Before You Begin
Task 2. Installing the Licensed Programs
If you have secondary logical partitions, you must perform this procedure on each partition to which you want to install the licensed programs.
__ 1. Begin at the iSeries Main Menu.
Do the following to put the system in a restricted state and filter the messages that appear:
a. Type: CHGMSGQ QSYSOPR *BREAK SEV(60) Press Enter.
b. A message display could appear. Press Enter.
c. Type: ENDSBS *ALL *IMMED Press Enter.
d. When the following message appears, press Enter to continue:
ENDSBS SBS(*ALL) command being processed
e. The message System ended to restricted condition appears. Press Enter to continue.
f. Type: CHGMSGQ QSYSOPR SEV(95) Press Enter.
g. A message display could appear. Press Enter.
__ 2. When the iSeries Main Menu appears, load the media volume that contains optionally installable parts of OS/400. For optical media, this volume has the label B29xx_02, where 29xx indicates the primary language of the server.
__ 3. Type: GO LICPGM, and press Enter.
__ 4. The Work with Licensed Programs display appears.
LICPGM Work with Licensed Programs
System: XXXX Select one of the following:
Manual Install 1. Install all Preparation
5. Prepare for install Licensed Programs
10. Display installed licensed programs 11. Install licensed programs 12. Delete licensed programs 13. Save licensed programs
Type 11 (option 11. Install licensed programs), and press Enter. Please read the note below for an alternative to using option 11.
Note: If you want to install all licensed programs that are on the
distribution media, use Manual Install option 1,Install all, instead of using option 11. (See the Work with Licensed Programs display in the example above.) This will save time for the installation. Or, if you want most of the licensed programs on the media, then Manual Install option 1 is also the preferred choice. If you want most of the licensed programs and choose this method of installation, you will have to delete the extra unwanted licensed programs. TheManual Install display appears after selecting Manual Install option 1.
Select option 2 (2=All products) on this display to install all of the licensed programs on the media. Then, continue with step 8 on page 47 of these instructions.
For more information about using Manual Install option 1, refer to
“Using Option 1. Install All” on page 107.
__ 5. The Install Licensed Programs display appears.
Page through the display to find the licensed programs you want. Type a1 in the option column next to the licensed programs that you want to install.
Install Licensed Programs
System: XXXX Type options, press Enter.
1=Install
Licensed Product
Option Program Option Description _ _______ _______
_ 5722SS1 OS/400 - Library QGPL
_ 5722SS1 OS/400 - Library QUSRSYS
_ 5722SS1 1 OS/400 - Extended Base Support _ 5722SS1 2 OS/400 - Online Information
_ 5722SS1 3 OS/400 - Extended Base Directory Support _ 5722SS1 4 OS/400 - S/36 and S/38 Migration _ 5722SS1 5 OS/400 - System/36 Environment _ 5722SS1 6 OS/400 - System/38 Environment _ 5722SS1 7 OS/400 - Example Tools Library _ 5722SS1 8 OS/400 - AFP Compatibility Fonts _ 5722SS1 9 OS/400 - *PRV CL Compiler Support _ 5722SS1 11 OS/400 - S/36 Migration Assistant
More...
F3=Exit F11=Display status/release F12=Cancel F19=Display trademarks
Notes:
a. The libraries QGPL and QUSRSYS, and Extended Base Support (option 1) and Extended Base Directory Support (option 3) may be preselected.
If you are adding additional (new) licensed programs or optional parts, these items may be installed already. They would be preselected only if they are in an error state.
b. A licensed program that you want to install might not appear on the Install Licensed Programs display. If a licensed program does not appear, you can add it by entering information into the blank fields at the top of the list. This product then appears on the list with the other products, after you press Enter.
v Type 1 in the Option column
v Type the product identifier in the Licensed Program column v Type the product option value in the Product Option column v Press Enter
When you are typing the product option, the system accepts only the following three values: *BASE, option number, or *ALL.
v A value of *BASE will install only the base product of the associated product identifier.
v The product option number will install only the particular option of the associated product identifier. To be able to install options, you must install the base product (*BASE).
v A value of *ALL will install the base product and all options of the associated product identifier.
