UnDeRgROUnD TRUCkS
3500
3500
2210 2172
(W)
R4635
2000 x 45° Chamfered Corner R7490
3365 4210
3365 4210 2444
1848
14°
3086 1700
392
2920 1440
317 (C) 2362
(H2) 4438
(H1) 58°
left turning radius
• Turning radius left and right are symmetrical.
• Dimensions shown are based on standard vehicle configuration with 25 mm tyre deflection.
• All dimensions are shown in millimetres.
• For 18.00R25 tyres add 68 mm to all height dimensions and 139 mm to dimensions (w)
Dimensions and weights
• Approximate net weight MT2010 ... 20 500 kg
• Axle load, front end ... 13 800 kg
• Axle load, back end ... 6 700 kg Standard equipped vehicle with empty box
Turning angle +/-42.5°
Recommended drift size
UnDeRgROUnD TRUCkS
Minetruck MT431B
Features
• ROPS/FOPS canopy with back protection
• Jacobs engine brake provides increased brake life, automatic engine overspeed protection, and reduced heat from braking
• Electric transmission shift control for convenient shifting
• Converter lockup offers better power transfer, less heat and longer component life
• Centralized lubrication simplifies maintenance
• SAHR brake system offers long component life and very reliable braking
The Minetruck MT431B is a 28.1 metric ton capacity underground truck for large underground operations in mining and construction. The Atlas Copco MT431B is ready to deliver reliable productivity to your operation.
UnDeRgROUnD TRUCkS
Specifications
Minetruck MT431B Capacities, SAE regulations
Tramming capacity 28 125 kg Motion Times
Dump box:
Dumping 14 seconds
Engine
Detroit Diesel Engine DDEC IV Series 60, Tier/Stage 2 Power Rating at 2 100 rpm 298 kW/400 hp
Maximum torque at 1 350 rpm 1 898 Nm MSHA Part 7 ventilation rate 793 m3/min MSHA Part 7 particulate index 241 m3/min Transverter
Dana Series 6000
Converter
Spicer CL-8000 Series
Axles
Rock Tough Series 508
Degree of oscillation 18º (9º on each side) Brakes
Service/Parking/Emergency SAHR Tyres
Dimension 18.000R33
* As applications and conditions vary, Atlas Copco recommends that the user consults with tire suppliers to obtain the optimum tire selection.
Hydraulic system
System pressure 15.8 Mpa
Hydraulic tank capacity 238 liters Cylinders diameter:
Two steer cylinders 152 mm Two hoist cylinders 228 mm Dump cylinder diameter 228 mm Electrical system
Voltage, system
start & accessories 24 V Alternator, high output 140 A
Hydraulic warning system Level, hyd. temp.
Fuel
Fuel tank capacity 439 litres Fuel consumption, full load 35.5 litres/hour
Standard Equipment Engine
Dry type air cleaner Exhaust heat protection Remote engine oil drain
Cooling package with v-core radiator Transmission
Full power shift, 4 speed forward/reverse Torque converter
Single stage with lock up Axles
Spiral bevel differential, full floating, planetary wheel end drive Conventional front differential
Rear axle, trunnion mounted, self-lubricating bushings Brakes
Fully enclosed, force cooled, spring applied hydraulic released multiple wet discs at each wheel end
Tyres
Tubeless, steel radial, lug tread design for underground service Operator’s compartment
Canopy ISO ROPS/FOPS approved
Side seated operator for bi-directional operation Grammer seat with retractable seat belts
Two pilot operated joysticks for steering and dump control Electrical system
Rock Tough protection lights Isolation switch lockout
Optional Equipment Main Frame
Shipping covers, cabin Ergonomics
Forward facing cab
KAB 555 seat w/retractable seatbelts cabin Heater
Air conditioner, cabin
Side seated with steering wheel, canopy System options
Ansul dual bottle fire suppression with engine kill Electric hydraulic tank fill pump
Lincoln auto lube with timer Wiggins fast fuel fill Electrical system
Amber strobe light - power on 24/12 V power converter, cabin Load lights
Side light opposite operator, cabin Drive train
Converter- no lock up Controls and instruments Blockout 3rd and/or 4th gears Load man, cabin
Speedometer
Automatic transmission control Back up camera and monitor Power unit
Epoxy coated radiator Parts kit
1 000 hour consumables Articulation repair kit Maintenance kit Documentation
LinkOne parts catalogue, CD Parts and service manual - plasticized Extra DDEC manual kit
Other Tool box, cabin
UnDeRgROUnD TRUCkS
grade performance
MT431B standard configuration, empty box.
