The message codes are presented in alphabetic order to make them easy to find. Error and Warning messages are used to inform you of errors that could potentially compromise the system function or security. Information messages provide more information about items that could potentially cause problems.
v BRLAU0001E: Authentication failure. The credentials entered were not accepted. Enter a different user name or password.
v BRLAU0002E: No password provided. A password must be entered in the corresponding field.
v BRLAU0003E: No user name provided. A user name must be entered in the corresponding field.
v BRLAU0004E: Internal error. An internal error occurred. Verify whether the PAM installation is working correctly.
v BRLAU0005E: Not a valid user name. The user name entered is invalid. Enter a different user name.
v BRLAU0006E: No PAM module available to perform authentication. Verify whether your system has the python PAM module available and working. For SLES11 systems, ensure that the python-pam package is installed.
v BRLAU0007E: Not able to identify installed Linux distribution. The tool could not determine which Linux distribution is installed. Verify that your file /etc/redhat-release (on RHEL systems) or /etc/SuSE-release (on SLES systems) is in the correct format.
v BRLAU0008E: The package pam-devel is not installed. Install it to perform authentication.
Depending on the Linux distribution, the IBM Installation Toolkit might need the package pam-devel installed on the system to work properly. Install the package pam-devel provided by the distro in order to fix this problem. For RHEL systems, be sure to install the ppc version of the package.
v BRLAU0009E: You must enable cookies to proceed. To authenticate, you must enable cookies in your web browser.
v BRLAU0010I: Session expired due to inactivity. For security reasons, after some inactivity time you must sign in again.
v BRLAU0011I: Your session has expired because a new user logged in. Your session has expired because a new user logged in.
v BRLBE0001W: Unknown unit: %(error)s. The memory detector failed because an unrecognized memory size unit was found in /proc/meminfo.
v BRLBE0005W: Cannot add files to a frozen %(name)s. The documentation search database is locked and can no longer have documents added to it.
v BRLBE0006W: No levels specified for the search system. The number of indexing levels for the documentation search database has not been specified. Specify a number of indexing levels.
v BRLBE0007W: No file specified for the search system index. No documents have been specified to be added to the documentation search database. Specify at least one document.
v BRLBE0008I: Indexing: '%(name)s'.... The specified document is being added to the documentation search database.
v BRLBE0009I: Search time: %(time)0.3fs. The documentation search database has had one document added to it in the specified number of seconds.
v BRLBE0010I: Indexed %(doc)s documents in %(time)0.3fs. The documentation search database has been created in the specified number of seconds.
v BRLBE0011I: Saved base: %(filename)s. The documentation search database has been created and written at the specified file.
v BRLCS0001E: No host name specified. The hostname field was left blank. You must provide the host name of the client to proceed.
v BRLCS0002E: Invalid host name. The host name entered in the hostname field is invalid. You must specify a valid host name for the client information.
v BRLCS0003E: No IP address specified. The IP address field was left blank. You must provide the IP address for the client information.
v BRLCS0004E: Invalid IP address. The provided IP address is either incomplete or in an invalid format. The IP address must follow the format [0-255].[0-255].[0-255].[0-255]. Examples of valid addresses are 10.2.0.1, 192.168.3.20. Examples of invalid addresses are 455.303.100.20 or 10.0.0. For more information, contact your network administrator.
v BRLCS0005E: No MAC address specified. The MAC address field was left blank. You must provide the MAC address for the client information.
v BRLCS0006E: Invalid MAC address. The provided MAC address is either incomplete or in an invalid format. The MAC address must follow the format [??]:[??]:[??]:[??]:[??:[??], where ? must be an integer from 0 to 9 or an uppercase character from A to F. Examples of valid
addresses are 00:15:58:0B:5A:5F, 12:29:80:00:30:03 and 22:4C:90:00:30:03. For more information, contact your network administrator.
v BRLCS0007E: No netmask specified. The network mask field was left blank. You must provide the network mask for the client information.
v BRLCS0008E: Invalid netmask. The provided network mask is either incomplete or in an invalid format. The network mask must follow the format [0-255].[0-255].[0-255].[0-255]. Examples of valid netmasks are 255.255.255.0, 255.255.255.128.
