Sub-Module (FBBA) - overview
Overview of the FBBA sub-module.
Flexi Multiradio 10 BTS Outdoor Capacity Extension Sub-Module (FBBA) provides additional capacity to the BTS. One FBBA brings additional 576 CEs for WCDMA. HSPA performance is 756 Mbps for downlink and 157 Mbps for uplink. When dedicated for LTE (FDD or TDD), it supports capacity of 3x20 MHz (or 6x10 MHz) with MIMO enabling 450 Mbps downlink and 150 Mbps uplink data speeds.
Up to two FBBAs are supported per one Flexi Multiradio System Module.
9.5.2 Flexi Multiradio 10 BTS Outdoor Capacity Extension Sub-Module (FBBC) - overview
Overview of the FBBC sub-module.
FBBC is a high capacity extension sub-module for Flexi Multiradio 10 BTS (FSMF). It increases both baseband capacity and RF connectivity of Flexi Multiradio 10 BTS System Module. BTS equipped with two FBBC sub-modules provides up to twelve optical RP3-01 6 Gbit/s connections towards RF units.
FBBC provides the same baseband capacity as FBBA. Up to two FBBCs are supported per one Flexi Multiradio System Module.
9.5.3 Flexi Multiradio 10 BTS Indoor Capacity Extension Sub-Module (FBIH) - overview
Overview of the FBIH sub-module.
FBIH is a high capacity extension sub-module for Flexi Multiradio 10 BTS (indoor). It increases both baseband capacity and RF connectivity of Flexi Multiradio 10 BTS System Module. It supports capacity of 3x20 MHz 8T8R with beamforming.
9.5.4 Flexi Multiradio 10 BTS Transmission SubModule (FTIF) -overview
Overview of the FTIF sub-module.
Flexi Multiradio 10 BTS Transmission Sub-Module (FTIF) has eight E1/T1/JT1 interfaces and two Gigabit Ethernet Combo ports. Internal connections between the core module and FTIF go through an internal connector.
Flexi Multiradio 10 Base Station - modules Flexi Multiradio 10 Base Station Product Description
9.5.5 FlexiPacket FirstMile 200i (FPFM200i) - overview
Overview of the FlexiPacket FirstMile 200i unit.
FPFM200i is a Nokia FlexiPacket Microwave Radio indoor unit that is designed to fit the transport slot of Flexi Multiradio 10 Base Station System Module. The mechanical integration includes powering of the FPFM200i. The FPFM200i provides support in the Ethernet uplink and downlink traffic. It provides advanced Ethernet processing features, as well as maximum flexibility to support TDM traffic via circuit emulation.
The FPFM200i can be connected to Microwave Radio Outdoor units via a single Ethernet cable, using a copper Ethernet port with power feeding support. Alternatively, two cables can be used, in which case one of them is a separate power supply cable.
The FPFM200i can be configured, monitored, and administered by a web-based Local Craft Terminal (WebLCT) or NetViewer management tool. That can be done locally or remotely, via Data Communication Network (DCN).
For more information, see FlexiPacket FirstMile 200i documentation.
9.5.6 Flexi Multiradio 10 BTS Power Distribution Sub-Module (FPFD)
Overview of the FPFD sub-module.
The optional integrated outdoor Flexi Power Distribution Sub-Module (FPFD) is a size-optimized power distribution unit that has basic overvoltage protection (type approval level with 2 kV/1 kV). It is designed to be used for stacked configurations, but it can also be used for distributed BTS configurations in the same way as the existing Flexi BTS integrated power distribution sub-module with an optional FSEC or FSES.
It is installed inside an outdoor 3U casing, and internal connections between the core module and FPFD go through an internal connector. The FPFD provides four external 48 V DC outputs for Flexi Modules (RF Module, RRH, and extension System Module) or any standard 48 V DC device at the site. FPFD also powers the core module.
9.5.7 Flexi Power Distribution Module (FPFC) - overview
Overview of the FPFC module.
The optional Flexi Power Distribution Module (FPFC) is a stand-alone, general-purpose outdoor PDU module with Class II overvoltage protection with a 15 kA protection level. It feeds 48 V DC power to distributed Flexi RF Modules or Remote Radio Heads without an external protection unit (FSEC or FSES). It is a stand-alone external 19-inch wide 2U high outdoor module.
The FPFC provides six outputs for Flexi Modules (RF Modules, RRHs, and extension Flexi Multiradio 10 Base Station Product Description Flexi Multiradio 10 Base Station - modules
9.5.8 Flexi Power Module (FPMA) - overview
Overview of the FPMA module.
Flexi Power Module (FPMA) includes an AC connection box, DC cable set, and a support frame for the actual power sub-modules (FPAA and FPBB).
Two FPMA modules can be stacked to create larger configurations consisting of up to four FPAAs and four FPBBs.
9.5.9 Flexi Power AC/DC Sub-Module (FPAA) - overview
Overview of the FPAA module.
The main function of Flexi Power AC/DC Sub-Module (FPAA) is to provide the BTS modules with 48 V DC power from an AC supply. The FPMA can house up to four AC/DC rectifiers, each of them having an output power of 1 kW 55 V DC.
9.5.10 Flexi Power Battery Sub-Module (FPBB) - overview
Overview of the FPBA/B submodule.
Flexi Power Battery Sub-Module (FPBB) is a separate optional sub-module used together with the AC/DC Module (FPAA). The FPMA can house up to three battery sub-modules.
