General setup

FINALISTA V Premio ACIPET a la Innovación “Petróleo y Energía: Desarrollo con Innovación” – Edificio 14x97, Bogotá – Acipet (November 2018). “Efecto de las

Nanopartículas en el Sistema de Gel Polimérico HPAM/Resorcinol/Formaldehído para el Control de Producción de Agua y Canalización en Procesos de Recobro Mejorado”.

Bibliography

[1]

E. J. Manrique, C. P. Thomas, R. Ravikiran, M. Izadi Kamouei, M. Lantz, J.

L. Romero, et al., "EOR: current status and opportunities," in SPE improved

oil recovery symposium, 2010.

[2]

K. Guo, H. Li, and Z. Yu, "In-situ heavy and extra-heavy oil recovery: A

review," Fuel, vol. 185, pp. 886-902, 2016.

[3]

G.-A. Maya-Toro, R.-H. Castro-García, Z. d. P. Pachón-Contreras, and J.-F.

Zapata-Arango, "Polymer gels for controlling water thief zones in injection

wells," CT&F-Ciencia, Tecnología y Futuro, vol. 5, pp. 37-44, 2012.

[4]

B. Bailey, M. Crabtree, J. Tyrie, J. Elphick, F. Kuchuk, C. Romano, et al.,

"Water control," Oilfield Review, vol. 12, pp. 30-51, 2000.

[5]

L. Altunina, V. Kuvshinov, and L. Stasieva, "Thermoreversible polymer gels

for enhanced oil recovery," Chem Sustainable Dev, vol. 19, p. 121e30, 2011.

[6]

H. He, Y. Wang, M. Zhao, L. Cheng, and P. Liu, "Laboratory evaluation of

thermoreversible gel for in-depth conformance control in steam-stimulated

wells," in SPE Heavy Oil Conference Canada, 2012.

[7]

L. Altunina, "Improved Cyclic-Steam Well Treatment With Employing

Thermoreversible Polymer Gels," in SPE Russian Oil and Gas Technical

Conference and Exhibition, 2006.

[8]

H. Jia, Q. Ren, Y. M. Li, and X. P. Ma, "Evaluation of polyacrylamide gels

with accelerator ammonium salts for water shutoff in ultralow temperature

reservoirs: Gelation performance and application recommendations,"

Petroleum, vol. 2, pp. 90-97, 3// 2016.

[9]

H. He, Y. Wang, J. Zhang, X. Xu, Y. Zhu, and S. Bai, "Comparison of Gelation

Behavior and Morphology of Resorcinol–Hexamethylenetetramine–HPAM

Gel in Bulk and Porous Media," Transport in Porous Media, vol. 109, pp. 377-

392, 2015.

[10]

F. Crespo, B. Reddy, C. A. Lewis, and L. S. Eoff, "Recent advances in

organically crosslinked conformance polymer systems," in SPE International

Symposium on Oilfield Chemistry, 2013.

[11]

P. Albonico, M. Bartosek, A. Malandrino, S. Bryant, and T. Lockhart, "Studies

on phenol-formaldehyde crosslinked polymer gels in bulk and in porous

media," in SPE International Symposium on Oilfield Chemistry, 1995.

[12]

G. A. Al-Muntasheri, H. A. Nasr-El-Din, J. Peters, and P. L. J. Zitha,

"Investigation of a high temperature organic water shutoff gel: reaction

88 Nanoparticles’ Effect on the Stability of Gel Systems

mechanisms," in SPE International Improved Oil Recovery Conference in

Asia Pacific, 2005.

[13]

A. Moradi-Araghi, "Application of low-toxicity crosslinking systems in

production of thermally stable gels," in SPE/DOE Improved Oil Recovery

Symposium, 1994.

[14]

S. Karimi, S. Kazemi, and N. Kazemi, "Syneresis measurement of the HPAM-

Cr (III) gel polymer at different conditions: An experimental investigation,"

Journal of Natural Gas Science and Engineering, vol. 34, pp. 1027-1033,

2016.

[15]

A. S. Kedir, J. G. Seland, A. Skauge, and T. Skauge, "Nanoparticles for

Enhanced Oil Recovery: Influence of pH on Aluminum-Cross-linked Partially

Hydrolyzed Polyacrylamide-Investigation by Rheology and NMR," Energy &

Fuels, vol. 28, pp. 2343-2351, 2014.

