Esta técnica se ha utilizado para la determinación cuantitativa de Pt y Co en los electrodos preparados sobre capa difusora de gases destinados a su ensayo en monocelda.
La espectroscopía de emisión óptica de plasma acoplado inductivamente (ICP-AES) se basa en la vaporización, disociación, ionización y excitación de los diferentes elementos químicos de una muestra en el interior de un plasma [38].
Durante el proceso de desexcitación de los átomos neutros e iones en el interior de un plasma se producen las emisiones de radiación electromagnética en la zona del UV-visible. Estas radiaciones, características de cada elemento, se separan en función de su longitud de onda y finalmente se mide su intensidad. La selección de la longitud de onda permite determinar el metal cualitativamente, mientras que la intensidad de la radiación emitida proporciona la información para su cuantificación.
Para la medición en electrodos de Pt y Pt-Co electrodepositados se procede a la disolución de los mismos con HNO3 y/o agua regia.
Referencias bibliográficas
1 WOODS. R. Chemisorption at Electrodes, Journal of Electroanalytical Chemistry. 9,1974, pp: 27- 42.
2 Real Surface Area Measurements in Electrochemistry, documento de la IUPAC, TRASATTI , S., PETRII, O.A., (Editores), publicado en el Journal of Electroanalytical Chemistry, 332, 1992, pp:353- 376
3 ADZIC, R., Recent advances in the kinetics of oxygen reduction, en Electrocatalysis, Lipkowski, J., Ross, P. (Editores), Wiley-VCH, 1998, pp: 197.
4 ROSS, P., Hydrogen adsorption at metal surfaces
,
en Electrocatalysis, Lipkowski, J., Ross, P. (Editores), Wiley-VCH, 1998, pp: 27.5 MARKOVIC, N.M., GASTEIGER, H.A. AND ROSS JR., P.N., Oxygen Reduction on Platinum Low- Index Single-Crystal Surfaces in Sulfuric Acid Solution: Rotating Ring - Pt(hkl) Disk Studies', Journal
of Physical Chemistry, 99, 1995, pp:3411-3425
6 VIELSTICH. W., Handbook of Fuel Cells- Fundamentals, Technology and Applications, Vol 2, Wiley, Chichester, Reino Unido, 2003, pp:153-161
7 BARD A.J., FAULKNER. L., Electrochemical Methods, J.Wiley&Sons, Nueva York, 1980. 8 BAGOTSKY, V.S. AND VASSILYEV, Y.B., Mechanism of Electro-Oxidation of Methanol on the Platinum Electrode, Electrochimica Acta, 1967, 12, pp:1323-1340
9 PAULUS, U.A., VEZIRIDIS, Z., SCHNYDER, B., KUHNKE, M., SCHERER, G.G., WOKAUN, A.,
Fundamental investigation of catalyst utilization at the electrode/solid polymer electrolyte
interface: Part I. Development of a model system, Journal of Electroanalytical. Chemistry, 541,
2003, pp: 77-91
10 KANGASNIEMI, K.H., CONDIT, D.A., JARVI, T.D. Characterization of Vulcan Electrochemically Oxidized under Simulated PEM Fuel Cell Conditions. Journal of the Electrochemical Society, 151 (4) ,2004, pp: E125-E132
11PLESKOV, Y.V, FILINOVSKII, V.Y., The Rotating Disc Electrode, 1ª Edición, Consultants Bureau, Nueva York, 1976
12 BUCK ,N., RICHARD P, Piezoelectric chemical (IUPAC Technical Report), Pure and Applied.
Chemistry., Vol. 76, No. 6, 2004, pp. 1139–1160
13 KANAZAWA, K.K., GORDON J. G., Frequency of a Quartz Microbalance in contact with Liquid,
Analytical. Chemistry., 175, 1985, pp: 99-105
14SAUERBREY G., Verwendung von Schwingquarzen zur Wägung dünner Schichten und zur Mikrowägung Zeitschrift für Physik., 155, 1959, pp: 206-213
15 LU C, LEWIS, O., Investigation of film-thickness determination by oscillating quartz resonators with large mass load, Journal of Applied Physics, 43, 1972, pp:4385-4410.
16 GILEADI, E. TSIONSKY, V.Studies of Electroplating using an EQCM. Copper and silver on gold.
Journal of the Electrochemical Society 147 (2), 2000, pp: 567-574
17 STALNIONIS, G., TAMASAUSKAITE-TAMASIUUNAITE, L., PAUTIENIENE, V., JUYS. Z. CO electrooxidation on a polycrystalline Pt electrode: a wall jet EQCM study. Journal of Electroanalytical
chemistry 590, 2006, pp:198-206
18 JEFFREY, C. A. ,STORE, W.M. , HARRIGNTON. D.A. . Electrochemical quartz-crsytal microbalance study of silver and copper electrodeposition on base and iodine-covered platinum electrodes. Journal of Electroanalytical Chemistry, 569, 2004, pp: 61-70
19 GIMENEZ, D., GARCÍA-JAREÑO, J.J. , VICENTE. F. Materiales y Procesos Electródicos (I), 2002, pp:65-84 .
20 CHAPARRO, A.M., MUELLER, N., ATIENZA, C., DAZA, L., Study of electrochemical instabilities of PEMFC electrodes in aqueous solution by means of membrane inlet mass spectrometry, Journal
of Electroanalytical Chemistry, 591, 2006, pp: 69-73
21 FLOATE, S. HYDE, M., COMPTON, R.G.,Electrochemical and AFM studies of the
electrodeposition of cobalt on glassy carbon: an analysis of the effect of ultrasound, Journal of
Electroanalytical Chemistry 523, 2002, pp:49–63
22 BARRERA, E., L PALOMAR M., BATINA, N., GONZÁLEZ.I., Formation Mechanisms and Characterization of Black and White Cobalt Electrodeposition onto Stainless Steel. Journal of The
Electrochemical Society, 147, 2000, pp: 1787-1796.
