al., 2006) Luan, B. & Robbins, M. O. Contact of single asperities with varying adhesion: comparing continuum mechanics to atomistic simulations. Phys.
170
Rev. E 74, 026111 (2006).
(Malkin, 1994) A. Ya. Malkin, “Rheology Fundamentals”. ChemTec Publishing, pp.6 (1994).
(Mansot et al., 2008) J. L. Mansot, K. Delbe, P. Thomas, tribo-synthesis of graphite Lithium intercalated compounds, proceedings of the Am. Chem. Soc. Meeting, New Orleans (2008). (Marton et al., 1994) D. Marton, K.J. Boyd, A.H, Al-Bayati, S.S. Todorov
and J.W. Rabalais, Phys. Rev. Lett,, 73, 118-121 (1994).
(Matysina et al., 2004) Z. A. Matysina, D. V. Schur, S. Yu. Zaginaichenko, V. B. Molodkin, A.P. Shpak, Hidrogen Materials Science and Chemistry of Carbon Nanomaterials, 1-24 (2004).
(McKenzie et al., 1994) D.R. McKenzie, Y. Yim, N.A. Marks, C.A. Davis, B.A. Pailthorpe, G. Amaratunga, and V.S. Veerasamy, Diam. Real. Mater. 3,353 (1994).
(Mendez et al., 1999) J. M. Méndez, A. Gaona-Couto, S. Muhl, S. Jiménez- Sandoval, J. Phys.: Condens. Matter 11 5225 (1999). (Méndez, 2010) Alma D. Méndez H. “Extracción y caracterización del
aceite de la semilla Oecopetalum mexicanum (Cachichin) dirigido a la obtención de un biolubricante”. Tesis Q. Ind., UV-Facultad de Ciencia Químicas, págs. 28, 29 (2010).
(Michel & Cohen, 1997) C. Michel, M.L. Cohen, Physics Review B 55 5684 (1997).
(microworld, 2009) microworld (2009), de http://www.four-point- probe.eu/#/welcome/3241794
(Miller et al., 2003) D. D. Miller, M. C. tr Sangines Franchini, M. rev. C. Torre Marina, “Química de alimentos: Manual de laboratorio”. Universidad de Costa Rica, pp. 22, 27-29 (2003).
(Mindil, 1949) R.D. Mindlin, Compliance of elastic bodies in contact, Trans. ASME, J. Appl. Mech., 71, pp 259 (1949). (Mo et al., 2009) Yifei Mo, Kevin T. Turner & Izabela Szlufarska,
Nature Lett. 457, 1116-1119 (2009).
(Muhl & Mendez, 1999) S. Muhl, J.M. Mendez, Diamond Relat. Mater. 8,1809 (1999).
(Normand et al., 2001) F. Le Normand, J. Hommet, T. Szörényi, C. Fuchs, E. Fogarassy, Phys. Rev .B 64 235 416 (2001).
(O’Connor et al., 1968) J.J. O’Connor, J. Boyd, E.A. Avallone, Standard Handbook of Lubrication Engineering, McGraw-Hill Book Company. (1968).
(Ogata et al., 1994) K. Ogata, J. Fernando Diniz Chubaci and Fujimoto, J. Appl. Phys., 76, 3791-3796 (1994).
(Ojeda, 1997) J. L. Ojeda Sahagú, “Métodos de microscopia
electrónica de barrido en biología”. Universidad de Cantabria, pp. 23, 24, 25 (1997).
171
(Ortuño, 2006) M. F. Ortuño Sánchez. Manual Práctico de aceites esenciales, aromas y perfumes. Pag.99-100 (2006). (Poole & Owens, 2007) C.P. Poole, F. J. Owens, Introducción a la
nanotecnología, ed. Reverte, págs. 114,115 (2007). (Precht et al., 1999) W. Precht, M. Pancielejko, A. Czyzniewski, Vacuum
53,109 (1999).
(pveducation, 2010) pveducation (2010), de
http://pvcdrom.pveducation.org/CHARACT/4pp.HTM
(Qi et al., 2001) Jun Qi, C. Y. Chan, I. Bello, C.S. Lee, S.T.Lee, J.B. Lou, S.Z. Wen, Surf. Coat. Technol. 145, 38-43 (2001).
(Rapoport et al., 1999) L. Rapoport, Y. Feldman, M. Homyonfer, H. Cohen, J. Sloan, J. L. Hutchison, and R. Tenne, Inorganic fullerene like materials as additives to lubricants: structure-function relationship, Wear, vol. 225-229, pp. 975, (1999).
(Rapport et al., 1997) L. Rapport, Y. Bilik, Y. Feldman, M. Homyonfer, S. R. Cohen and R. Tenne, Hollow nano-particles of WS2 as potential solid state lubricants, Nature , vol. 387, pp. 791, (1997).
