File Commands

File commands are used open and save SEVIEW project files, open A DOS window, setup the printer , and to quit SEVIEW.

File Edit SESOIL AT123D MODFLOW Help

Open a SEVIEW Project Save as SEVIEW Project Go To DOS Close Save Save as... Print Printer Setup Exit

5.9.1.1 Open a SEVIEW Project

Use the Open a SEVIEW Project command to open an existing model project. When selected this option, SEVIEW will ask if you want to save changes to the current project. If you click yes SEVIEW will prompt you for a project file name.

You can open defaults SEVIEW projects contain in the Example Projects subfolder.

Be careful not to over right your current file.

If you do not choose a project file (Cancel is selected, the <ESCAPE> key is pressed, or the window is closed) the current project journal will be retained.

5.9.1.2 Save as SEVIEW Project

Use the Save as SEVIEW Project command to save your model project. When selected this option, SEVIEW will ask if you want to save changes to the current project. If you click yes SEVIEW will prompt you for a project file name. You can take the default option to save the data to the current project.

Be sure to save your data often.

5.9.1.3 Go To DOS

There is no need to quit SEVIEW to access DOS or to run a DOS program. The Go To DOS option provides easy access to DOS without closing SEVIEW. This command is simply a short cut to opening a DOS window.

As with any DOS window, type exit and press enter to close it.

This option can be used to help debug SESOIL and AT123D scenarios. Unlike the Run SESOIL and Run AT123D commands, this DOS window will not close once SESOIL has run. Allowing you to view any error messages.

5.9.1.4 Close

The File, Close option is used to close the currently opened file. If the file has been modified you will be prompted if the changes should be saved.

5.9.1.5 Save

The File, Save option is used to save the currently opened file. If the file has been modified the changes will be saved.

5.9.1.6 Save As

The File, Save As option is used to save the currently opened file as a new file. If the new file already exists the user will be asked if the file should be overwritten.

5.9.1.7 Print

The File, Print option is used to print a SESOIL or AT123D input file. The Print option can also be used to print a text file or the contents of the clipboard.

The File, Printer Setup option is used to select the default printer and the paper size and orientation. Specific options presented are determined by your printer.

5.9.1.9 Exit

Use the File, Exit menu to quit SEVIEW. This option should only be used when you have completed all of your modeling and SEVIEW data management tasks. Keep in mind that there is no need to quit SEVIEW to run SESOIL, AT123D or to use any other DOS or Windows programs.

5.9.2 Edit

The Edit command options are used when editing or searching text files. File Edit SESOIL AT123D MODFLOW Help

Undo Redo Cut Copy Paste Select All Goto Line Find Find Again 5.9.2.1 Undo

Undo reverses the last action performed on any text. If you repeatedly select Undo, your actions will be reversed all the way to the start of the current editing session. The <CONTROL + Z> short cut keys can also be used to execute the Undo command.

5.9.2.2 Redo

Redo restores the action previously reversed with the Undo command. The Redo command is the opposite of the Undo command. The Redo command is used if you change your mind after using the Undo command. If you repeatedly select Redo, your Undo actions will be restored in the order they were undone. The <CONTROL + R> short cut keys can also be used to execute the Redo command.

5.9.2.3 Cut

The Cut command removes selected text and places it in the Windows clipboard. The Cut command is used when you want to move text from one location to a new location.

The Paste command is used to insert the text. The <CONTROL + X> short cut keys can be used to execute the Cut command.

5.9.2.4 Copy

The Copy command places a duplicate copy of the selected text into the clipboard. The Copy command is used when you want to move copies of text and place it in a new location. The Paste command is used to insert the text. The <CONTROL + C> short cut keys can also be used to execute the Copy command.

5.9.2.5 Paste

The Paste command inserts a copy of the clipboard into the current file at the cursor location. To copy text to the clipboard, see the Cut and Copy commands above. The <CONTROL + V> short cut keys can also be used to execute the Paste command.

5.9.2.6 Select All

The Select All command highlights all text to be copied, cut or deleted.

5.9.2.7 Go to Line

The Go to Line command moves the cursor to the beginning of the selected line number.

5.9.2.8 Find

The Find command searches for text within the document. The <CONTROL + F> short cut keys can also be used to execute the Find command.

5.9.2.9 Find Again

The Find Again command repeats the last find. The <CONTROL + G> short cut keys can be used to execute the Find Again command.

5.9.3 MODFLOW

The MODFLOW command option is used to set parameters for the SESOIL to MODFLOW link.

File Edit SESOIL AT123D MODFLOW Help

This command is used to establish default parameters for the MODFLOW link. The link data is created whenever you print or preview a SESOIL Pollutant Report. A description of the parameters is presented in Section 8.