NB. 3% rolling resistance assumed. Actual performance may vary depending on the application.
MT431B standard configuration, loaded box.
NB. 3% rolling resistance assumed. Actual performance may vary depending on the application.
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Ratio
1st gear (kph) 5.7 5.7 5.7 5.7 5.7 5.6 5.6 5.6 5.6 5.6 5.6
2nd gear (kph) 10.2 10.2 10.1 10.1 10.0 10.0 10.0 9.9 9.9 9.8 9.8
3rd gear (kph) 18.0 17.9 17.7 17.6 17.4 17.4 17.3 16.0 14.4 12.2
4th gear (kph) 32.0 31.5 31.0 27.1 20.4
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Ratio 1:12 1:10 1:8 1:7 1:5
1st gear (kph) 5.70 5.67 5.64 5.61 5.59 5.56 5.53 5.50 5.47 5.45 5.42
2nd gear (kph) 10.15 10.06 9.97 9.88 9.79 9.65 8.77 7.77 6.51 3rd gear (kph) 17.84 17.55 17.27 14.85 10.95
4th gear (kph) 31.36 26.70
Dump box data STD
Material density (t/m3) 1.6 1.8 2.0 2.4
Volume, SEA struck (m3) 16.2 13.7 12.3 9.8
Volume, Semi-heaped (m3) 17.3 15.2 13.9 11.5
Volume, SAE heaped (m3) 18.5 16.7 15.5 13.2
Width, Dump box (mm) W 3 050 2 795 2 795 2 795
Dump position: Box height, max (mm) H1 4 650 5 420 5 365 5 200
Tramming position: Dump box height (mm) H2 2 600 2 445 2 400 2 175
Dump position: Clearance (mm) C 350 300 385
-Dump boxes
UnDeRgROUnD TRUCkS
59
°
15
°
3555 3430
10180
2740
1465
5365 (H1)
2400 (H2) 385 (C)
5020 370
2795 2795
(W)
42.5°
4440
R4650 R8570
5280
5280
4440
2000 X 45°
Chamfered Corner
4500
5000
left turning radius
• Turning radius left and right are symmetrical
• Dimensions shown are based on standard vehicle configuration with 25 mm tyre deflection.
• All dimensions are shown in millimetres.
Dimensions and weights
• Approximate net weight MT431B ... 28 000 kg
• Axle load, front end ... 19 900 kg
• Axle load, back end ... 8 100 kg Standard equipped vehicle with empty box
Turning angle +/-42.5°
Recommended drift size
UnDeRgROUnD TRUCkS
Minetruck MT436B
Features
• ROPS/FOPS canopy with back protection
• Jacobs engine brake provides increased brake life, automatic engine overspeed protection, and reduced heat from braking
• Electric transmission shift control for convenient shifting
• Converter lockup offers better power transfer, less heat and longer component life
• Centralized lubrication simplifies maintenance
• SAHR brake system offers long component life and very reliable braking
The Minetruck MT436B is a 32.6 metric ton capacity underground truck for large underground operations in mining and construction. The Atlas Copco MT436B is ready to deliver reliable productivity to your operation.
UnDeRgROUnD TRUCkS
Standard Equipment Specifications
Minetruck MT436B Capacities, SAE regulations
Tramming capacity 32 650 kg Motion Times
Dump box:
Dumping 14 seconds
Engine
Detroit Diesel Engine DDEC IV Series 60, Tier/Stage 2 Power rating at 2 100 rpm 298 kW/400 hp
Maximum torque at 1 350 rpm 1 898 Nm MSHA Part 7 ventilation rate 793 m3/min MSHA Part 7 particulate index 241 m3/min Transmission
Dana Series 6000
Converter
Dana CL-8000 Series
Axles
Rock Tough Series 508
Degree of oscillation 18º (9º on each side) Brakes
Service/Parking/Emergency SAHR Tyres
Dimension 26.5R25*
* As applications and conditions vary, Atlas Copco recommends that the user consults with tire suppliers to obtain the optimum tire selection.