23 Cobalt monography. Brussels, Belgium, Centre d´information du cobalt, 1960:
24 YOUNG, M., ROLAND, S. Cobalt: its Chemistry, Metallurgy, and Uses. Nueva York, Reinhold Publishing Corporation, 1960.
25 MOTOYAMA M., FUKUNAKA, Y., SAKKA, T., OGATA. Y. H., Effect of Surface pH on
Electrodeposited Ni Films. Journal of The Electrochemical Society, 153 (7), 2006, pp: C502-C508. 26 MALLET, J.J., SVEDBERG, E.B., SAYAN, S., SHAPIRO, A.J., WILUNSKI, L., MADEY, T.E., CHEN, P.J., EGELHOFF, W.F., MOFFAT, T.P., Compositional control in electrodeposited CoxPt1-x films, Electrochemical and Solid State Letters, 8, (1), 2005, pp: C15-C18
27 UHLEMANN, M. KRAUSE, A. GEBERT. A. Effect of a Magnetic Field on the Local pH Value in front of the Electrode Surface during Electrodeposition of Co,Journal of Electroanalytical Chemistry 57, 2005, pp:19–24
28 PATTANAIK, G. ZANGARI, G.,Morphology and Magnetic Properties of Co-rich Co-Pt Thin Films Electrodeposited on Cr Seed Layers. Journal of the Electrochemical Society, 153 (1), 2006, pp :C6- C10
29 WANG, F., HOSOIRI, K.,. DOI, S., OKAMOTO, N., KUZUSHIMA, T., TOTSUKA, T., WATANABE. T. Nanostructures L1o Co-Pt thin films by an electrodeposition process.
Electrochemistry Communications 6, 2004, pp:1149-1152.
30. CHAPARRO A.M., GALLARDO, B., FOLGADO, M.A., MARTIN A.J., DAZA L. PEMFC electrode preparation by electrospray: Optimization of catalyst load and ionomer content, Catalysis Today 14,2009,pp:237–241
31 Günther Scherer, Paul Scherrer Institut, Suiza. Comunicación personal.
32 KOCHA, S.S. HandBook of Fuel Cells: Fundamentals, Technology and Applications. VIELSTICH, W., GASTEIGER, H. A., LAMM, A. (Editores). Vol 3, John Wiley & Sons, 2003.
33 EIKERLING, M., KORNYSHEV, A.A. Modelling the performance of the cathode catalyst layer of polymer electrolyte fuel cells, Journal of Electroanalytical Chemistry, 453, 1998, pp: 89-106 34 NEYERLIN, K.C., GU, W., JORNE, J., CLARK, A., GASTEIGER, H.A., Cathode Catalyst Utilization for the ORR in a PEMFC. Anlaytical Model and Experimental Validation. Journal of The
Electrochemical Society, 154, Vol 2, 2007, pp: B279-B287
35 THOMPSETT, D., HandBook of Fuel Cells: Fundamentals, Technology and Applications. VIELSTICH, W., GASTEIGER, H. A., LAMM, A. (Editores). Vol 2. John Wiley & Sons, 2003. pp:538- 565
36 ROSS JR. P.N., HandBook of Fuel Cells: Fundamentals, Technology and Applications.
VIELSTICH, W., GASTEIGER, H. A., LAMM, A. (Editores). Vol 2. John Wiley & Sons, 2003. pp: 465- 481
37 LASIA, A., HandBook of Fuel Cells: Fundamentals, Technology and Applications. VIELSTICH, W., GASTEIGER, H. A., LAMM, A. (Editores). Vol 2. John Wiley & Sons, 2003. pp: 416-440 38 Técnicas de análisis y caracterización de materiales. FARALDOS M.Y GOBERNA C. (Editores). Consejo Superior de Investigaciones Científicas, Madrid, 2002.
3 Resultados
En el capítulo de Resultados se describen los principales datos obtenidos de los experimentos durante la fase experimental de la tesis. Se ha dividido en tres grandes apartados, 3.1, 3.2 y 3.3. El apartado 3.1 recoge los principales resultados obtenidos en el estudio de los aspectos básicos del electrodepósito de Co, Pt y Pt-Co sobre los distintos sustratos analizados y en diversas condiciones experimentales. De estos resultados se extrajeron condiciones experimentales adecuadas para la preparación de electrodos sobre tela difusora de gases, proceso descrito en 3.2. Por último, en el apartado 3.3 se recogen los experimentos llevados a cabo en monocelda como ensayo del funcionamiento de dichos electrodos.