[16]

S. Karimi, F. Esmaeilzadeh, and D. Mowla, "Identification and selection of a

stable gel polymer to control or reduce water production in gas condensate

fields," Journal of Natural Gas Science and Engineering, vol. 21, pp. 940-

950, 2014.

[17]

R. D. Sydansk, Reservoir conformance improvement: Society of Petroleum

Engineers, 2011.

[18]

G. Cheraghian and L. Hendraningrat, "A review on applications of

nanotechnology in the enhanced oil recovery part B: effects of nanoparticles

on flooding," International Nano Letters, vol. 6, pp. 1-10, 2016.

[19]

A. Bera and H. Belhaj, "Application of nanotechnology by means of

nanoparticles and nanodispersions in oil recovery-A comprehensive review,"

Journal of Natural Gas Science and Engineering, vol. 34, pp. 1284-1309,

2016.

[20]

G. Cheraghian and L. Hendraningrat, "A review on applications of

nanotechnology in the enhanced oil recovery part A: effects of nanoparticles

on interfacial tension," International Nano Letters, vol. 6, pp. 129-138, 2016.

[21]

J. B. Crews and A. M. Gomaa, "Nanoparticle associated surfactant micellar

fluids: an alternative to crosslinked polymer systems," in SPE International

Oilfield Nanotechnology Conference and Exhibition, 2012.

[22]

C. Negin, S. Ali, and Q. Xie, "Application of nanotechnology for enhancing oil

recovery–A review," Petroleum, vol. 2, pp. 324-333, 2016.

[23]

K. Rankin and Q. Nguyen, "Conformance Control through In-situ Gelation of

Silica Nanoparticles," in Nanotech Conference & Expo, 2014, pp. 15-18.

[24]

N. Jayarambabu, S. Kumari, V. Rao, and Y. Prabhu, "Enhancement of

Growth In Maize By Biogenic-Synthesized Mgo Nanoparticles," International

Journal of Pure and Applied Zoology, 2016.

[25]

N. Ogolo, O. Olafuyi, and M. Onyekonwu, "Enhanced oil recovery using

nanoparticles," in SPE Saudi Arabia section technical symposium and

exhibition, 2012.

[26]

M. O. Onyekonwu and N. A. Ogolo, "Investigating the use of nanoparticles

in enhancing oil recovery," in Nigeria Annual international conference and

exhibition, 2010.

[27]

J. Hulla, S. Sahu, and A. Hayes, "Nanotechnology: History and future,"

Human & experimental toxicology, vol. 34, pp. 1318-1321, 2015.

[28]

R. P. Feynman, "There's plenty of room at the bottom," California Institute of

Technology, Engineering and Science magazine, 1960.

[29]

N. Taniguchi, Nanotechnology: integrated processing systems for ultra-

precision and ultra-fine products: Oxford University Press, USA, 1996.

[30]

R. Wahab, S. Ansari, M. Dar, Y. S. Kim, and H. S. Shin, "Synthesis of

magnesium oxide nanoparticles by sol-gel process," in Materials Science

Forum, 2007, pp. 983-986.

[31]

S. Ananda and N. M. M. Gowda, "Synthesis of chromium (III) oxide

nanoparticles by electrochemical method and Mukia maderaspatana plant

extract, characterization, KMnO4 decomposition and antibacterial study,"

Modern Research in Catalysis, vol. 2, p. 127, 2013.

[32]

R. Pekala, "Organic aerogels from the polycondensation of resorcinol with

formaldehyde," Journal of materials science, vol. 24, pp. 3221-3227, 1989.

[33]

R. Xu, Particle characterization: light scattering methods vol. 13: Springer

Science & Business Media, 2001.

[34]

K. N. Pham, D. Fullston, and K. Sagoe-Crentsil, "Surface charge modification

of nano-sized silica colloid," Australian Journal of Chemistry, vol. 60, pp. 662-

666, 2007.

[35]

G. Xu, J. Zhang, and G. Song, "Effect of complexation on the zeta potential

of silica powder," Powder technology, vol. 134, pp. 218-222, 2003.