Hydraulic system
System pressure 15.8 Mpa
Hydraulic tank capacity 238 liters Cylinders diameter:
Two steer cylinders 152 mm Two hoist cylinders 228 mm
Dump cylinder 228 mm
Electrical system Voltage, system
start & accessories 24 V Alternator, high output 140 A
Hydraulic warning system Level, hyd. temp.
Fuel
Fuel tank capacity 439 litres Fuel consumption, full load 35.5 litres/hour
Engine
Dry type air cleaner Exhaust heat protection Remote engine oil drain
Cooling package with v-core radiator Transmission
Full power shift, 4 speed forward/reverse Converter
Single stage with lock up Axles
Spiral bevel differential, full floating, planetary wheel end drive Conventional front differential
Rear axle, trunnion mounted, self-lubricating bushings Brakes
Fully enclosed, force cooled, spring applied hydraulic released multiple wet discs at each wheel end
Tyres
Tubeless, steel radial, lug tread design for underground mine service
Operator´s compartment
Canopy ISO ROPS/FOPS approved
Side seated operator for bi-directional operation Grammer seat with retractable seat belts
Two pilot operated joysticks for steering and dump control Electrical system
Rock Tough protection lights Isolation switch lockout
Optional Equipment Main Frame
Wheel chocks Shipping covers, cabin Ergonomics
Enclosed, cabin Heater
Air conditioner, cabin
KAB 555 seat w/retractable seatbelts cabin Side seated with steering wheel, canopy System options
Ansul dual bottle fire suppression with engine kill Electric hydraulic tank fill pump
Lincoln auto lube with timer Wiggins fast fuel fill Electric brake release pump Electrical system
Amber strobe light - power on Load lights
Side lights- opposite operator cabin Tail and brake lights
Front and rear red lights 2 each Block heater, 240 V
24/12 V power converter cabin Drive train
Converter- no lock up Controls and instruments
Blockout 3rd and/or 4th gears (only side seated versions) Fuel gauge in panel (front seated cabin)
Load man weighing system Speedometer
Automatic transmission control Back up camera and monitor Power unit
Epoxy coated radiator Parts kit
1 000 hour consumables Documentation
CatBase parts catalogue, CD LinkOne parts catalogue, CD Parts and service manual - plasticized Extra DDEC manual kit
Other Tool box, cabin Standard Equipment
UnDeRgROUnD TRUCkS
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Ratio 1:12 1:10 1:8 1:7 1:5
1st gear (kph) 4.99 4.97 4.94 4.92 4.90 4.87 4.85 4.83 4.80 4.78 4.76
2nd gear (kph) 8.89 8.82 8.74 8.67 8.59 8.51 7.87 7.12 6.08 4.97
3rd gear (kph) 15.63 15.39 15.16 13.36 10.29 4th gear (kph) 27.51 24.03
MT436B standard configuration, empty box.
NB. 3% rolling resistance assumed. Actual performance may vary depending on the application.
MT436B standard configuration, loaded box.
NB. 3% rolling resistance assumed. Actual performance may vary depending on the application.
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Ratio
1st gear (kph) 5.01 5.0 4.98 4.97 4.96 4.95 4.94 4.92 4.91 4.90 4.89
2nd gear (kph) 8.95 8.91 8.87 8.83 8.79 8.75 8.71 8.67 8.65 8.60 8.56
3rd gear (kph) 15.81 15.68 15.56 15.44 15.31 15.19 14.81 13.64 12.25 10.47 4th gear (kph) 28.07 27.67 27.27 25.37 20.84
Dump box data STD
Material density (t/m3) 1.8 2.0 2.2 2.4
Volume, SEA struck (m3) 16.6 14.4 13.0 11.8
Volume, Semi-heaped (m3) 18.4 16.3 14.8 13.8
Volume, SAE heaped (m3) 20.2 18.2 16.7 15.8
Width, dump box (mm) W 3 355
3 050
3 355
3 050 3 050 3 050
Dump position: Box height, max (mm) H1 5 440 5 520
5 320
5 385 5 410 5 240
Tramming position: Dump box height (mm) H2 2 510
2 595 2 430 2 370 2 255
Dump position: Clearance (mm) C 210 315 350 250
grade performance
Dump boxes
UnDeRgROUnD TRUCkS
3050 (W) 3065
59
°
15
°
3555 3430
10180
2680
1465
5385 (H1)
2430 (H2) 315 (C)
5020 305
42.5°
4540
R4515 R8570
5380
5380
4540
2000 X 45°
Chamfered Corner
Turning angle +/-42.5°
left turning radius
• Turning radius left and right are symmetrical
• Dimensions shown are based on standard vehicle configuration with 25 mm tyre deflection.