(Robertson, 1986) J. Robertson, Adv. Phys. 35 ,317 (1986).
(Robertson, 1992) J. Robertson, Surf.Coat.Technol, 50 pg. 185 (1992). (Robertson, 2002) J. Robertson, Materials Science and Engineering R 37,
129- 281 (2002).
(Rodil et al., 2001) S. E. Rodil. A. C. Ferrari. J. Robertson, and W. I. Milne, J. Appl. Phys 89, 5425 (2001).
(Rodil, 2003) S. E. Rodil: Recent Res. Dev. Appl. Phys., 6, 391 (2003).
(Rodil, 2006) S.E. Rodil, Surface Engineering, V22, N5 321 (2006). (RTI International Metals, Inc,
2009)
RTI International Metals, Inc (2009). SEM (Microscopio electrónico de barrido) EDS (Espectroscopia de Energia Dispersiva), de http://es.rtiintl.com/sem-eds.html.
(Rubinson & Rubinson, 2000) K. A. Rubinson, Judith F. Rubinson,“Analisis Instrumental”. Prentice Hall, pp.462, 463, 466, 473 (2000).
(Sanchez et al., 2003) N. A. de Sánchez, G. Zambrano, P. Prieto, Revista colombiana de física, 35, 1, 34-3(2003).
(Sanz, 2002) I. Sanz Berzona. Practicas de química orgánica: experimentación y desarrollo. Ed. Univ. Politéc Valencia, pág. 33 (2002).
(Scharf et al., 1999) T.W. Scharf, R.D. Ott, D. Yang and J.A. Barnard, J. Appl. Phys. 85(6), 3142 (1999).
(Schey, 1983) Schey, J. A., Tribology in Metalworking-Friction, Lubrication and Wear, American Society for Metals, Metals Park, Ohio (1983).
172
(Schwan et al., 1996) J. Schwan, S. Ulrich, V. Batori, H. Ehrhardt, and S. R. P. Silva, J. Appl. Phys. 80, 440 (1996).
(Seagate Tecnology, Hundai Electronics American, IBM, 2001)
CNx films are being used by the computer magnetic industry as a protective overcoat (for example, Seagate Technology, Hyundai Electronics America, IBM, and Western Digital in the United States) and as a protective coating in special tools (for example, Impact Coatings AB in Sweden). (2001)
(Siegel, 1996) R. W. Siegel, Nanophase materials: Structure, defects and properties (Proc. ATC Int. Symp.), (1996).
(Silva et al., 1997) S.R.P. Silva, J. Robertson, G.A.J. Amaratunga, B. Rafferty, L.M. Brown, J. Schawan, D.F. Franceschini y G. Mariotto, Journal Applied Physics 81 2626 (1997).
(Silva, 2003) S. R. P. Silva, Properties of Amorphous Carbon, ed INSPEC, págs 4, 5, 21 (2003).
(Skoog et al., 2001) D. A. Skoog, F. J. Holler, T. A. Nieman,“ Principles of Instrumental Analysis”,5ed. Mc Graw Hill, pp. 128, 297,298, 593-596 (2001).
(Stachowiak & Barchelor, 2005) G.W. Stachowiak, A. W. Batchelor, “Engineering Tribology”. Butterworth Heinemann, pp 16-18 (2005). (Stepina & Vesely, 1992) V. Stepina, V. Vesely. Lubricants and special Fluids,
Tribology series, 23. ELSEVIER 2, 9 (1992).
(Stolarski & Tobe, 2000) T. A. Stolarski and S. Tobe, “Tribology in Practice Series Rolling Contacts”. Professional Engineering Publishing, pp. 1 (2000).
(Sue & Chang, 1995) J.A. Sue, T.P. Chang, Friction and wear behavior of titanium nitride, zirconium nitride and chromium Nitride coatings at elevated temperatures. Surf. Coat. Tecnhlog. 76 – 77, 61 – 69 (1995).
(Sung & Sung, 1996) Ch. M. Sung and M. Sung: Mater. Chem. Phys., 43, 1 (1996).
(Tajima et al., 2000) N. Tajima, H. Saze, H. Sugimura, O. Takai, Vacuum 59, 567 (2000).
(Takai et al., 2001) O. Takai, N. Tajima, H. Saze, H. Sugimura, Surf. Coat. Technol. 142-144, 719 (2001).
(Takeuchi, 2009) N. Takeuchi, Nanociencia y nanotecnología, ed. La ciencia para todos, págs. 96-103 (2009).
(Tenne et al., 1998) R. Tenne, M. Homyonfer, and Y. Feldman, Nanoparticles of layered compounds with hollow cage structures, Chemistry of materials, vol. 10(11), pp. 3225 (1998).