v BRLCS0009E: Invalid gateway. The provided gateway is either incomplete or in an invalid format. The gateway must follow the format [0-255].[0-255].[0-255].[0-255]. Examples of valid gateways are 10.0.0.1 192.168.3.1.
v BRLCS0010E: Invalid DNS server address. The provided DNS server address is either incomplete or in an invalid format. The DNS server address must follow the format [0-255].[0-255].[0-255].[0-255]. Examples of valid DNS server addresses are 10.0.0.5 192.168.5.3.
v BRLCS0011E: IP address already in use. The IP address entered is already in use by another device. Choose a different address and try again.
v BRLCS0012E: Physical interface already in use by another subnet. You tried to configure a new subnet on a network interface that already has a subnet configured. Two subnets cannot use the same physical network interface. However, the DHCP server configuration allows this case if the subnets are enclosed in a shared-network declaration. The tool currently does not support adding such a statement, but you can do it manually and run the tool afterwards.
Check the dhcpd.conf man page for further details on adding shared-network statements.
v BRLCS0013E: DHCP configuration file not available. The wizard could not find the DHCP configuration file when trying to perform the operation. Ensure that the file is available and try again.
v BRLCS0014E: Could not write DHCP file %s. Check the log for details. An unexpected error occurred while trying to write the DHCP configuration file to the file system. Check the application log for further details.
v BRLCS0015E: Could not apply changes. Error restarting the DHCP service. Check the logs for details. The DHCP service failed to restart. Check the application log for the DHCP error message.
v BRLCS0016E: Could not apply changes. Error performing backup of original DHCP file. Check the log for details. An unexpected error occurred when the tool tried to make a backup copy of the DHCP configuration file. Check the file system permissions and try again.
v BRLCS0017E: Could not apply changes. Error writing the System Tools clients file. Check the log for details. An unexpected error occurred while trying to write the System Tools file to the file system. Check the application log for further details.
v BRLCS0018W: Invalid clients found in DHCP configuration file. The tool encountered one or more hosts in the subnet that do not have a valid configuration. The hosts are missing a valid 'fixed-address' or 'hardware' header. You can manually edit the DHCP configuration file to fix the problem.
v BRLCS0019E: No client selected. Select at least one client or click Skip to continue. If you choose to import clients, you must select at least one of them. Otherwise, click Skip to continue without importing any clients.
v BRLCS0020E: Host name already in use. The host name entered is already in use. Try a different host name.
v BRLCS0021E: MAC address already in use. The MAC address entered is already in use. The system you are trying to add is probably already registered.
v BRLCS0022E: Could not read DHCP configuration file. Error at line %s, column %s. The DHCP configuration has a syntax error at the indicated location and the tool cannot read it. Check and correct the file syntax and try again.
v BRLCS0023I: No clients registered. No clients are currently registered in the tool.
v BRLCS0024E: No client selected. No client was selected to perform the operation. You must select a client for an action to be performed.
v BRLCS0025E: Not able to find DHCP service template. The DHCP service template file
/etc/init.d/dhcpd cannot be found. The DHCP server is probably not installed in the system.
Verify that the DHCP server is properly installed and then run the tool again.
v BRLCS0026E: Error when trying to read DHCP configuration file. Check the log for details. The System Tools application was not able to read the system DHCP configuration file due to an unexpected error. Consider creating a new empty file and then run the tool again.
v BRLCS0027E: Invalid headers entered. The configuration headers entered are in an invalid format. Check the syntax and try again.
v BRLCS0028E: Invalid headers entered. Error at line %s, column %s. The configuration header entered at the specified location is in an invalid format. Check the syntax and try again.
v BRLCS0029I: Debug: %s. This is a generic message used for debugging purposes only.
v BRLCS0030W: DHCP configuration file not found. The System Tools application was not able to find the system DHCP configuration file. If you proceed, the tool will create a file at the standard location /etc/dhcpd.conf.
v BRLCS0031E: Could not apply changes. Error performing backup of original System Tools file.
