06/19974979 DC
BS 7371-7 Coatings on metal fasteners. Part 7. Specification for mechanically applied zinc and zinc based coatings
FME/9/1 Comments for the above document
are required by 1 December, 2006
06/19977467 DC
BS IEC 62303 Radiation protection instrumentation. Equipment for monitoring airborne tritium
NCE/2
06/19981867 DC
BS ISO 16872 Short link chain for lifting purposes. Grade VH, fine tolerance for manually operated chain hoists
MHE/1 Comments for the above document
are required by 31 January, 2007
06/19981869 DC
BS ISO 16877 Short link chain for lifting purposes. Grade TH, fine tolerance for manually operated chain hoists
MHE/1 Comments for the above document
are required by 31 January, 2007
06/30061348 DC
ISO 13473-4 Characteristics of pavement texture by using surface profiles. Part 4. Spectral analysis of texture profiles
EH/1/2
06/30105081 DC BS ISO 6709 Standard
representation of geographic point location by coordinates
IST/36
06/30117321 DC
ISO 5660-4 Reaction-to-fire tests.
Heat release, smoke production and mass loss rate. Part 4.
Measurement of heat release for determination of low levels of combustibility
FSH/21
Page 35 of 64 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30122245 DC
EN 980 Symbols for use in the labelling of medical devices
CH/210/3 Comments for the above document
are required by 10 November, 2006
06/30123163 DC
BS EN 1041 Information supplied by the manufacturer with medical devices
CH/210/3 Comments for the above document
are required by 30 November, 2006
06/30125909 DC
ISO 13628-4 Petroleum and natural gas industries. Design and operation of subsea production systems. Part 4. Subsea wellhead and tree equipment
£33.00 members, £66.00 non-members
PSE/17/-/4 Comments for the above document
are required by 31 January, 2007
06/30127203 DC ISO 15138 Petroleum, petrochemical and natural gas industries. Offshore production installations. Heating, ventilation and air conditioning
£18.00 members, £36.00 non-members
PSE/17/-/6 Comments for the above document
are required by 31 January, 2007
06/30128772 DC
ISO 16889 Hydraulic fluid power filters. Multi-pass method for filtration performance of a filter element
MCE/18/-/6 Comments for the above document
are required by 31 January, 2007
06/30130866 DC EN ISO 14175 Welding
consumables. Shielding gases for fusion welding and allied processes
WEE/39 Comments for the above document
are required by 31 January, 2007
06/30131928 DC ISO 22263 Organization of information about construction works. Framework for project management
B/500
06/30133094 DC
BS 7273-4 Code of practice for the operation of fire protection measures. Part 4. Actuation of release mechanisms for doors
FSH/12/4
06/30135904 DC
ISO 21094 Optics and photonics.
Telescopic systems. Specifications for night vision devices
CPW/172 Comments for the above document
are required by 19 January, 2007
06/30137125 DC
ISO 15011-3 Health and safety in welding and allied processes.
Laboratory method for sampling fume and gases. Part 3.
Determination of ozone emission rate
WEE/40
06/30137133 DC ISO 11992-2 AMD 1 Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles. Part 2. Application layer for brakes and running gear
AUE/16 Comments for the above document
are required by 31 January, 2007
06/30137914 DC BS 7533-7/A1 Pavements constructed with clay, natural stone, or concrete pavers. Part 7.
Code of practice for the construction of pavements of natural stone setts and cobbles
B/507 Comments for the above document
are required by 31 December, 2006
06/30137917 DC BS 7533-10/A1 Pavements constructed with clay, natural stone, or concrete pavers. Part 10.
Guide for the structural design of trafficked pavements constructed of natural stone setts
B/507 Comments for the above document
are required by 31 December, 2006
06/30137993 DC
IEC 62442-1 Lamp controlgear.
Part 1. Ballasts for fluorescent lamps. Method of measurement to determine energy consumption
CPL/34/3 Comments for the above document
are required by 31 January, 2007
06/30138106 DC
ISO 10110-7 Optics and photonics.
Preparation of drawings for optical elements and systems. Part 7.
Surface imperfection tolerances
CPW/172/1 Comments for the above document
are required by 19 January, 2007
06/30138608 DC
IEC 60601-2-56 Medical electrical equipment. Part 2-56. Particular requirements for basic safety and essential performance of screening thermographs for human febrile temperature screening
CH/62/4 Comments for the above document
are required by 30 November, 2006
Page 36 of 64 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30140009 DC
EN 12543-2 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing.