• All dimensions are shown in millimetres.
Dimensions and weights
• Approximate net weight MT436B ... 30 600 kg
• Axle load, front end ... 20 500 kg
• Axle load, back end ...10 100 kg Standard equipped vehicle with empty box
4500
5000
Recommended drift size
UnDeRgROUnD TRUCkS
Minetruck MT436lP
Features
Operator’s compartment
Ergonomically and spacious designed compartment for maximum safety and minimal operator fatigue with:
• ROPS/FOPS canopy with back protection and sound suppression
• Comfortable operator’s seat providing improved ergonomic positioning, body orientation and generous shoulder and hip room
• Enhanced operator visibility with the use of
- forward and rear viewing cameras, each coupled to a canopy mounted monitor and linked to the
transmission providing good visibility in both tramming directions
Power frame
• Converter lockup offers better power transfer, less heat and longer component life
• Jacobs engine brake provides increased brake life, automatic engine overspeed protection, and reduced heat from braking
• Electric transmission shift control for convenient shifting
• SAHR brake system offers long component life and very reliable braking
general
• Long-life tapered roller bearing centre hinge
• Maximum operating ambient temperature 52°C (125°F)
• Central manual lubrication
• Hydraulic hoses, electric cables and hot surfaces are well protected
The Atlas Copco MT436LP is ready to deliver reliable productivity to your operation.
The Minetruck MT436LP is a 32.6 metric ton capacity low profile underground truck, designed to work in low seam mining applications where the back height can get down to 2.8 m.
UnDeRgROUnD TRUCkS
Standard Equipment Specifications
Minetruck MT436LP Capacities, SAE regulations
Tramming capacity 32 650 kg Motion Times
Dump box:
Dumping 14 seconds
Engine
Detroit Diesel Engine DDEC IV Series 60 Power rating at 2 100 rpm 298 kW/400 hp Maximum torque at 1 350 rpm 1 898 Nm MSHA Part 7 ventilation rate 793 m3/min MSHA Part 7 particulate index 241 m3/min Transmission
Dana Series 6000
Converter
Dana CL-8000 Series
Axles
Rock Tough Series 508
Degree of oscillation 18º (9º on each side) Brakes
Service/Parking/Emergency SAHR Tyres
Dimension 26.5R25*
* As applications and conditions vary, Atlas Copco recommends that the user consults with tire suppliers to obtain the optimum tire selection.
Hydraulic system
System pressure 15.8 Mpa
Hydraulic tank capacity 238 liters Cylinders diameter:
Two steer cylinders 152 mm Two dump cylinders 228 mm Filtration, return line 4.0 µm Electrical system
Voltage, system
start & accessories 24 V Alternator, high output 140 A
Hydraulic warning system Level, hyd. temp.