[36]

A. Sze, D. Erickson, L. Ren, and D. Li, "Zeta-potential measurement using

the Smoluchowski equation and the slope of the current–time relationship in

electroosmotic flow," Journal of colloid and interface science, vol. 261, pp.

402-410, 2003.

[37]

S. Bhattacharjee, "DLS and zeta potential–what they are and what they are

not?," Journal of Controlled Release, vol. 235, pp. 337-351, 2016.

[38]

L. J. Giraldo, M. A. Giraldo, S. Llanos, G. Maya, R. D. Zabala, N. N. Nassar,

et al., "The effects of SiO2nanoparticles on the thermal stability and

rheological behavior of hydrolyzed polyacrylamide based polymeric

solutions," Journal of Petroleum Science and Engineering, vol. 159, pp. 841-

852, 2017.

[39]

G. Socrates, Infrared and Raman characteristic group frequencies, 2004.

[40]

M. Mehrali, S. T. Latibari, M. Mehrali, T. M. I. Mahlia, and H. S. C. Metselaar,

"Effect of carbon nanospheres on shape stabilization and thermal behavior

of phase change materials for thermal energy storage," Energy Conversion

and Management, vol. 88, pp. 206-213, 2014.

[41]

B. Bai, J. Zhou, and M. Yin, "A comprehensive review of polyacrylamide

polymer gels for conformance control," Petroleum Exploration and

Development, vol. 42, pp. 525-532, 2015.

[42]

G. A. Al-Muntasheri, H. A. Nasr-El-Din, and P. L. Zitha, "Gelation kinetics

and performance evaluation of an organically crosslinked gel at high

temperature and pressure," SPE Journal, vol. 13, pp. 337-345, 2008.

90 Nanoparticles’ Effect on the Stability of Gel Systems

[43]

S. L. Bryant, M. Bartosek, and T. P. Lockhart, "Laboratory evaluation of

phenol—formaldehyde/polymer gelants for high-temperature applications,"

Journal of petroleum Science and Engineering, vol. 17, pp. 197-209, 1997.

[44]

G. A. Al-Muntasheri, I. A. Hussein, H. A. Nasr-El-Din, and M. B. Amin,

"Viscoelastic properties of a high temperature cross-linked water shut-off

polymeric gel," Journal of Petroleum Science and Engineering, vol. 55, pp.

56-66, 2007.

[45]

H. Jia, W.-F. Pu, J.-Z. Zhao, and R. Liao, "Experimental investigation of the

novel phenol− formaldehyde cross-linking HPAM gel system: based on the

secondary cross-linking method of organic cross-linkers and its gelation

performance study after flowing through porous media," Energy & Fuels, vol.

25, pp. 727-736, 2011.

[46]

R. D. Sydansk and P. A. Argabright, "Conformance improvement in a

subterranean hydrocarbon-bearing formation using a crosslinked polymer,"

ed: Google Patents, 1988.

[47]

S. L. Bryant, M. Rabaioli, and T. P. Lockhart, "Influence of syneresis on

permeability reduction by polymer gels," SPE Production & Facilities, vol. 11,

pp. 209-215, 1996.

[48]

R. Seright, "Washout of Cr (III)-Acetate-HPAM Gels from Fractures," in

International Symposium on Oilfield Chemistry, 2003.

[49]

I. Lakatos, J. Lakatos-Szabo, G. Szentes, A. Vago, Z. Karaffa, and T. Bodi,

"New alternatives in conformance control: nanosilica and liquid polymer

aided silicate technology," in SPE European Formation Damage Conference

and Exhibition, 2015.

[50]

R. Kalgaonkar, V. Wagle, K. Alnoaimi, and I. Alhussain, "Novel Compositions

Based on Nanomaterials Designed for Use as Conformance Sealants," in

SPE Abu Dhabi International Petroleum Exhibition & Conference, 2017.

[51]

R. S. Seright, A. Campbell, P. Mozley, and P. Han, "Stability of partially

hydrolyzed polyacrylamides at elevated temperatures in the absence of

divalent cations," Spe Journal, vol. 15, pp. 341-348, 2010.

[52]

G. Muller, J. Fenyo, and E. Selegny, "High molecular weight hydrolyzed

polyacrylamides. III. Effect of temperature on chemical stability," Journal of

Applied Polymer Science, vol. 25, pp. 627-633, 1980.

