Exercise BExercise B - CONTROLLOGIX

Exercise B

1--18

1--18 Exercise: Identifying Logix5000 System Components

3. Place a check in the box after you locate eac h of the following controller components:

- Keyswitch

- Keyswitch positions - Controller LEDs

- Battery (or battery port, if empty) - Battery date label

- Serial cable and serial port - Top and bottom locking clips 4.

4. Using the module fac eplates and the labe ls inside the module doors, identify the name and the part number of each workstation module in the provided spaces:

00 11 22 33 44 55 66 77 88 99

A. Slot 0:

B. Slot 1:

C. Slot 2:

D. Slot 3:

E. Slot 4:

F.. Slot 5 (the door will not open):

- Remove the module in slot 5 - View the backplane - Find the node address dials - Replace the module

1--19 1--19 Exercise: Identifying Logix5000 System Components

Rev. February 2007 Rev. February 2007

CM3e56r G.

G. Slot 6:

- Remove the module in slot 6 - Find the network type dials - Find the node address dials - Replace the module H.

H. Slot 7:

I. Slot 8:

J. Slot 9:

Turn to the Answers section.

How Did You Do?

1--20

1--20 Exercise: Identifying Logix5000 System Components

Exercise A Exercise A

1. The ControlLogix platfor m is a high-performanc e, multi-controller system in a modular chassis format.

2. The SoftLogix platform use s a “virtual chassis .”

3. The CompactLogix platform has a set I/O cou nt because it is geared toward stand-alone control applications where panel space is limited. Additional I/O is not necessary unless the application is significantly changed.

4. The FlexLogix platfor m has a reduced size for smaller space s.

This makes it possible to place the platform within a close proximity to the machine or process.

5. The DriveLogix platfo rm is a system for distributed drive control.

6. All Logix5000 controll ers share the Logix50 00 control engine.

7. Answers may vary. The following responses are possible correct answers:

• Modularity allo ws for reconfiguration and repai r by replacing individual units.

• The modular form at of Logix5000 systems a llow users to design, build, and modify systems according to the needs of their application.

9. The backplane all ows data to be multicas t to multiple destinations.

Answers

1--21 1--21 Exercise: Identifying Logix5000 System Components

Rev. February 2007 Rev. February 2007

CM3e56r 10.

10. Slots are the openin gs in a chassis or on a DIN rail that hold individual modules.

12.

12. RTBs and IFMs are devices that provide inter connection between I/O modules and processes/machines. None of these components are included with the I/O modules.

13.

13. The battery in the controlle r maintains memory if the main power source is lost.

14.

14. The status indic ators on the front of a controller can be chec ked for module status informatio n.

15.

15. RSLinx Classic software provides an interface between RSLogix 5000 software and the system hardware, including the controller. RSLinx Classic software provides download and upload, online editing, and data monitoring functionality for Logix5000 systems.

Exercise B Exercise B

1. The chassis size is ten slot.

4. The workstation contains the following hardwa re:

A. 1756-OB16D digital output module B.

B. 1756-L63 (Logix5 563) controller C.

C. 1756-IB16D digital input module D.

D. 1756-L63 (Logix5563) controller E.

E. 1756-OB16D digital output module F

F.. 1756-CNB ControlNet bridge module G.

G. 1756-DHRIO DH+/RIO communications bridge module H.

H. 1756-OF6VI analog output module I.

I. 1756-IF6I analog input module J.

J. 1756-ENBT Ethernet/IP comm unications bridge module If you are not using a standard ControlLogix training workstation (Part No. ABT-TDCLX1), your answers may vary.

1--22

1--22 Exercise: Identifying Logix5000 System Components

Lesson Lesson 2 2

Rev. February 2007

After completing this lesson, you should be able to perform the following tasks:

• Identify RSLogix 5000 softw are components

• Configure the RSLogix 5000 soft ware display

Why These Skills Are Important Why These Skills Are Important

Being introduced to the main Logix5000 t programming software is important for the following reasons:

• Being able to quickly identif y and locate softwar e options and software components will reduce programming and maintenance time.

• Being able to customi ze the software to fit your working style will improve your programing speed and ease.

RSLogix 5000 Programming Software RSLogix 5000 Programming Software

Because of the common control engine, RSLogix 5000 software is used to program and configure all Logix5000 systems. It is used to perform the following tasks:

• Develop and modify code (e.g ., ladder logic, function block diagrams, etc.)

• Monitor project and system compon ents during operat ion

• Configure hardware modules

Software Benefits Software Benefits

RSLogix 5000 software offers the following benefits:

• Flexible, easy-to-use, Windows r-based editors and components

• I/O configuration wizards

• Ability to copy and paste compo nents between projects

• Same look and feel as RSLogix 5 and RS Logix 500 softwa re:

---- Ladder logic instruction set built on PLC-5 r instruction set

• Multiple programming language options (ladder logic , function block diagram, sequential function chart, and structured text):

---- Your configuration will depend on the language options selected and installed.

?

Is anyone familiar with RSLogix 5000Is anyone familiar with RSLogix 5000 software?

software?

Mention that RSLogix 5000 software is Mention that RSLogix 5000 software is similar in use to RSLogix 5 software for similar in use to RSLogix 5 software for PLC systems and RSLogix 500 software PLC systems and RSLogix 500 software for SLC systems.

for SLC systems.

If you are teaching the standard course, If you are teaching the standard course, mention that ladder logic will be mention that ladder logic will be discussed later in the course.

discussed later in the course.

In document CONTROLLOGIX (Page 35-41)