(Teter & Hemley, 1996) D.M. Teter y R.J. Hemley, Science 271 53 (1996). (Thomas et al., 2006) P.Thomas, K. Delbe, D. Himmel, J. L. Mansot, K.
Guerin, M. Dubois, C. Delabarre, A. Hamwi, Tribological properties of low-temperature graphite fluorides. Influence of the structure on the lubricating
173
performances, J. Phys. Chem. Solids, vol. 67 n 5-6, pp 1095, (2006).
(Thomas et al., 2009) P. Thomas, K. Delbe, D. Himmel, J.L. Mansot, M. Dubois, K. Guerin, W. Zhang, A. Hamwi, ”Tribological properties offluorinated carbon nanofibres”, Tribology Letters, vol.34 n1, p.49, (2009).
(Thomas, 1987) A. Thomas, Surf. Eng. 3, 117 (1987).
(Thomson Delphion, 2011) Thomson Delphion (2011) patentes obtenidos de http://www.delphion.com
(Todorov et al., 1994) S.S. Todorov, D. Marton, K.J. Boyd, A.H. Al-Bayati and J. W. Rabalais, J. Vac. Sci. Technol. A, 12, 3192- 3199 (1994).
(Torres et al., 2008) M. V. Torres, M. B. Santiago, L. A. P. Carranza. Transferencia de tecnología de máquina Tribológica automatizada a la industria metal-mecánica y/o la enseñanza. (2008).
(Tuinstra & Koening, 1970) F. Tuinstra, J. L. Koening, J. Chem. Phys. 53 1126 (1970).
(Umehara, 1998) N. Umehara, K. Kato and T. Sato, Proc. Int. Conf. Metallurgical Coat. Thin Films, 151 (1998).
(Umehara, 2000) N. Umehara, M. Tatsuno and K. Kato, Proc. Int. Trib. Conf. Nagasaki, 1007 (2000).
(Vepr��k & Reiprich, 1995) S. Veprêk y S. Reiprich, Thin Solid Films 268, 64 (1995).
(Veprek, 1999) Veprek S., J. Vac. Sci. Technol. A 17, Sept 5 (1999). (Victoria et al., 2000) N.M. Victoria, P. Hammer, M.C. Dos Santos, F.
Alvarez, Phys. Rev. B 61,1083 (2000).
(Villa, 2007) María R. Villa G. Manual de prácticas química general, Universidad de Medellín, segunda edición. Pág. 52 (2007).
(Wang, 1997) E.G.Wang, Prog. Mater.Sci., 41 pp. 241 (1997).
(Wei et al., 1998) B. Wei, B. Zhang, K.E.Johnson, J. Appl.Phys.83 2491 (1998).
(Wei et al., 1999) J. Wei, P. Hing and Z.Q. Mo, Wear 225–229,1141 (1999).
(Wienss et al., 2000) A. Wienss, G. Persch-Schuy, R.Hartmann, P. Joeris, J.V ac. Sci.T echnol. A 18 , 2023 (2000).
(Wolfgang, 1999) F.E. Wolfgang S. “Manual de la técnica del automóvil”, Ed. Reverte, 3 pg. 224 (1999)
(Wu et al., 1997) D.Wu, D.Fu, H.Guo, Z.Zang, X. Meng, X. Fan, Phys. Rev. B 56 4949 (1997).
(Yaoa et al., 2005) S.H. Yaoa,*, Y.L. Sub, W.H. Kaoc, T.H. Liub, Tribology and oxidation behavior of TiN/AlN nano - multilayer films Taiwan, Tribology International xx 1–10 (2005).
174
Phys. Lett. 68, 2639 (1996).
(Zhang et al., 2003) Jia-Tao Zhang, Chuan-Bao Cao, Qiang LV, Chao Li, He-Sun Zhu, J. Mater. Science 38 (2003) 2559-2562 (Zykova et al., 2007) Zykova-Timan, T., Ceresoli, D. & Tosatti, E. Peak
effect versus skating in hightemperature nanofriction. Nature Mater. 6, 230–234 (2007).
175
LOGROS
OBTENIDOS
El presente trabajo de tesis de maestría se centro en la síntesis y caracterización de recubrimientos bajo ciertas condiciones de deposición los cuales a ser analizados por un conjunto de técnicas de caracterización que nos proporcionarían resultados que había que interpretar aunado a esto la aplicación de un biolubricante se sumaría un gran reto de estudio por un lado los recubrimientos duros y el biolubricante de forma individual y por otra parte como un sistema en conjunto lo cual significó implementar conocimientos de diversas áreas como materiales avanzados, ingeniería mecánica, ingeniería química y bioquímica entre otras, lo cual demuestra que no solo se necesita de un área de estudio sino el trabajo conjunto de diversos campos de conocimiento y la experiencia generada de ellos.
176