This section describes how to install the U-Net main program. You can install the U-Net main program through an automatic installation wizard. The wizard helps you successfully install the U-Net. During the installation, the system automatically displays prompt dialog boxes. 2.3 Installing a License
This section describes how to install a license. The operation rights on the U-Net are controlled by a license. You need to load a valid license to ensure that the U-Net runs properly.
2.4 Starting the U-Net
You can start the U-Net software through the Start menu or the shortcut icon on the desktop. If the prompted message indicates that no license file is loaded, load the license file as prompted. 2.5 Uninstalling the U-Net Main Program
2.1 Preparation for the Installation
Before installing the U-Net software, you need to ensure that the installation conditions are met. For example, you need to ensure that the U-Net software package is prepared, the environment components are installed, and the configuration of the PC meets the requirements.
Hardware Requirements
Table 2-1 lists the hardware requirements of the PC. Table 2-1 Hardware requirements
Config uration Item
Recommended Configuration Minimum Configuration
CPU Intel dual-core 2.0 GHz P3 1GHz
Memor y 2 GB 512 MB Hard Disk 15 GB at least 1 GB at least
Monitor 1280 x 1024 resolution 1024 x 768 resolution
Miscell aneous
DVD-ROM drive, mouse, and keyboard
DVD-ROM drive, mouse, and keyboard
Software Requirements
Table 2-2 lists the software requirements of the PC. Table 2-2 Software requirements
Configurati
on Item How to Obtain RecommendedConfiguration Remarks Operating system (OS) - Microsoft Windows XP Professional SP2 or higher Mandatory Environment components - l Microsoft .NET Framework4.0 or higher l Microsoft Windows Installer3.1 or higher Mandatory Operating software - Microsoft Office 2003 or higher Mandatory
Configurati
on Item How to Obtain RecommendedConfiguration Remarks GENEX U-
Net software installation package
l Download the software package from http:// support.huawei.com. l Obtain the GENEX U-
Net installation DVD- ROM.
l You have a user account at http://
support.huawei.com and have the permission to download the GENEX U- Net software installation package.
l You have obtained the GENEX U-Net software.
Mandatory
License Contact Huawei technical support engineers to obtain the license.
- Mandatory
2.2 Installing the U-Net Main Program
This section describes how to install the U-Net main program. You can install the U-Net main program through an automatic installation wizard. The wizard helps you successfully install the U-Net. During the installation, the system automatically displays prompt dialog boxes.
Prerequisites
NOTE
l The U-Net installation program is ready. The PC meets the installation requirements. For details, see 2.1 Preparation for the Installation.
l You have logged in to the operating system by using an administrator account because the U-Net software must be installed by using an administrator account.
Context
The support website of Huawei provides the U-Net installation package. The installation package is classified into four types.
l If you use a 32-bit OS and have installed a plug-in whose version is equal to or later than Microsoft .NET Framework 4.0, select Huawei.UNet32 (exclude framework). Otherwise, select Huawei.UNet32.
l If you use a 64-bit OS and have installed a plug-in whose version is equal to or later than Microsoft .NET Framework 4.0, select Huawei.UNet64 (exclude framework). Otherwise, select Huawei.UNet64.
Before installing the U-Net main program, you are advised to close all the running programs to ensure successful installation of the U-Net main program.
This section takes a 32-bit operating system as an example to describe the installation procedure of the U-Net.
Procedure
Step 1 Download the installation package at the support website of Huawei.
Read the background information carefully and download the correct installation package. Step 2 Double-click Huawei.UNet32.exe to display the setup wizard.
Step 3 Click Next.
Step 4 In the confirmation dialog box, select I accept the terms of the License Agreement. Step 5 Click Next.
Step 6 In the user information dialog box, enter the User Name and Company Name. Step 7 Click Next.
Step 8 In the displayed dialog box, select the required feature components. Step 9 Click Next.
Step 10 In the displayed dialog box, click Browse to set the installation path. Step 11 After confirmation, click Install.
If you want to... Then...
Display the Installer setup wizard Follow the prompts to install the software.
After the installation is complete, it is recommended that you restart the PC. Then, perform Step 13 to check whether the U-Net is installed successfully. Display the .NET Framework
setup wizard
Follow the prompts to install the software.
Step 12 After the installation is complete, click Finish.
Step 13 Check whether the U-Net main program is installed successfully.
Choose Start > All Programs > Huawei GENEX > U-Net 3.8 to check whether the information about the U-Net software exists.
If... Then...
The U-Net software information exists The U-Net main program is successfully installed.
The U-Net software information does not exist
Repeat Step 1 through Step 13 until the U-Net main program is successfully installed.
Table 2-3 describes the structure of the U-Net installation folder generated after the U-Net main program is installed.
Table 2-3 U-Net installation folder structure Directory Description
Adjust Saves rectification parameters for the radio propagation model. Antenna Saves antenna data.
config Saves the configuration file.
CoMP Saves the configuration parameters of the CoMP gain. IRC Saves the configuration parameters of the IRC gain.
iScript Saves the environment configuration parameters for the Java Virtual Machine (JVM).
Measure Report
Saves the configuration parameters for geographic display of MR data. Data Saves the default configuration parameters of the project.
Gis Saves the default configuration parameters of the GIS. NbrPlanning Saves various parameter templates for neighbor cell planning. License Saves the license file.
Prediction Saves the default configuration parameters of the prediction.
Propagation Saves the default configuration parameters of the propagation model. RF Saves the parameter template for LTE Cell planning.
RuleStore Saves the environment configuration parameters for the Java Virtual Machine (JVM).
Simulation Saves the default configuration parameters of the capacity simulation. ToolInfo Saves the interface configuration information for domain verification. TSCPlannin
g
Saves the parameter template information for TSC planning. NetEntity Saves the related network information.
Network Expansion
Saves the parameters for six-sector expansion of UMTS. Help Saves the Help files of the U-Net.
Resource Saves the template files required by the U-Net. Resources Saves the resource files required by the U-Net.
Log Saves operation logs. NOTE
The two folders are generated only after the U-Net software runs.
Temp Saves the calculation results of path loss, prediction, and capacity simulation.
----End