6.2 Feature Activation Procedure
6.2.1 Fast Return to LTE
The purpose of this chapter is just to guide the reader how to find the GUI location of the parameters which are related to the deployment of this feature. The values indicated by the captures possibly are not the real value to configure. Please refer to the last column of table in chapter 4.1 for the practical configuration value.
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration] interface and set the parameter “
RNC Switch of Fast Return to E-UTRAN”,
as shown in Figure 6-1Figure 6-1 Parameters configuration interface 1
Fast Return to LTE
ZTE Confidential Proprietary 50
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->UTRAN Cell->Extended Info of UTRAN Cell]
interface and set the parameter “Switch of PS Service Fast Return to
EUTRAN when CS is released for EUTRAN CSFB Multi-RAB Service”,
as shown in Figure 6-2.Figure 6-2 Parameters configuration interface 2
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->Extended Info of RNC] interface and set the
parameter “
PS Handover Mode when CS is released for EUTRAN CSFB Multi-RAB Service”, “Timer of Deactivate Compressed Mode for Fast Return to
EUTRAN”, “Timer for CSFB Identification(s)”,
as shown in Figure 6-3Figure 6-3 Parameters configuration interface 3
Fast Return to LTE
ZTE Confidential Proprietary 51
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->UTRAN Cell] interface and set the parameter
“Switch of Fast Return to
EUTRAN when EUTRAN CSFBCS is released”,
as shown in Figure 6-4Figure 6-4 Parameters configuration interface 4
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->UTRAN Cell->Extended Info of UTRAN Cell]
interface and set the parameter “
User Number with Compressed Mode Activation for Balance Strategy Based On Measurement”,
as shown in Figure 6-5.Fast Return to LTE
ZTE Confidential Proprietary 52
Figure 6-5 Parameters configuration interface 5
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->UTRAN Cell->Extended Info of UTRAN Cell]
interface and set the parameter “
Switch of Fast Return to EUTRAN for PS Only when UE RRC Status Transferring from CELL_DCH to CELL_FACH”,
as shown in Figure 6-6 Figure 6-6 Parameters configuration interface 6Fast Return to LTE
ZTE Confidential Proprietary 53
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->Extended Info of RNC] interface and set the
parameter “Switch of checking the UE E
-UTRACapability”,
as shown in Figure 6-7Figure 6-7 Parameters configuration interface 7
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->PLMN Relating Configuration->Logic RNC Configuration
] interface and set the parameter “RNC SRVCC Switch”,
as shown in Figure 6-8Figure 6-8 Parameters configuration interface 8
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->UTRAN Cell->Extended Info of UTRAN Cell]
interface and set the parameter “Switch of PS Service Fast Return to
EUTRAN when CS is released for EUTRAN SRVCC Multi-RAB Service”,
as shown in Figure 6-9.Fast Return to LTE
ZTE Confidential Proprietary 54
Figure 6-9 Parameters configuration interface 9
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->Extended Info of RNC] interface and set the
parameter “
PS Handover Mode when CS is released for EUTRAN SRVCC Multi-RAB Service”,
as shown in Figure 6-10Figure 6-10 Parameters configuration interface 10
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration-> UTRAN Cell] interface and set the parameter
“
Switch of Fast Return to EUT RAN when EUTRAN SRVCC CS is released”,
as shown in Figure 6-11Fast Return to LTE
ZTE Confidential Proprietary 55
Figure 6-11 Parameters configuration interface 11
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration-> PLMN Relating Configuration-> Logic RNC Configuration
] interface and set the parameter “
Dedicated priority RNC Switch”,
as shown in Figure 6-12Figure 6-12 Parameters configuration interface 12
Fast Return to LTE
ZTE Confidential Proprietary 56
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration-> UTRAN Cell->Extended Information 2 of UT RAN Cell
] interface and set the parameter “
Dedicated priority Switch”,
as shown in Figure 6-13 Figure 6-13 Parameters configuration interface 13In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->Extended info of RNC] interface and set the
parameter “
Switch of acquiring SPID based on IMEI”,
as shown in Figure 6-14.Fast Return to LTE
ZTE Confidential Proprietary 57
Figure 6-14 Parameters configuration interface 14
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->Global Information Configuration->SPID and PriGroup relationship Profile->SPID and PriGroup relationship] interface and set the
parameter “
SPID Index”,
as shown in Figure 6-15Figure 6-15 Parameters configuration interface 15
Fast Return to LTE
ZTE Confidential Proprietary 58
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->Service Configuration->RAN Priority When UE in Dedicated State
] interface and set the parameter “
Priority Group ID”,
as shown in Figure 6-16Figure 6-16 Parameters configuration interface 16
In the configuration resource tree window, open the [Modify Area->Managed Element->
UMTS Logical Function Configuration->Service Configuration->Imei TAC List for SPID]
interface and set the parameter “
SPID configured by RNC”, “Length of IMEI TAC”,”Imei
TAC”,
as shown in Figure 6-17Fast Return to LTE
ZTE Confidential Proprietary 59
Figure 6-17 Parameters configuration interface 17