Check the log for details. An unexpected error occurred when the tool tried to make a backup copy of the System Tools configuration file. Check the file system permissions and try again.
v BRLCS0033W: Configuration has been changed. Click Apply changes to save your changes. Click Apply changes to save your changes before leaving the tool. If you quit the tool before clicking the button, all changes are lost.
v BRLCS0034E: Unable to remove yaboot.conf file for the following clients: %s. The tool could not remove the yaboot files that became unused for the hosts listed. Try to remove them manually.
v BRLCS0035E: Unable to create yaboot.conf file for the following clients: %s. The tool could not create the yaboot files for the hosts listed. Try to create them manually.
v BRLCS0036E: No subnet selected. A subnet must be selected to proceed.
v BRLCS0037E: Subnet entry not found. The subnet entry was not found by the tool. This might indicate an internal error. Try to restart the tool to fix the problem.
v BRLCS0038W: Configuration has been changed. Remember to click Apply changes on the Client systems management window to save your changes. When the configuration is changed, it is not immediately saved. You must click Apply changes on the Client systems management window to save the changes to the system.
v BRLCS0039I: No subnets registered. No subnets are currently registered in the tool.
Therefore, there are no entries in the table.
v BRLCS0040E: Could not write System Tools file %s. Check the log for details. An error occurred and the configuration file could not be saved. You can verify the application log for details on what might have caused the problem.
v BRLCS0041I: No subnets registered. Register a subnet to proceed. No subnets are currently registered in the tool. To continue using the tool, you must register a new subnet.
v BRLDB0001I: Debug: %s. This is a generic message used for debugging purposes only.
v BRLDB0003E: Error when calling %(name)s%(args)s: %(msg)s, at %(file)s, line %(line)d. This is a generic message used for debugging purposes only.
v BRLDP0001E: No partition selected. Select a partition from the displayed list.
v BRLDP0002E: Invalid partition size. Type an integer number greater than zero in the 'Size' field to create the partition.
v BRLDP0005E: Insufficient space to create a partition. The partition cannot be created because there is not enough available space on the disk. Enter a partition size for the new partition that does not exceed the available free space on the disk.
v BRLDP0008E: Cannot edit a PReP boot partition. You cannot edit a PowerPC Reference Platform (PReP) boot partition. Instead, you can create a PReP boot partition by clicking 'Create PReP'.
v BRLDP0011E: No disks selected. If there are two or more disks in the system, you must select one disk on which to create or delete partitions.
v BRLDP0028E: No blank space selected. You must select an available or blank space to ensure that the new partition is created where no other partitions already exist.
v BRLDP0029E: Cannot edit a blank space. You selected to edit a blank space. A blank space cannot be edited, only selected to create a partition.
v BRLDP0030E: Cannot edit an extended partition. You selected to edit an extended partition.
An extended partition cannot be edited, only deleted.
v BRLDP0031E: Cannot delete a blank space. You selected to delete a blank space. A blank space cannot be deleted, only selected to create a partition.
v BRLDP0032E: The selected distribution cannot format a partition as %s. The file system type selected is not supported by the distribution. Format the partition as a different file system.
v BRLDP0033E: The file system of a %s partition cannot be %s. The file system type selected is not compatible with the mount point for the partition. Select another file system or enter a different mount point.
v BRLDP0035E: The selected distribution cannot have a %s partition. The mount point of the partition is invalid for the selected distribution. Enter a different mount point.
v BRLDP0036E: The size of a %s partition must be exactly %d MB. For the specified partition type, you must enter the exact size given by the error message.
v BRLDP0037E: The size of a %s partition must be at least %d MB. For the specified partition type, you must enter a size that is no less than the size given by the error message.
v BRLDP0038E: The size of a %s partition must be at most %d MB. For the specified partition type, you must enter a size that is no more than the size given by the error message.
v BRLDP0039E: The size of a %s partition must be between %d MB and %d MB. For the specified partition type, you must enter a size in the range given by the error message.
v BRLDP0041E: Conflict found on partition %s when trying to fix %s. The same partition was selected for two or more fixes to be performed. Select a different partition for each fix.
v BRLDP0042E: No fix selected. Select at least one fix. No fix was selected. You must select at least one fix to be performed.
v BRLDP0043E: Partition size must be an integer. The size entered for the partition is invalid. Enter an integer number in the corresponding field.
v BRLDP0044E: Partition size not specified. No size was entered for the partition. You must enter a size for the partition in the corresponding field.
v BRLDP0045E: Mount point must be a path. The mount point entered is invalid. Enter a path as the mount point for the partition.