Part 2. Pinhole camera radiographic method
WEE/46
06/30140028 DC
EN 50136-1-5 Alarm systems.
Alarm transmission systems and equipment. Part 1-5. Requirements for packet switched network PSN
GW/1/11
06/30140276 DC
EN 473 Non-destructive testing.
Qualification and certification of NDT personnel. General principles
WEE/46
06/30140677 DC IEC TS 61994-4-3 ED.1
Piezoelectric and dielectric devices for frequency control and selection.
Glossary. Part 4-3. Materials for dielectric devices
EPL/49 Comments for the above document
are required by 17 November, 2006
06/30140710 DC
BS EN ISO 21549-6 Health informatics. Patient healthcard data. Part 6. Administrative data
IST/35 Comments for the above document
are required by 19 January, 2007
06/30143300 DC
ISO 730 Agricultural wheeled tractors. Rear-mounted three-point linkage. Categories 1N, 1, 2, 3N, 3, 4N and 4
AGE/6
06/30143303 DC
ISO 2332 Agricultural tractors and machinery. Connection of implements via three-point linkage.
Clearance zone around implement
AGE/6
06/30143306 DC
ISO 11001-3 Agricultural wheeled tractors and implements.
Three-point hitch couplers. Part 3.
Link coupler
AGE/6
06/30143942 DC BS ISO 6016 Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
B/513/1
06/30144796 DC
ISO 26243 Cards for cotton spinning. Vocabulary and principles of construction
TCI/33 Comments for the above document
are required by 19 January, 2007
06/30145182 DC
ISO 5415 Reduction sleeves with 7/24 external and morse internal taper and incorporated screws
MTE/5
06/30145675 DC
ISO 12301 Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
MCE/12
06/30146125 DC EN 12115 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
PRI/66 Comments for the above document
are required by 31 January, 2007
06/30146370 DC
ISO 15439-1 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 4 bar.
Polyamide (PA). Part 1. General
PRI/88/2
06/30146373 DC
ISO 22621-3 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 20 bar. Polyamide (PA). Part 3.
Fittings
PRI/88/2
06/30146376 DC
ISO 15439-2 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 4 bar.
Polyamide (PA). Part 2. Pipes
PRI/88/2
06/30146379 DC
ISO 15439-3 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 4 bar.
Polyamide (PA). Part 3. Fittings
PRI/88/2
06/30147232 DC
IEC 60601-1-10 Medical electrical equipment. Part 1-10. General requirements for basic safety and essential performance. Collateral standard. Requirements for the development of physiologic closed-loop controllers
CH/62/1 Comments for the above document
are required by 31 January, 2007
06/30148173 DC ISO 9809-1 Gas cylinders.
Refillable seamless steel gas cylinders. Design, construction and testing. Part 1. Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
PVE/3/3
Page 37 of 64 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30148176 DC ISO 9809-2 Gas cylinders.
Refillable seamless steel gas cylinders. Design, construction and testing. Part 2. Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
PVE/3/3
06/30148179 DC ISO 9809-3 Gas cylinders.
Refillable seamless steel gas cylinders. Design, construction and testing. Part 3. Normalized steel cylinders
PVE/3/3
06/30148641 DC
IEC 60050-112 ED1 International electrotechnical vocabulary. Part 112. Quantities and units
GEL/1 Comments for the above document
are required by 17 November, 2006
06/30149088 DC
ISO 5630-6 Paper and board.
Accelerated ageing. Part 6.
Exposure to atmospheric pollution
PAI/11
06/30149145 DC
IEC 60384-1 Fixed capacitors for use in electronic equipment. Part 1.
Generic specification
EPL/40X Comments for the above document
are required by 31 January, 2007
06/30149441 DC
ISO 8362-5 Injection containers and accessories. Part 5. Freeze drying closures for injection vials
CH/212
06/30150526 DC
BS EN 61023/prA1 Maritime navigation and
radiocommunication equipment and systems. Marine speed and distance measuring equipment (SDME). Performance
requirements. Methods of testing and required test results
EPL/80
06/30150530 DC
BS EN 61097-1/prA1 Global maritime distress and safety system (GMDSS). Part 1. Radar transponder. Marine search and rescue (SART). Operational and performance requirements, methods of testing and required test results
EPL/80
06/30151914 DC BS ISO 21244 Agricultural equipment. Mechanical connections between towed and towing vehicles. Implement ring hitches and attachment to tractor drawbars
AGE/6
06/30152150 DC
BS 476-3 AMD 2 Fire tests on building materials and structures.
