2. DOMAIN CONTROLLER INSTALLATION
2.9 Installing the Honeywell Domain Controller package
The Experion LX R110 Domain Controller Security package must be installed on the Domain Controller for a process control network before migrating to Experion LX R110 or installing a new Experion LX system. Experion LX also supports installation of FTE on the Domain Controller in some circumstances.
These instructions apply to single Domain Controllers, peer Domain Controllers, and Windows Server 2008 read only Domain Controllers (RODC).
ATTENTION
The Domain Controller should be up-to-date with the latest updates from Microsoft before proceeding with the following instructions.
Domain Controller Security on Windows Server 2003/ 2008/ 2008 R2
Follow this procedure if the only Experion LX support to be installed on the Domain
Controller is the Experion LX Domain Controller Security package. This procedure
works for a fresh install on Windows Server 2003, Windows Server 2008, or Windows
Server 2008 R2. If your Domain Controller is Windows Server 2008, and you want to
install FTE on your Domain Controller, follow the procedure in Install Domain Security
and Optional Components (FTE) on Windows Server 2008.
2. Domain Controller Installation
2.9. Installing the Honeywell Domain Controller package
Step Action
1 Log on to the Domain Controller as a domain administrator.
2 Browse to the PACKAGES\DCSECURITY on the Installation media or the ESIS share.
3 Double-click Honeywell Security Model-Domain Controller.msi.
ATTENTION
The Open File – Security Warning dialog box may appear indicating that the publisher of the software could not be identified. Click Run to continue with the installation.
4 If a User Account Control dialog box appears, click Continue.
5 On the Welcome to the InstallShield Wizard screen, click Next.
6 Read the EULA and select I accept the terms in the license agreement option.
7 Click Next.
8 If the DcsComserver Password dialog appears, choose a password for this domain server account, type it into both fields on the dialog, and click Next.
9 On the Setup Type dialog, normally leave the default selection of Complete, and click Next.
10 If the Link Policies to the Domain or an Organizational Unit dialog appears, normally leave the default selection of Install policies at the Domain level, and click Next.
11 On the Ready to Install page, click Install.
12 Wait for the installation to complete, and on the InstallShield Wizard Completed page, click Finish.
No restart is necessary after this procedure.
Propagation of the domain policies installed by this procedure is not immediate. It occurs
as each computer is restarted, after the default update interval, or when a manual update
is performed using gpupdate.
2. Domain Controller Installation 2.9. Installing the Honeywell Domain Controller package
Install domain security, optional components on Windows server 2008
Use this procedure only if you plan to install Experion LX optional components (FTE) on a Windows Server 2008 Domain Controller. Do not use this procedure on Windows Server 2003 or Windows Server 2008 R2 since Experion LX FTE is not supported on Windows Server 2003 and Windows Server 2008 R2.
.NET Installation procedure
Perform the following steps to install .NET. If it is already installed, proceed with Domain Controller Security and Optional Component Installation procedure.
To install .NET on a Windows Server 2003/Windows Server 2008 operating system
Step Action
1 Log on to the Domain Controller as a domain administrator.
2 Browse to DotNet3.5 on the installation media or ESIS share (for example,
\D_EXP\PACKAGES\Microsoft\DotNet3.5), depending on the type of installation.
3 Double-click the dotnetfx35sp1 file.
The .NET files are extracted.
4 Read the End-User License Agreement (EULA) on the Welcome to Setup dialog box and select I have read and ACCEPT the terms in the License Agreement.
5 Click Install.
6 When the installation is complete, the Microsoft .Net Framework 3.5.1 has been installed successfully dialog box appears. Click Exit.
To install .NET on a Windows Server 2008 R2 operating system
Step Action
1 Log on to the Domain Controller as a domain administrator.
2 Click Start > Administrative Tools > Server Manager.
3 In the Server Manager interface, click Features to see the list of all the installed Features in the right hand pane.
4 Select Add Features to display a list of features.
2. Domain Controller Installation
2.9. Installing the Honeywell Domain Controller package
Step Action
5 Expand .NET Framework 3.5.1 Features. Two check boxes are displayed.
• .NET Framework 3.5.1
• WCF Activation
6 If it is not already selected, select .NET Framework 3.5.1 and click Next.
ATTENTION
If you do not expand .NET Framework 3.5.1 Features and select .NET
Framework 3.5.1, the Add Features Wizard dialog-box appears. Click Cancel, expand .NET Framework 3.5.1 Features and then select .NET Framework 3.5.1 Features.7 In the Confirm Installation Selections interface, review the selections and then click Install.
8 When the installation is complete, the Microsoft .Net Framework 3.5.1 has been installed successfully dialog box appears.
9 Click Exit.
Domain Controller Security and Optional Component Installation
ATTENTION
If you are installing a new Domain and Domain Controller, you must manually install optional packages from the Experion LX R110 Installation media.
Step Action
1 Log on to the Domain Controller as a domain administrator.
2 Browse to the \Packages\FTEDriver path and double-click the file honeywell fte mux driver.msi.
3 Select Allow if a Microsoft User Account Control (permissions dialog box) appears.
4 On the Welcome to the InstallShield Wizard screen, click Next.
5 Read the End-User License Agreement (EULA) and select I accept the terms in the license agreement.
6 Click Next.
2. Domain Controller Installation 2.9. Installing the Honeywell Domain Controller package
Step Action
7 Review the summary of the settings you have selected in the install dialog boxes and click Install.
8 Wait for the installation to complete, and on the InstallShield Wizard Completed page, click Finish.
Propagation of the domain policies installed by this procedure is not immediate. It occurs as each computer is restarted, after the default update interval, or when a manual update is performed using gpupdate.
If you installed FTE on the Domain Controller, FTE configuration must now be
performed as described in refer to the Experion LX FTE Overview and Implementation
Guide.
2. Domain Controller Installation
2.9. Installing the Honeywell Domain Controller package
In document
Windows Domain/Workgroup
(Page 43-49)