[53]

J. Kenkel, Analytical chemistry for technicians: CRC Press, 2010.

[54]

A. Moradi-Araghi and P. H. Doe, "Hydrolysis and precipitation of

polyacrylamides in hard brines at elevated temperatures," SPE reservoir

Engineering, vol. 2, pp. 189-198, 1987.

[55]

R. API, "63, Recommended Practices for Evaluation of Polymers Used in

Enhanced Oil Recovery Operations. 1990," Washington, DC: API, vol. 63.

[56]

T. Dang, Z. Chen, T. Nguyen, W. Bae, T. Chung, and T. Tu, "The

development and optimization of a polymer conformance control technology

in mature reservoirs: Laboratory experiments vs. Field scale simulation,"

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,

vol. 36, pp. 1219-1233, 2014.

[57]

F. Cortés, M. Lozano, O. Santamaria, S. Betancur Marquez, K. Zapata, N.

Ospina, et al., "Development and Evaluation of Surfactant Nanocapsules for

Chemical Enhanced Oil Recovery (EOR) Applications," Molecules, vol. 23,

p. 1523, 2018.

[58]

G. A. Maya, R. H. Castro, J. Sandoval, Z. Pachon, R. Jimenez, K. T. Pinto,

et al., "Successful Polymer Gels Application in a Highly Channeled

Peripheral Injection Well: Tello Field Pilot," in SPE Latin America and

Caribbean Petroleum Engineering Conference, 2014.

[59]

F. A. Miller and C. H. Wilkins, "Infrared spectra and characteristic frequencies

of inorganic ions," Analytical chemistry, vol. 24, pp. 1253-1294, 1952.

[60]

C. A. Franco, F. B. Cortés, and N. N. Nassar, "Adsorptive removal of oil spill

from oil-in-fresh water emulsions by hydrophobic alumina nanoparticles

functionalized with petroleum vacuum residue," Journal of colloid and

interface science, vol. 425, pp. 168-177, 2014.

[61]

F. Farzaneh, "Synthesis and characterization of Cr2O3 nanoparticles with

triethanolamine in water under microwave irradiation," Journal of Sciences,

Islamic Republic of Iran, vol. 22, pp. 329-333, 2011.

[62]

A. Rabiee, M. E. Zeynali, and H. Baharvand, "Synthesis of high molecular

weight partially hydrolyzed polyacrylamide and investigation on its

properties," Iranian Polymer Journal, vol. 14, p. 603, 2005.

[63]

H. A. Barnes, "Linear Viscoelasticty and Time Effects," in A Handbook of

Elementary Rheology, C. Printers, Ed., ed University of Wales Aberystwyth,

Penglais, Aberystwyth, Dyfed, Wales: The University of Wales Institute of

Non-Newtonian Fluid Mechanics, Department of Mathematics., 2000.

[64]

T. A. Witten, "Structured fluids," Physics today, vol. 43, pp. 21-28, 1990.

[65]

C. A. Grattoni, H. H. Al-Sharji, C. Yang, A. H. Muggeridge, and R. W.

Zimmerman, "Rheology and permeability of crosslinked polyacrylamide gel,"

Journal of colloid and interface science, vol. 240, pp. 601-607, 2001.

[66]

J. Liu and R. Seright, "Rheology of gels used for conformance control in

fractures," SPE Journal, vol. 6, pp. 120-125, 2001.

[67]

L. J. Giraldo, M. A. Giraldo, S. Llanos, G. Maya, R. D. Zabala, N. N. Nassar,

et al., "The effects of SiO2 nanoparticles on the thermal stability and

rheological behavior of hydrolyzed polyacrylamide based polymeric

solutions," Journal of Petroleum Science and Engineering, vol. 159, pp. 841-

852, 2017.

[68]

V. Hackley, P. Somasundaran, and J. Lewis, Polymers in particulate

systems: properties and applications vol. 104: CRC Press, 2001.

[69]

N. Nguyen, T. Tu, W. Bae, C. Dang, T. Chung, and H. Nguyen, "Gelation

time optimization for an HPAM/chromium acetate system: The successful

key of conformance control technology," Energy Sources, Part A: Recovery,

Utilization, and Environmental Effects, vol. 34, pp. 1305-1317, 2012.