Classification and method of test for external fire exposure to roofs
FSH/22/8 Comments for the above document
are required by 6 December, 2006
06/30152270 DC
BS EN 14255-3 Measurement and assessment of personal exposures to incoherent optical radiation. Part 3. UV-Radiation emitted by the sun
CPL/34/10
06/30153256 DC BS EN 14079-2 Non-active medical devices. Properties for compresses and wound packing products for medical use. Part 2.
Test methods for absorbent cotton gauze and absorbent cotton and viscose gauze
CH/205/1
06/30153965 DC
BS ISO/IEC 28630 Information technology. Determination of chemical emission rates from electronic equipment
IST/3 Comments for the above document
are required by 30 November, 2006
06/30154871 DC BS ISO 4254-8 Agricultural machinery. Safety. Part 8. Solid fertilizer distributors
AGE/32
06/30154874 DC BS ISO 4254-9 Agricultural machinery. Safety. Part 9. Seed drills
AGE/32
06/30155388 DC BS 2A 241 AMD 1 General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180 000 lbf/in$u2) or greater. Specification
ACE/12 Comments for the above document
are required by 6 December, 2006
06/30155753 DC
BS ISO 1750 Pesticides and other agrochemicals. Common names
AW/81
06/30155776 DC
BS EN 197-4/prA1 Cement. Part 4.
Composition, specifications and conformity criteria for low early strength blast furnace cements
B/516/12 Comments for the above document
are required by 15 December, 2006
Page 38 of 64 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30155782 DC
BS EN 1170-8 Test method for glass-fibre reinforced cement. Part 8. Cyclic weathering type test
B/524 Comments for the above document
are required by 15 December, 2006
06/30155785 DC
BS EN 15564 Precast concrete products. Resin bound concrete.
Requirements and test methods
B/524 Comments for the above document
are required by 15 December, 2006
06/30155788 DC BS EN 13297 Textile floor coverings. Classification of needled pile floor coverings
PRI/3
06/30155798 DC
BS EN 62046 Safety of machinery.
Application of protective equipment to detect the presence of persons
£18.00 members, £36.00 non-members
GEL/44
06/30155802 DC
BS EN 13999-2 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Part 2. Determination of volatile organic compounds
PRI/52
06/30155805 DC
BS EN 13999-3 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Part 3. Determination of volatile aldehydes
PRI/52
06/30155808 DC
BS EN 13999-4 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Part 4. Determination of volatile diisocyanates
PRI/52
06/30155852 DC
BS EN 60286-3-VI Packaging of components for automatic handling. Part 3. Type VI.
Packaging of surface mount components on blister carrier tapes 4 mm in width
EPL/40 Comments for the above document
are required by 17 November, 2006
06/30155866 DC
BS EN 62451 HSSDC-2 shielded connectors
EPL/48 Comments for the above document
are required by 17 November, 2006
06/30155872 DC IEC/TS 62452 Testing and performance requirements for high speed serial and parallel-serial copper links
EPL/48 Comments for the above document
are required by 17 November, 2006
06/30155905 DC BS EN 140401-803 Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05. 0,1. 0,25. 0,5. 1. 2
EPL/40X
06/30155911 DC BS EN 140401-801 Detail specification. Fixed low power film SMD resistors. Rectangular.
Stability classes 0,1. 0,25. 0,5. 1
EPL/40X
06/30155919 DC
BS EN 3745-514 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 514. Cable twist bend
ACE/6/-/10
06/30155922 DC BS EN 140100 Sectional specification. Fixed low power film resistors
EPL/40X
06/30155957 DC BS ISO 28004 Security management systems for the supply chain. Guidelines for the implementation of ISO/PAS 28000
SME/32
06/30155963 DC
BS ISO 10998 Agricultural tractors.
