Display

SHOW GRID LINES. Displays a grid on the Main Display as a series of lines.

Refer to View > Display Options > View Properties tab; Window Options group box (section 10.2.2).

SHOW GRID POINTS. Displays a grid on the Main Display as a series of dots.

Refer to View > Display Options > View Properties tab; Window Options group box (section 10.2.2).

CYME 5.02 – Reference Manual

DISPLAY MULTIPLE SELECTION HANDLES. Displays a rectangle around a multiple selection, group or region selection with corner and side handles allowing to resize the selection as a whole or to rotate the group. You may activate this function before or after making your selections.

DISPLAYS PHASE DIRECTION. Displays arrows on the sections to illustrate the phases and their directions.

DISPLAYS SINGLE-PHASE SECTIONS. Click on this button to display or hide all single-phase sections.

DISPLAYS TWO-PHASE SECTIONS. Click on this button to display or hide all two-phase sections.

DISPLAYS THREE-PHASE SECTIONS. Click on this button to display or hide all three-phase sections.

DISPLAYS REAL POWER FLOW DIRECTION. Displays an arrow at the end of the section indicating the direction of the real power flow.

The color of the arrow can be changed. Go to View > Display Options and click on the Modify button in the Symbols group box. (see 10.1.1). Go to the Network Symbols tree list item and select the Flow Direction option applicable. Change the parameters in the right hand part of the dialog box.

DISPLAYS REACTIVE POWER FLOW DIRECTION. Displays an arrow at the end of the section indicating the direction of the reactive power flow.

The color of the arrow can be changed just as for the real power flow direction arrow. See above.

HIGHLIGHTS THE CIRCUIT PATH UPSTREAM OF THE SELECTED SECTION. Select a section; then click on the button to highlight the upstream part of the network up to the first open point, or up to the source if there are no open points. The laterals are not highlighted.

HIGHLIGHTS THE CIRCUIT PATH DOWNSTREAM OF THE SELECTED SECTION. Select a section; then click on the button to highlight the downstream part of the network down to the first open point, or to the end of the network if there are no open points. All laterals are highlighted as well.

DISPLAY ALL PROTECTION INSTRUMENTS. To display/hide the symbols of the instruments attached to a protection device. The command to add instruments in included in the section or the node contextual menus (see 3.2.4 Section and Nodes Contextual Menus).

REARRANGE ALL NETWORKS IN VIEW. Rearranges all the networks displayed orthogonally. The menu command Edit > Rearrange One-Line Diagram (see 5.22) rearranges the network(s) downstream of the point clicked on only. To revert to the geographical display, use the Edit > Undo Modification menu command (see 5.1) or the Undo Modif button located in the Main toolbar (see 2.5.1).

SHOW ALL CONNECTIONS. A breakpoint is a drawing element that allows hiding the section portion downstream of the breakpoint. A breakpoint is installed using the corresponding command in the Section and Nodes Contextual Menus (see 3.2.4). A tag is displayed at the breakpoint indicating it. To display the complete section, click the Show All Connection button.

DISPLAY BEST FIT. Will resize all drawing elements (line width, font size, symbol size) in relation to one another. The corresponding drawing settings found in the Display Options dialog box are changed (see the General Options at the View Properties tab (chapter 10.2.1) for more information about this).

Note: The changes made to the display cannot be undone using the Undo Modif command.

Note: You can set the program to perform this action automatically upon opening a view. See the General Options of the View Properties tab of the Display Options dialog box as well (chapter 10.2.1).

CYME 5.02 – Reference Manual

SELECT DEVICE VIEW. To select a filtered view and apply it to the display.

Upon selecting one of the configurations proposed, CYME displays the simplified view as a new tab in the main display screen. To create filters to display only the types of equipment, lines and loads wanted, select the Customize option in the drop-down list. Keyword filters can be utilized. The filters are created using the Customize > Simplified View dialog box (see 11.11) that is also displayed when selecting the Customize option proposed when clicking this icon. Various views can be created and saved to be accessed later on using the drop-down list of this button.

You can display as many simplified views as desired. Before selecting a new simplified view to display, enable the main one-line display by clicking on its tab.

SHOW OVERVIEW MAP. Opens the Overview Map thumbnail view on the OLD display. See 9.12 Overview Map.

BACKGROUND MAP. Activates the Background Map Tab of the Multi-Explorer pane (see 2.3.8) of the software to select and display a map in the background of the one-line display. Equivalent menu command: View >

Background Map (see 9.11).

DISPLAY OPTIONS. Opens the Display Options dialog box (see Chapter 10).