v BRLDP0046E: Mount point not specified for partition to be formatted. For Red Hat Enterprise Linux installations, when you choose to format a partition as a file system other than swap or PReP, you must also specify a mount point for the partition.
v BRLDP0047E: Primary partition %s has no file system or an unknown file system. For Red Hat Enterprise Linux installations, all primary partitions must be formatted as a valid file system. Edit and select a valid file system for the partition.
v BRLDP0048E: Partition must have a mount point. For Red Hat Enterprise Linux installations, when creating a partition of type other than swap or PReP, you must also specify a mount point for the partition.
v BRLDP0049E: Disk does not contain a valid MS-DOS partition table. The disk does not contain a valid MS-DOS partition table. To use the disk, you must create an MS-DOS partition table on
v BRLDP0050W: Creating an MS-DOS partition table will cause any data contained in the disk %s to be lost. Are you sure you want to proceed? When an MS-DOS partition table is created, all data on the disk is lost. Therefore, you must confirm the operation.
v BRLDP0051E: Partitions with file system "%s" cannot have a mount point. Do not specify a mount point. Partitions with the listed file system cannot have a mount point set. Leave the corresponding field blank.
v BRLDP0052E: The volume group name must contain only letters and underscores. The name of a volume group can contain only letters and underscores. Type a name that contains only those types of characters.
v BRLDP0053E: Volume group name not specified. No volume group name was provided. Type a name for the volume group.
v BRLDP0054E: The extent size must be an integer power of 2. The extent size for a volume group must be an integer number that is a power of 2, for example: 2, 4, 8, 16, and so on.
Type a number that is a power of 2.
v BRLDP0055E: Extent size for the volume group not specified. No extent size for the volume group name was provided. Type an extent size.
v BRLDP0056E: No physical volumes available. Set a physical disk partition file system as
"lvm" to create one. No physical volumes are available to create a volume group. Create a physical volume by setting the file system of a disk partition as 'lvm' and try again.
v BRLDP0057E: Physical volume not specified. No physical volume was selected to be used.
Select at least one physical volume to be used.
v BRLDP0058E: Cannot remove %s. It does not exist. The specified physical volume cannot be removed because it does not exist.
v BRLDP0059E: Cannot remove %s. It is used by the logical volumes: %s. The specified physical volume cannot be removed because it is used by the listed logical volumes. Remove some logical volumes first.
v BRLDP0060E: Cannot remove %s. Insufficient space in the volume group. The specified physical volume cannot be removed because the volume group would not have space enough to contain all the logical volumes it currently contains. Remove some logical volumes first.
v BRLDP0061E: Cannot remove %s. Unknown reason. The specified physical volume cannot be removed for an unknown reason.
v BRLDP0062E: Cannot add %s. Unknown reason. The specified physical volume cannot be added for an unknown reason.
v BRLDP0063E: No volume group selected for deletion. No volume group was selected. Select a volume group to delete.
v BRLDP0064E: Cannot delete the volume group %s. Unknown reason. The specified volume group cannot be deleted for an unknown reason.
v BRLDP0065E: No volume group selected for editing. No volume group was selected. Select a volume group to edit.
v BRLDP0066E: Cannot edit the volume group %s. It does not exist. The specified volume group cannot be edited because it does not exist.
v BRLDP0067E: Cannot delete /dev/%s. It is part of the LVM volume group %s. The specified partition cannot be deleted because it is a physical volume of the specified volume group.
Remove it from the volume group first.
v BRLDP0068E: Cannot edit /dev/%s. It is part of the LVM volume group %s. The specified partition cannot be edited because it is a physical volume of the specified volume group.
Remove it from the volume group first.
v BRLDP0069E: Cannot set /boot as the mount point for a non-physical disk partition. Only a physical disk partition can have the /boot directory set as the mount point. Set a physical disk partition instead.
v BRLDP0070E: Volume group "%s" already exists. Type another name. A volume group with the specified name already exists. Enter a name that is not already used by another volume group.
v BRLDP0071E: One or more partitions are part of an LVM volume group and cannot be deleted. At least one partition is used as a physical volume in an LVM volume group and cannot be
v BRLDP0071E: One or more partitions are part of an LVM volume group and cannot be deleted. At least one partition is used as a physical volume in an LVM volume group and cannot be