Requirements for steering
AGE/6
06/30156009 DC
BS EN 13921 Personal protective equipment. Ergonomic principles
PH/9/7
06/30156017 DC
BS EN 60432-3/prA2 Incandescent lamps. Safety specifications. Part 3. Tungsten-halogen lamps (non-vehicle)
CPL/34/1
06/30156083 DC
BS EN 62420 Concentric lay stranded overhead electrical conductors containing one or gap(s)
GEL/7 Comments for the above document
are required by 15 November, 2006
06/30156096 DC
ISO CEN TS 12977-3 Performance test methods. Thermal solar systems and components. Custom built systems. Part 3. Performance test methods for solar water heater stores
RHE/25
Page 39 of 64 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30156146 DC IEC/TS 62450 Technical specification for 40 pin SCA 2 connector with parallel selection
EPL/48 Comments for the above document
are required by 15 November, 2006
06/30156164 DC
BS EN 3375-008 Aerospace series. Electrical cables for signal data transmissions. Part 008.
Double screened, characteristic impedance 77 $0P3 $2I, operating temperatures -55$0DC to 260$0DC. Product standard
ACE/6/-/2
06/30156182 DC
BS EN 61753-022-2 Fibre optic interconnecting devices and passive components. Performance standard. Part 022-2. Fibre optic connectors terminated on multimode fibre for category C.
Controlled environment
GEL/86/2
06/30156187 DC
BS EN 61753-121-2 Fibre optic interconnecting devices and passive components. Terminated cable assemblies part. Part 121-2.
Performance standard for simplex and duplex cords with singlemode fibre optic cylindrical ferrule connectors for category C. Contro
GEL/86/2
06/30156191 DC
PD CLC/TR 50378-2-1 Passive components to be used in optical fibre communication systems.
Product specifications. Part 2-1.
SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 category B1.1 singlemode fibre
GEL/86/2
06/30156201 DC
BS EN 50411-2-3 Fibre organisers and closures to be used in optical fibre communication systems.
Product specifications. Part 2-3.
Sealed inline fibre splice closures type 1, for category S & A
GEL/86/2
06/30156204 DC BS EN 50378-3-1 Passive components to be used in optical fibre communication systems.
Product specifications. Part 3-1.
Type. 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
GEL/86/2
06/30156211 DC
BS EN 50377-10-1 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications.
Part 10-1. Type MU-PC Simplex terminated on IEC 60793-2-50 category B1.1 and B1.3
singlemode fibre, with full zirconia f
GEL/86/2
06/30156214 DC
BS EN 50377-8-9 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications.
Part 8-9. LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule
GEL/86/2
06/30156243 DC
BS EN 197-1/prA2 Cement. Part 1.
Composition, specifications and conformity criteria for common cements
B/516/6
06/30156305 DC BS EN 14079-1 Non-active medical devices. Properties for compresses and wound packing products for medical use. Part 1.
Test methods and requirements for absorbent cotton gauze and absorbent cotton and viscose gauzes used in the manufacturing of compresse
CH/205/1
06/30156314 DC
BS EN 13120 Internal blinds.
Performance requirements including safety
B/538/3
06/30156317 DC
BS EN 71-1/prA2 Safety of toys.
Part 1. Mechanical and physical properties
CW/15
06/30156348 DC
BS EN 15587 Cereals and cereal products. Determination of Besatz in wheat (Triticumaestivum L.), durum wheat (Triticum durum Desf.), rye (Secalecereale L.) and feed barley (Hordeum vulgare L.)
AW/4
06/30156351 DC
BS EN 15585 Cereals and cereal products. Durum wheat (T. durum Desf.). Determination of
percentage of mitadine grains and calculation of percentage of vitreous grains
AW/4
06/30156380 DC
BS ISO 1795 Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
PRI/50
06/30156407 DC
BS EN 15570-1 Hardware for furniture. Strength and durability of hinges and their components. Part 1. Hinges pivoting on a vertical axis
FW/1
Page 40 of 64 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30156414 DC
BS EN 60286-2 Packaging of components for automatic handling. Part 2. Tape packaging of components with unidirectional leads on continuous tapes
EPL/40X
06/30156418 DC
BS EN 60286-3-V Packaging of components for automatic handling. Part 3. Type V.
Packaging of surface mount components on continuous pressed carrier tapes
EPL/40X
06/30156434 DC
BS EN 62455 IP and transport stream based service access
£33.00 members, £66.00 non-members
EPL/100
06/30156472 DC
BS EN 60146-1-1 Semiconductor converters. General requirements and line commutated converters.
