ABSTRACT
In Additive Manufacturing (AM) and 3D Printing Technologies, the part to be produced is first modeled in a computerized environment. Manufacturing data is prepared for AM machines / 3D printers by pre-processing (repair, slicing, etc.) the model which is obtained by design or different methods via software. One of the most important processes while preparing manufacturing data is "Slicing". It’s called as “slicing” when obtaining the cross-sectional areas in the intersection of 3D models with the plane at certain interval. According to these obtained areas, the manufacturing process is performed by the manufacturing machine and thus it produces parts in layers. The most important effects of the slicing method on the part produced are dimensional accuracy and surface roughness. In this study, it’s aimed to investigate slicing methods and the effects of these methods on the parts to be produced. Various slicing methods have been investigated and the applicability of slicing methods on different additive manufacturing techniques and possible effects of these methods on the part to be produced have been discussed.
Keywords: Additive Manufacturing, 3D printing, 3D model, slicing KAYNAKLAR
[1].Bircan, DA. Development of a Nurbs Based Adaptive Slicing Procedure For Fused Deposition Modeling In Rapid Prototyping Applications. Ph.D. Thesis. Adana. 2008. [2].Stratasys Ltd., 1989. http://www.stratasys.com Erişim Tarihi Ekim 10, 2014.
89
[3].3DSystems, 1986. http://www.3dsystems.com Erişim Tarihi Eylül 9, 2014. [4].Kai, CC, Jacob, GGK., Mei, T. Interface Between CAD and Rapid Prototyping Systems Part 1: A Study of Existing Interfaces. International Journal of Advanced Manufacturing Technology. 1997;13;566-570.
[5].Zhang, LC, Han, M, Huang, SH. CS File – An Improved Interface Between CAD and Rapid Prototyping Systems. Int. J. Adv. Manuf. Technol. 2003;21:15-19. [6].Özuğur, B. Hızlı Prototipleme Teknikleri İle Kompleks Yapıdaki Parçaların Üretilebilirliklerinin Araştırılması. Ankara. 2006. http://lib.gazi.edu.tr/.
[7].Habib, MA, Khoda, B. Hierarchical Scanning Data Structure for Additive Manufacturing. Procedia Manufacturing. 2017;10:1043-1053.
[8].Ito, Y, Nakahashi, K, Surface Triangulation For Polygonal Models Based On CAD Data. International Journal For Numerical Methods In Fluids. Int. J. Numer. Meth. Fluids 2002;39:75-96.
[9].Yarkınoğlu, O. Computer Aided Manufacturing (CAM) Data Generation For Solid Freeform Fabrication. Master Thesis. Ankara. 2007.
[10].Matusik, W., Bickel, B., Umetani, N. 2015. http://computational- fabrication.com/Matusik_Part1.pdf Accessed March 6, 2018.
[11].Pandey, PM, Reddy, NV, Dhande, SG. Slicing Procedures in Layered Manufacturing: A Review. Rapid Prototyping Journal. 2003a;9(5):274-288. [12].Jin, G. Adaptive process planning of rapid prototyping and manufacturing for complex biomedical models. Unpublished Thesis. 2012. Coventry.
https://core.ac.uk/download/pdf/30617904.pdf
[13].Koç, B. Visualized CAD Modeling And Layered Manufacturing Modeling For Components Made of a Multiphase Perfect Material, PhD Thesis.
[14].Kulkarni, P, Dutta, D. An Accurate Slicing Procedure For Layered Manufacturing. Compufer-Aided Design. 1996;28(9):683-697.
[15].Liao, YS, Chiu, YY. A New Slicing Procedure for Rapid Prototyping Systems. Int. J. Adv. Manuf. Technol. 2001;18:579-585.
[16].Dolenc, A., Makela, I. Slicing Procedures For Layered Manufacturing Techniques. Computer‐Aided Design. 1994: 26(2);119‐126.
[17].Tyberg J, Bohn JH. Local adaptive slicing. Rapid Prototyping Journal. 1998;4(3):118-127.
[18].Ma, W, He, P. An Adaptive Slicing and Selective Hatching Strategy for Layered Manufacturing. Journal of Materials Processing Technology. 1999;89-90:191-197. [19].Mani, K, Kulkarni, P, Dutta, D. Region-based Adaptive Slicing. Computer-Aided Design.1999;(31):317-333.