Keep in mind that the licensed programs that you add will appear on the list with only the product identifier. They will not list a descriptive name for the product. Also, you should check the documentation that came with the product to see whether there are any special instructions.
Press Enter.
__ 6. The Confirm Install of Licensed Programs display appears on the console.
Press Enter to confirm your choices.
__ 7. The Install Options display appears.
Install Options
System: XXXX Type choices, press Enter.
Installation device . . . OPT01 Name
Objects to install . . . . 1 1=Programs and language objects 2=Programs
3=Language objects Automatic IPL . . . . N Y=Yes
N=No
Type the following:
Installation device OPT01 (See note) Objects to install 1
Automatic IPL N Press Enter.
Note: In this example, OPT01 is used for the installation device. If you use a different naming convention, type the name that you have
assigned to the installation device.
__ 8. One or both of the following displays show the status of the licensed programs and language objects as they install on the server. You do not need to respond to these status displays.
Installing Licensed Programs
System: XXXX
Licensed programs processed . . . : 0 of XXX Licensed program install in progress
The following display is an example of the display that appears during the installation process.
Installing Licensed Programs
System: XXXX Licensed programs processed . . . : X of XXX
Licensed
Program Option Description Type
5722SS1 12 OS/400 - Host Servers 2924
Note: This display shows which licensed programs and optional parts of licensed programs are being installed. After the *PGM objects and
*LNG objects for each licensed program or optional part have been installed, the licensed program identifier disappears from the display and the number in the licensed programs processed field changes to show how many are processed.
__ 9. You will see the Display Messages display. Load the next media volume that contains licensed program products. If you are installing from optical media, wait for the In Use indicator to go out before responding to the message.
Display Messages
System: XXXX Queue . . . : QSYSOPR Program . . . . : *DSPMSG
Library . . . : QSYS Library . . . :
Severity . . . . : 95 Delivery . . . : *BREAK Type reply (if required), press Enter.
Load the next volume in optical device OPT01 (X G) Reply . . . . G
Type G, and press Enter.
Note:
v After you load each volume, type G and press Enter.
v If there are no more volumes to load or if you want to end the loading process, typeX and press Enter.
__ 10. The Work with Licensed Programs display appears on your console when the installation process is complete. One of the following messages appears on the bottom of the Work with Licensed Programs display:
Work with licensed programs function not complete. Go to
“Appendix A. Recovery Procedures” on page 95 to determine the problem.
Work with licensed programs function has completed. Continue with the next step.
__ 11. Verify your licensed programs’ installed status values and check for
compatibility. It is important to make sure all of your licensed programs are compatible with the operating system. You can determine a licensed
program’s compatibility by checking the installed status value.
Use LICPGM menu option 10, Display licensed programs, to see the release and installed status values of the installed licensed programs. If the
installed status value of a licensed program is *COMPATIBLE, it is ready for use. If the installed status value of a licensed program is *BACKLEVEL, the licensed program is installed, but its version, release, and modification is not compatible with the currently installed level of the OS/400 operating system. Check “Licensed Product Table” on page 149 to verify the current version, release, and modification of the licensed program. “Installed status values” on page 147 lists the possible installed status value descriptions.
More... You have completed this task. Do you need to install additional licensed programs?
No Yes
↓ Go to “Chapter 9. Installing Additional Licensed Programs” on page 75 and complete the instructions there.
Do you need to install a secondary language?
No Yes
↓ Go to “Chapter 10. Installing a Secondary Language” on page 83 and complete the instructions there.
You must complete the installation process before putting your system into operation.
Go to “Chapter 11. Checklist for Completing the Installation” on page 89 and complete the instructions there.