Part 1-1. Specification of basic requirements
£18.00 members, £36.00 non-members
PEL/22 Comments for the above document
are required by 15 December, 2006
06/30156491 DC
BS EN 15571 Machines and plants for mining and tooling of natural stones. Safety. Requirements for surface finishing machines
MCE/3/15
06/30156494 DC
BS EN 15572 Machines and plants for mining and tooling of natural stones. Safety. Requirements for edge finishing machines
MCE/3/15
06/30156499 DC
BS EN 15573 Earth-moving machinery. Requirements for use on the road
B/513/1
06/30156508 DC BS EN 15583-1 Winter maintenance equipment. Snow ploughs. Part 1. Product description and requirements
B/513
06/30156514 DC BS ISO 19433 Building construction machinery and equipment. Pedestrian-controlled vibratory plates. Terminology and commercial specifications
B/513
06/30156517 DC BS ISO 19452 Building construction machinery and equipment. Pedestrian-controlled vibratory (percussion) rammers.
Terminology and commercial specifications
B/513
06/30156520 DC
BS ISO 22197-1 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Removal of nitric oxide
RPI/13
06/30156550 DC
BS EN 13103 Railway applications.
Wheelsets and bogies.
Non-powered axles. Design guide
RAE/3/-/1 Comments for the above document
are required by 31 January, 2007
06/30156553 DC
BS EN 13104 Railway applications.
Wheelsets and bogies. Powered axles. Design method
RAE/3/-/1 Comments for the above document
are required by 31 January, 2007
06/30156589 DC
ISO 21268-4 Soil quality. Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials.
Part 4. Influence of pH on leaching with initial acid/base addition
EH/4 Comments for the above document
are required by 31 January, 2007
06/30156625 DC
BS EN ISO 105-B10 Textiles.
Tests for colour fastness. Part B10.
Artificial weathering. Exposure to filtered xenon. Arc radiation
TCI/81 Comments for the above document
are required by 31 January, 2007
06/30156696 DC
IEC 60384-11 Fixed capacitors for use in electronic equipment. Part 11. Sectional specification. Fixed polyethylene terephthalate film dielectric metal foil D.C. capacitors
EPL/40X Comments for the above document
are required by 12 December, 2006
06/30156699 DC
IEC 60384-11-1 Fixed capacitors for use in electronic equipment.
Part 11-1. Blank detail
specification. Fixed polyethylene terephthalate film dielectric metal foil D.C. capacitors. Assessment level E
EPL/40X Comments for the above document
are required by 12 December, 2006
06/30156742 DC
BS IEC 62440 Electric cables.
Guide to use for cables with a rated voltage not exceeding 450/750 V
GEL/20/17 Comments for the above document
are required by 31 January, 2007
Page 41 of 64 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30156777 DC BS ISO 13606-1 Health informatics. Electronic health record communication. Part 1.
Reference model
£18.00 members, £36.00 non-members
IST/35 Comments for the above document
are required by 31 January, 2007
06/30156789 DC
BS EN 15595 Railway applications.
Braking. Wheel slip prevention equipment
RAE/4 Comments for the above document
are required by 31 January, 2007
06/30156796 DC
BS EN 15594 Railway applications.
Track. Restoration of rails by electric arc welding
RAE/2 Comments for the above document
are required by 31 January, 2007
06/30156800 DC BS EN 14587-2 Railway applications. Track. Flash butt welding of rails. Part 21. New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant
RAE/2 Comments for the above document
are required by 31 January, 2007
06/30156812 DC BS EN 15593 Packaging.
Management of hygiene in the production of packaging for foodstuffs. Requirements
PKW/0 Comments for the above document
are required by 31 January, 2007
06/30156843 DC
BS EN 62442-2 Lamp controlgear.
Part 2. Ballasts for fluorescent lamps. Energy coding system
CPL/34/3 Comments for the above document
are required by 31 January, 2007
06/30156951 DC
BS ISO 5675 Agricultural tractors and machinery. General purpose quick-action hydraulic couplers
AGE/32 Comments for the above document
are required by 31 January, 2007
06/30156963 DC
BS EN 60092-201 Electrical installations in ships. Part 201.
System design. General
JPEL/18 Comments for the above document
are required by 31 January, 2007