Fuel
Fuel tank capacity 439 litres Fuel consumption, full load 95 litres/hour
Fuel filtration 8.0 µm
Engine
Dry type air cleaner Exhaust heat protection Remote engine oil drain
Cooling package with v-core radiator Transmission
Full power shift, 4 speed forward/reverse Converter
Single stage with lock up Axles
Spiral bevel differential, full floating, planetary wheel end drive Conventional front differential
Rear axle, trunnion mounted, self-lubricating bushings Brakes
Fully enclosed, force cooled, spring applied hydraulic released multiple wet discs at each wheel end
Tyres
Tubeless, nylon, smooth tread design for underground mine service, on demountable rims
Operator´s compartment
Canopy MSHA-ISO ROPS/FOPS approved Forward facing seat with steering wheel Grammer seat with retractable seat belts forward and back up camera, with monitor Hydraulic system
Hella projection lights Heavy duty gear type pumps Electrical system
Rock Tough protection lights Isolation switch lockout Fuel
Anti-siphon fuel supply
Optional Equipment Main Frame
Wheel chocks System options
Ansul dual bottle fire suppression with engine kill Lincoln auto lube with timer
Electrical system
Amber strobe light - power on Side lights
Tail and brake lights Controls and instruments Blockout 4th gears
DDEC - Diagnostic data reader Power unit
Epoxy coated radiator Parts kit
1 000 hour consumables Articulation Repair Kit Documentation
LinkOne parts catalogue, CD
Operator´s and maintenance manual - plasticized Other
Face mechanics tool set Tool box
UnDeRgROUnD TRUCkS
MT436LP standard configuration, empty box.
NB. 3% rolling resistance assumed. Actual performance may vary depending on the application.
MT436LP standard configuration, loaded box.
NB. 3% rolling resistance assumed. Actual performance may vary depending on the application.
grade performance
Dump boxes
Percent grade 0.0 2.0 4.0 6.0 8.3 10.0 12.5 14.3 16.0 18.0 20.0
Ratio 1:12 1:10 1:8 1:7 1:5
1st gear (kph) 4.8 4.7 4.7 4.6 4.5 4.4 4.4 4.3 4.3 4.3 4.2
2nd gear (kph) 8.5 8.2 8.0 7.8 7.7 7.6 7.4 7.3 7.2 7.1 6.9
3rd gear (kph) 14.5 13.9 13.5 13.2 12.7 12.3 11.8 11.3 10.7 9.8 8.9
4th gear (kph) 24.8 23.6 22.2 20.9 18.3 15.6 12.0
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.3 16.0 18.0 20.0
Ratio 1:12 1:10 1:8 1:7 1:5
1st gear (kph) 4.7 4.5 4.4 4.3 4.2 4.2 4.1 4.0 3.9 3.8 3.7
2nd gear (kph) 8.1 7.7 7.5 7.2 6.9 6.7 6.2 5.8 5.2 4.6 4.0
3rd gear (kph) 13.6 12.9 12.0 10.8 8.7 7.1
4th gear (kph) 22.8 19.4 13.4
Dump box data STD
Material density (t/m3) 2.2
Volume, SEA struck (m3) 13.0
Volume, Semi-heaped (m3) 14.8
Volume, SAE heaped (m3) 16.7
Width, dump box (mm) 3 353
Dump position: Box height, max (mm) 5 402
Tramming position: Dump box height (mm) 2 300
Dump position: Tailgate clearance (mm) 343
UnDeRgROUnD TRUCkS
3000
5000
1676 3353
3064 3353
10182 1730
299 5020 3431
2300
2300
3353
5492
R4372 R8571
4653
42.5º
Turning angle +/-42.5°
left turning radius
• Turning radius left and right are symmetrical
• Dimensions shown are based on standard vehicle configuration with 25 mm tyre deflection.
• All dimensions are shown in millimetres.
Dimensions and weights
• Approximate net weight MT436LP ... 30 600 kg
• Axle load, front end ... 20 500 kg
• Axle load, back end ...10 100 kg Standard equipped vehicle with empty box
Recommended drift size
UnDeRgROUnD TRUCkS
Minetruck MT5020
Features
Dump box
• Optimum box profile for clean and fast dumping
• Box support and lock for safe work under box Operator’s compartment
• Ergonomically and spacious designed compartment for maximum safety and minimal operator fatigue with:
- Forward seating enclosed cabin
- ROPS and FOPS certified for maximum safety - Air conditioning for convenient working conditions - Tilt-telescopic steering wheel
- Trainer seat
- Compliant with sound regulations to minimize operator’s fatigue; reduced noise level to 83 dB(A) inside the cab
- wide windows for safety and enhanced operator’s visibility
- 3 point mounting points for entry and exit from operator’s compartment
- Back up camera and monitor for operator assistance
Power frame
• The front axle suspension, a hydro-pneumatic system for improved operator comfort and vehicle handling
• Atlas Copco unique powertrain includes an upbox, a combined transmission and converter for improved visibility and accessibility to components
• Electronic transmission and engine control system for smooth and precise shifting
• A high power-to-weight ratio general
• Great serviceability with centralized service points
• Long-life roller bearing centre hinge
• Anti skid material at service access points
• Maximum operating ambient temperature 52°C (125F)
• Central manual lubrication
• Hydraulic hoses, electric cables and hot surfaces are well routed and protected
• Improved tire life with Bridgestone
• Carries the highest speed per ton
The Minetruck MT5020 is a fast 50 metric ton capacity underground truck, with an ergonomically designed operator’s compartment for unparalleled productivity in demanding underground mines.
