INSTRUMENTS AND CONTROLS
EACH SCREEN DISPLAY AND VALUE INPUT METHOD
<Engine coolant temperature gauge display>
<DPF soot level gauge display>
<Clock/Calendar display (ATM specification vehicles)>
<Engine oil pressure, Engine oil temperature gauge display>
INSTRUMENTS AND CONTROLS
<Voltmeter display>
<Trip management display>
To change the display to the dis-tance setting screen, push the mode select switch or the select switch for more than 1 second or turn the return switch for more than
1 second while the operation con-trol screen is displayed. A cursor will be displayed on the thousands digit.
Press the mode select switch to change a number.
Press and hold the mode switch to continuously increase a number.
Turn the select switch or return switch to move the cursor.
・The distance can be set by 1 mile within the range of 0 to 5,000 miles.
・The remaining driving distance is decreased by 1 mile.
Set the distance to “0” to reset the operation control function.
When the remaining driving dis-tance reaches 50%, 10% or 0% of the set distance, a notice will appear on the screen and blink 14 times.
While the monitor displays a screen other than the operation control screen, an operation con-trol notice will interrupt the screen and blink for 14 seconds.
If the monitor is displaying a warn-ing indicator, the operation control notice will not interrupt the warning indicator display. However, when the mode switch is pressed to change the display or the warning indicator display is cancelled, the operation control notice will inter-rupt and blink for 14 seconds.
If the ignition key is turned to the OFF position while the notice appears and blinks, the notice will resume the next time the ignition key is turned to the ON position.
NOTE:
Whenever the select switch or the return switch is turned for more than 1 second while oper-ating, the display will return to the normal screen.
The cursor returns to the thou-sands digit after the ones digit.
The indicated remaining driving distance may be different from the one that is displayed on trip meter A or B.
Setting is not available while driving the vehicle.
Park the vehicle in a safe
loca-INSTRUMENTS AND CONTROLS
tion, and then input the dis-tance.
<Hour meter display>
The hour meter indicates the total running time of the engine at a des-ignated engine speed. This helps determine maintenance and inspec-tion intervals.
The hour meter continuously counts and displays up to 199999 hours.
The minimum unit is 1 hour.
The trip hour meter displays up to 999.9 hours, and then returns to 0.0 hours.
The minimum unit is 0.1 hour (6
When the mode switch is pressed for more than 1 second while the hour meter is displayed, the trip hour meter is reset to “0.0”.
NOTE:
The trip hour meter indicates 000.0 while resetting.
The trip hour meter does not count while resetting.
<Maintenance and inspection dis-play>
When turning the select switch (for less than 1 second) while the maintenance and inspection dis-play appears, the ash level gauge is displayed. Then, when turning the switch more (for less than 1 second), the general maintenance and inspection screen is displayed.
For details on the DPF ash level gauge, refer to the "Regular main-tenance for the DPF" on page 11-70.
<DPF ash level gauge display>
INSTRUMENTS AND CONTROLS
<Several maintenance and inspec-tion screen displays>
Engine oil
Transmission oil
Differential oil
Tire
Engine belt
Coolant
INSTRUMENTS AND CONTROLS
Air cleaner element
Fuel filter
Air dryer
User setting 1
User setting 2
User setting 3
To change the display to the input screen of the periodic replacement intervals, push the mode select switch or the select switch for more
INSTRUMENTS AND CONTROLS
than 1 second or turn the return switch for more than 1 second while the maintenance and inspec-tion screen is displayed. A cursor will be displayed on the year posi-tion.
When the mode select switch is pressed, the number is changed.
・The date can be set as follows.
Year: 2008 to 2038
Month: January to December Day: 1 to 31
・The distance can be set by 1 mile within the range of 1 to 6 digits (from 0 to 999,999 miles).
・The remaining driving distance is decreased by 1 mile.
When the mode select switch is pressed and held, the number is continuously increased.
When the select switch or the return switch is turned, the cursor is moved.
・The cursor returns to the distance position after the date position.
When the remaining driving dis-tance reaches “0” (the vehicle has
been driven for the set distance) or the set date comes, a warning and an item to be replaced are dis-played while the parking brake is applied.
To reset the maintenance and inspection display, set the distance to “0” or set the date to the present or the past date.
The remaining driving distance is preliminarily set to 600 miles in the user setting 1 as a factory default setting.
Contact the nearest authorized UD Trucks dealer for the 600 miles inspection.
NOTE:
Whenever the select switch or the return switch is turned for more than 1 second while oper-ating, the display will return to the normal screen.
The number of the set distance for replacement may be different from the one that is displayed on the trip meter A or B.
Setting is not available while driving the vehicle.
Park the vehicle in a safe loca-tion, and then input the replace-ment interval.
<Settings display>
INSTRUMENTS AND CONTROLS
<Calendar and clock display>
To set the calendar and clock dis-play, press the mode select switch or the select switch for more than 1 second or turn the return switch for more than 1 second while the cal-endar and clock display is shown.
A cursor will be displayed and blink on the year position.
Clock display: AM 12:00 - 11:59 PM 12:00 - 11:59
Press the mode select switch while the cursor blinks to change the number.
Press and hold the mode select switch to continuously increase the number.
Turn the select switch or return switch to move the cursor.
When the odo/trip switch located on the right side is pressed for less
than 1 second in the clock setting mode, the minutes of the clock will change to "00" and the display will return to the normal screen.
・When the minutes are in the 00 to 29 range, the minutes will be reset to “00”.
・When the minutes in the 30 to 59 range, the hour will advance by 1 hour and the minutes will be reset to “00”.
INSTRUMENTS AND CONTROLS
NOTE:
Whenever the select switch or the return switch is turned for more than 1 second while oper-ating, the display will return to the normal screen.
The cursor returns to the year position after the minute posi-tion.
Setting is not available while driving the vehicle.
Park the vehicle in a safe
loca-tion, and then input the time and date.
<Language setting screen>
To select language, push the mode switch or the select switch for more than 1 second or turn the return switch for more than 1 second while the language setting screen is displayed. Press the mode switch to select a language. The selected language will blink.
When the mode switch or the select switch is pressed for more than 1 second or the return switch is turned for more than 1 second
while operating, the display will return to the normal screen.
Language can be selected from English, Chinese and Japanese.
NOTE:
Setting is not available while driving the vehicle.
Park the vehicle in a safe loca-tion, and then select a language.
CAUTION
When setting the clock on the calendar and clock display, always place the shift lever (MTM) or selector (ATM) in the neutral position. The combina-tion meter is equipped with the shift recognition function that automatically recognizes the transmission specification while setting the clock.
If the clock is set while the transmission is shifted in the R (Reverse) position, the shift indicator may not be displayed correctly.
INSTRUMENTS AND CONTROLS
WARNINGS AND INDICATORS