[20].Zhou, MY, Xi, JT, Yan, JQ. Adaptive Direct Slicing With Non-Uniform Cusp Heights For Rapid Prototyping. Int. J. Adv. Manuf. Technol. 2004;(23):20-27. 11 [21].Zhu, WM, Yu, KM. Dexel-Based Direct Slicing of Multi-Material Assemblies. Int. J. Adv. Manuf. Technol. 2001;(18);285-302.
[22].Vatani, M, Rahimi, AR, Brazandeh, F, Sanati, NA. An Enhanced Slicing Algorithm Using Nearest Distance Analysis for Layer Manufacturing. PWASET. 2009;37:721-726.
[23].Sabourin, E, Houser, SA, Bohn, JH. Adaptive Slicing Using Stepwise Uniform Refinement. Rapid Prototyping Journal. 1996;2(4):20.
[24].Sabourin, E, Houser, SA, Bohn, JH. Accurate Exterior, Fast Interior Layered Manufacturing. Rapid Prototyping Journal. 1997;3(2):44.
[25].Tata, K, Fadel, G, Bagchi, A, Aziz, N. Efficient slicing for layered manufacturing. Rapid Prototyping Journal. 1998;4:151-167.
90
[26].Pandey, PM, Reddy, NV, Dhande, SG. Improvement of surface finish by staircase machining in fused deposition modelling, Journal of Material Processing Technology. 2003b;132(1):323-31.
[27].Hildebrand, K, Bickel, B, Alexa, M. Orthogonal slicing for additive manufacturing. Computers & Graphics. 2013;37:669-675.
[28].Ding, D, Pann, Z, Cuiuri, D, Li, H, Larkin, N, Van Duin, S. Automatic multi- direction slicing algorithms for wire based additive manufacturing. Robotics and Computer-Integrated Manufacturing. 2016; 37:139-150.
[29].Barari, A. Profile Tolerance Allocation for Rapid Prototyping of Sculptured Surfaces in a Direct Slicing Process. ASME IDETC 2012. 2012:469-474.
[30].Jamieson, R, Hacker, H. Direct Slicing of CAD Models for Rapid Prototyping. Rapid Prototyping Journal. 1995;1(2):4-12.
[31].Zhao, Z, Laperriere, L. Adaptive Direct Slicing of the Solid Model for Rapid Prototyping. International Journal of Production Research.2000;38(1):69-83. [32].Hope, RL, Jacobs, PA, Roth, RN. Rapid Prototyping with Sloping Surfaces. Rapid Prototyping Journal. 1997;3(1):12.
[33].Hope, RL, Roth, RN, Jacobs, PA. Adaptive Slicing with Sloping Layer Surfaces. Rapid Prototyping Journal. 1997;3(3):89.
[34].Chen, X, Wang, C, Ye, X, Xiao, Y, Huang, S. Direct Slicing from Powershape Models for Rapid Prototyping. The International Journal of Advanced Manufacturing Technology. 2001;17(7):543-547.
[35].Sun, S, Chiang, H, Lee, M. Adaptive Direct Slicing of a Commercial Cad Model for Use in Rapid Prototyping. International Journal of Advanced Manufacturing Technology. 2007;34(7/8);689-701.
[36].Sikder, S., Barari, A., and Kishawy, A., 2013, "Adaptive Slicing Approach to Control Surface Error Factor in Rapid Prototyping Process," eds., University of Bergamo, Bergamo, Italy, pp.
[37].Sikder, S., Barari, A., and Kishawy, A., 2013, "Control of Nurbs-Based Surface Error Factor Using a Manufacturing Cost Optimization in Rapid Prototyping Process," eds., SaintPetersburg, Russia, pp.
[38].Sikder, S, Barari, A, Kishawy, HA. Effect Of Adaptive Slicing On Surface Integrity In Additive Manufacturing. International Design Engineering Technical Conferences&Computers and Information in Engineering Conference. 2014: 1- 10.USA. 12
[39].Sikder, S, Barari, A, Kishawy, HA. Global adaptive slicing of NURBS based sculptured surface for minimum texture error in rapid prototyping. Rapid Prototyping Journal. 2015;21(6):649-661
[40].Chang, CC. Direct slicing and G-code contour for rapid prototyping machine of UV resin spray using PowerSOLUTION macro commands. Int J Adv Manuf Technol. 2004;23:358-365.
[41].Bauer, T, Dawson, K, Spierings, AB, Wegener, K. Microstructure and mechanical characterisation of SLM processed Haynes® 230®. Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium. 2015:813-822.
91 Ref_Num: 9
ENDÜSTRİ 4.0 DEVRİMİ, TÜRKİYE’DE VE GELİŞMEKTE OLAN