UnDeRgROUnD TRUCkS
Main frame
Wheel chocks and chock brackets Ergonomic
KAB 555 seat W/retractable seatbelts System
Ansul dual bottle fire suppression with Engine kill Electric hydraulic tank fill pump
Dual fuel filter
Lincoln auto lube with timer
Wiggins fast fuel-, transmission-, hydraulic- oil fill Electrical system
Amber strobe light - power on Load lights
Side light opposite operator Tail and brake lights Turn signals, front and rear 24/12 V power converter Loading camera Battery heater, 120 V Block heater, 120 V Hydraulic oil heater, 120 V Engine oil heater, 120 V Fuel heater
Drive train option Neutral brake apply Controls and instruments Blockout 5th and/or 6th gears Emergency steering- accumulator type Extended data gauge package Power unit
Epoxy coated radiator Parts kit
1 000 hour consumables Documentation
LinkOne parts catalogue, CD Parts and service manual - plasticized Other
Tool box
Standard Equipment Specifications
Minetruck MT5020 Capacities, SAE regulations
Tramming capacity 50 000 kg
Motion Times Dump box:
Dumping 15 seconds
Engine
Cummins Diesel Engine QSK19-C650, Tier/Stage 1 Power Rating at 2 100 rpm 485 kW/650 hp
Maximum torque at 1 300 rpm 3 084 Nm MSHA Part 7 ventilation rate 1 274 m3/min Ventilation particulate index 934 m3/min Transmission and Converter
Allison M6610AR
Axles
Kessler 106
Brakes
Service/Parking/Emergency SAHR Tyres
Dimension 35/65R33*
Ply rating MS
* As applications and conditions vary, Atlas Copco recommends that the user consults with tire suppliers to obtain the optimum tire selection.
Suspension
Suspension, max 140 mm
Hydraulic system
System pressure 20.7 Mpa
Hydraulic tank capacity 238 liters Filtration, return line 4.0 micron Cylinders diameter:
Two steer cylinders 160 mm
Two dump cylinders 177.8 mm
Two suspension cylinders 125 mm Electrical system
Voltage, system
start & accessories 24 V Alternator, high output 100 A
Hydraulic warning system Level, hyd. temp. oil Fuel
Fuel tank capacity 644 litres Fuel consumption, full load 57 litres/hour
Fuel filtration 10 µm
Engine
Rock Tough purifier and silencer Dry type air cleaner
Exhaust heat protection Remote engine oil drain
Cooling package with flat, round, mechanical radiator Transmission and converter
Planetary, automatic 6 speeds forward/ 2 speeds reverse with integral single stage converter with automatic lock up Up box: Power transmitted through a 1:1 gear ratio box Drop box: Power transmitted through a 1:1 gear ratio box Axles
Conventional front and rear differential
Front-axle oscillating suspension “A” frame with hydraulic suspension cylinders and accumulator cushioning All wheel drive
Brakes
Fully enclosed, force cooled, spring applied hydraulic released multiple wet discs at each wheel end
Hydraulic retarder
Tyres
Tubeless, steel radial, lug tread design for underground mine service
Suspension
The suspension is a hydro-pneumatic system for improved operator comfort and vechicle handling while minimizing frame stress
Individual self leveling suspension Operator’s compartment Forward facing seat
Cabin ISO ROPS/FOPS approved Grammer seat with retractable seat belts Air conditioner
Trainer seat
Back up video monitor Hydraulic system
Heavy duty gear type pumps Electrical system
Hella projection lights Isolation switch lockout FuelAnti-siphon fuel supply
Optional Equipment
Standard Equipment
UnDeRgROUnD TRUCkS
MT5020 standard configuration, empty box.