[70]

L. Ma, S. Wang, Y. Long, C. Zhu, H. Yang, T. Yang, et al., "Novel

Environmentally Benign Hydrogel: Nano-Silica Hybrid Hydrolyzed

Polyacrylamide/Polyethyleneimine

Gel

System

for

Conformance

92 Nanoparticles’ Effect on the Stability of Gel Systems

Improvement in High Temperature High Salinity Reservoir," in SPE Abu

Dhabi International Petroleum Exhibition & Conference, 2017.

[71]

Z. A. Dijvejin, A. Ghaffarkhah, S. Sadeghnejad, and M. V. Sefti, "Effect of

silica nanoparticle size on the mechanical strength and wellbore plugging

performance of SPAM/chromium (III) acetate nanocomposite gels," Polymer

Journal, p. 1, 2019.

[72]

A. S. G. Magalhães, M. P. A. Neto, M. N. Bezerra, N. M. P. S. Ricardo, and

J. P. A. Feitosa, "Application of ftir in the determination of acrylate content in

poly(sodium acrylate-CO-acrylamide) superabsorbent hydrogels," Quimica

Nova, vol. 35, pp. 1464-1467, 2012.

[73]

G. Craciun, D. Ighigeanu, E. Manaila, and M. D. Stelescu, "Synthesis and

Characterization of Poly(Acrylamide-Co-Acrylic Acid) Flocculant Obtained by

Electron Beam Irradiation," Materials Research, vol. 18, pp. 984-993, 2015.

[74]

G. Huacai, P. Wan, and L. Dengke, "Graft copolymerization of chitosan with

acrylic acid under microwave irradiation and its water absorbency,"

Carbohydrate Polymers, vol. 66, pp. 372-378, 2006.

[75]

S. Nuno-Donlucas, A. Rhoton, S. Corona-Galvan, J. Puig, and E. Kaler,

"Emulsion copolymerization of styrene and sodium acrylate," Polymer

Bulletin, vol. 30, pp. 207-214, 1993.

[76]

N. Sarkar, "Kinetics of thermal gelation of methylcellulose and

hydroxypropylmethylcellulose

in

aqueous

solutions,"

Carbohydrate

Polymers, vol. 26, pp. 195-203, 1995.

[77]

C.

Carotenuto

and

N.

Grizzuti,

"Thermoreversible

gelation

of

hydroxypropylcellulose aqueous solutions," Rheologica acta, vol. 45, pp.

468-473, 2006.

[78]

L. Altunina, V. Kuvshinov, and L. Stasyeva, "Thermoreversible polymer gels

for increased efficiency of cyclic-steam well treatment," in 68th EAGE

Conference and Exhibition incorporating SPE EUROPEC 2006, 2006.

[79]

C. Yanbin, L. Dongqing, Z. Zhang, W. Shantang, W. Quan, and X. Daohong,

"Steam channeling control in the steam flooding of super heavy oil reservoirs,

Shengli Oilfield," Petroleum Exploration and Development, vol. 39, pp. 785-

790, 2012.

[80]

J. Sarkar, M. M. R. Mollick, D. Chattopadhyay, and K. Acharya, "An eco-

friendly route of γ-Fe 2 O 3 nanoparticles formation and investigation of the

mechanical properties of the HPMC-γ-Fe 2 O 3 nanocomposites,"

Bioprocess and biosystems engineering, vol. 40, pp. 351-359, 2017.

[81]

S. C. Joshi, "Sol-gel behavior of hydroxypropyl methylcellulose (HPMC) in

ionic media including drug release," Materials, vol. 4, pp. 1861-1905, 2011.

[82]

Y. J. Yoo and I. C. Um, "Examination of thermo-gelation behavior of HPMC

and HEMC aqueous solutions using rheology," Korea-Australia Rheology

Journal, vol. 25, pp. 67-75, 2013.

[83]

C. Carotenuto and M. Minale, "On the use of rough geometries in rheometry,"

Journal of Non-Newtonian Fluid Mechanics, vol. 198, pp. 39-47, 2013.

In document ST70+ User Reference Manual. Document reference: Date: January 2009 (Page 55-58)