Each battery has an initial 3 Ah capacity. When the AC power mains is down on a Flexi BTS site, battery backup time is up to 30 minutes for a typical 1+1+1 configuration when three new FPBBs are in use.
9.5.11 Flexi Power DC/DC Module 24V (FPDA) - overview
Overview of the FPDA module.
The function of Flexi Power DC/DC Module 24 V (FPDA) is to generate BTS internal 48 V DC power from an external 24 V DC supply. The FPDA is a stand-alone 2 kW DC/DC converter with 2U height.
9.5.12 Flexi Power Rectifier (FPRx) - overview
Overview of the FPRx unit.
Flexi Power Rectifier (FPRx) is a modular 9 kW output power AC rectifier package made up of three individual 2 or 3 kW AC/DC power modules operating in a parallel mode configuration. The FPRx outputs a positive earthed -54 V DC (V48N) as a respective BTS operational supply voltage rail and for site battery charging. It supports Flexi BTS Multiradio configurations (indoor and outdoor cabinets, and stack, pole and wall configurations).
Flexi Multiradio 10 Base Station - modules Flexi Multiradio 10 Base Station Product Description
9.5.13 Flexi Cabinet for Outdoor (FCOA) - overview
Overview of the FCOA unit.
Flexi Cabinet for Outdoor (FCOA) is an optional sales item for new sites where a cabinet is needed. The multipurpose cabinet includes a lock and a door alarm switch that is connected to the System Module EAC connector. The outdoor cabinet can also be used in indoor locations where a locked cabinet for the BTS and other site equipment is needed. The FCOA provides IP65 weather protection.
9.5.14 Flexi Cabinet for Outdoor (FCOA) - optional elements
List of FCOA's optional elements.
The optional outdoor cabinet can include the following optional items:
• Outdoor Site Support Module (FCSA)
• Flexi Power Rectifier (FPRx)
• Air filter (FCFA)
• Fire detector (FCDA)
• EAC IP55 connection box (FSEB)
• OVP IP55 connection box (FSEC)
• OVP IP65 connection box (FSES)
w
NOTICE: FSEC is not supported in TD-LTE.9.5.15 Flexi Cabinet for Indoor (FCIA) - overview
Overview of the FCIA unit.
Flexi Cabinet for Indoor (FCIA) is an optional sales item for new indoor sites where a cabinet is needed.
9.5.16 Flexi Cabinet for Indoor (FCIA) - optional elements
List of FCIA's optional elements.
The optional indoor cabinet can include the following optional items:
• Flexi Power Rectifier (FPRx)
• Fire detector (FCDA)
• EAC IP55 connection box (FSEB)
• OVP IP55 connection box (FSEC)
Flexi Multiradio 10 Base Station Product Description Flexi Multiradio 10 Base Station - modules
9.5.17 Flexi Cabinet Outdoor (FCOS) - overview
Overview of the FCOS unit.
Flexi Cabinet Outdoor Small (FCOS) is an IP55-rated outdoor cabinet that provides space of 8U for installing IP20-rated units.
9.5.18 Flexi Cabinet Outdoor Small (FCOS) - installation options
List of FCOS installation options.
The following are installation options for Flexi Cabinet Outdoor Small (FCOS):
• Stand-alone floor installation
• On top of a Flexi BTS module stack
• Wall installation
• Pole installation
• Inside Flexi Cabinet for Outdoor (FCOA)
• 19-inch rack installation
9.5.19 Flexi Cabinet Outdoor (FCOB) - overview
Overview of the FCOB unit.
The FCOB provides IP55-protected installation space for Flexi Indoor System Module (FSIH/FBIH) and an optional GPS module. The FCOB enables installing indoor System Module variants in similar outdoor locations as Flexi outdoor modules. The FCOB provides space of 4U for installing IP20-rated units.
9.5.20 Flexi Cabinet Outdoor (FCOB) - installation options
List of FCOB installation options.
The following are installation options for Flexi Cabinet Outdoor (FCOB):
• Wall installation (using either side of FCOB, vertical installation only)
• Pole installation (using either side of FCOB, vertical installation only)
• Floor installation:
– stand-alone on the floor (either vertically or horizontally) – two FCOBs stacked (horizontal installation only)
– up to three 3U casings for earthquake Zone 4 or up to five 3U casings for earthquake Zone 2 stacked on top of FCOB (horizontal installation only) – FCOB installed on top of a 3U casing (horizontal installation only)
9.5.21 Flexi Mounting Kit for Floor, Wall and Pole (FMFA) -overview
Overview of the FMFA unit.
Flexi Multiradio 10 Base Station - modules Flexi Multiradio 10 Base Station Product Description
Flexi Mounting Kit for Floor, Wall and Pole (FMFA) is an optional item that is used for installing Flexi modules on the floor, wall, or pole.
9.5.22 Flexi System External Alarm (FSEB) - overview
Overview of the FSEB unit.
Flexi System External Alarm (FSEB) is used as an external alarm control (EAC). In indoor or stacked applications without a cabinet, the enclosure is attached in the
proximity of the modules, for example, on a wall. In outdoor applications, it is installed on the outdoor cabinet roof.
The FSEB enclosure provides an IP55 weather-protected space for external alarms and controls. Furthermore, it provides power for the fire detector (FCDA).
9.5.23 Flexi System External OVP (FSEC/FSES) - overview
Overview of the FSEC/FSES unit.
Flexi System External OVP (FSEC/FSES) protects Flexi Multiradio modules against surge pulse(s) in power feeding lines. It is also used for altering the DC cable diameter.