NB. 3% rolling resistance assumed. Actual performance may vary depending on the application.
MT5020 standard configuration, loaded box.
NB. 3% rolling resistance assumed. Actual performance may vary depending on the application.
grade performance
Dump boxes
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Ratio 1:12 1:10 1:8 1:7 1:5
1st gear (km/h) 6.6 6.5 6.5 6.4 6.4 6.3 6.3 6.2 6.2 6.1 6.1
2nd gear (km/h) 9.8 9.6 9.5 9.4 9.3 9.2 9.1 9.0 8.9 8.7 8.7
3rd gear (km/h) 12.9 12.7 12.5 12.3 12.1 11.9 11.7 11.6 11.4 11.3 11.2
4th gear (km/h) 19.1 18.6 18.2 17.7 17.3 17.0 16.7 16.4 16.1 15.8 15.3
5th gear (km/h) 25.4 24.6 23.8 23.1 22.6 22.0 21.5 20.7 18.9 17.3 6th gear (km/h) 37.0 35.2 33.9 32.7 31.5 27.7
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Ratio 1:12 1:10 1:8 1:7 1:5
1st gear (km/h) 6.5 6.4 6.3 6.1 6.0 5.9 5.8 5.7 5.7 5.6 5.5
2nd gear (km/h) 9.5 9.3 9.0 8.8 8.6 8.4 8.2 8.1 7.9 7.5 6.9
3rd gear (km/h) 12.6 12.1 11.7 11.3 11.0 10.7 10.3 9.3 8.5
4th gear (km/h) 18.2 17.2 16.6 15.9 14.3 12.4 5th gear (km/h) 23.9 22.5 21.3 17.8
6th gear (km/h) 34.0 31.0
Dump box data STD
Material density (t/m3) 1.8 2.0 2.2 2.4
Volume, SEA struck (m3) 26.2 23.1 20.3 18.5
Volume, Semi-heaped (m3) 27.8 25.5 22.7 20.8
Volume, SAE heaped (m3) 31.3 27.8 25.0 23.4
Width, dump box (mm) W 3 400 3 200 3 200 3 200
Dump position: Box height, max (mm) H1 7 015 6 910 6 800 6 720
Tramming position: Dump box height (mm) H2 3 255 3 160 3 000 2 885
Dump position: Clearance (mm) C 410 410 410 410
UnDeRgROUnD TRUCkS
2815
13° 455
3515 1975 3700
5675 11220
410 (C)
3150 (H2)
6915 (H1) 62°
3200 3200 (W)
5930 2 000 x 45° Chamfered corner 5080
R4790
R9320 59305080
3204
5000
5500
• Dimensions shown are based on standard vehicle configuration with 27 mm tyre deflection.
• All dimensions are shown in millimetres.
Dimensions and weights
• Approximate net weight MT5020 ... 42 000 kg
• Axle load, front end ... 29 700 kg
• Axle load, back end ... 12 300 kg Standard equipped vehicle with empty box
Turning angle +/-42.5°
Right turning radius Recommended drift size
UnDeRgROUnD TRUCkS
Minetruck MT6020
Features
Dump box
• Optimum box profile for clean and fast dumping
• Box support and lock for safe work under box Operator’s compartment
• Ergonomically and spacious designed compartment for maximum safety and minimal operator fatigue with:
- Forward seating enclosed cabin
- ROPS and FOPS certified for maximum safety - Air conditioning for convenient working conditions - Tilt-telescopic steering wheel
- Trainer seat
- Compliant with sound regulations to minimize operator’s fatigue; reduced noise level to 83 dB(A) inside the cab
- Wide windows for safety and enhanced operator’s visibility
- 3 point mounting points for entry and exit from operator’s compartment
- Back up camera and monitor for operator assistance
Power frame
• The front axle suspension, a hydro-pneumatic system for improved operator comfort and vehicle handling
• Atlas Copco unique powertrain includes an upbox, and a combined transmission and converter for
• Atlas Copco unique powertrain includes an upbox, and a combined transmission and converter for