The i-MID shows the odometer, trip meter, outside temperature indicator, and other gauges.
It also displays important messages such as warnings and other helpful information.
■Main displays
Press the (display/information) button to change the display.
■Switching the Display
1Switching the Display
To change the item displayed on the fuel consumption screen:
1. Press and hold the button until the item blinks.
2. Press the button to select an item while the item is blinking for about six seconds.
The display is fixed when the time elapses and blinking stops. 123456 Genre AAA Song AAA Artist AAA 200 200 1h 30m Elapsed Time 1h 30m Elapsed Time 24.0 24.0 40mph Average Speed 40mph
Average Speed Range 200miles
123456 123456 123456 123456 123456 123456 123456 123456 123456 123456 (Display/ Information) Button
Audio/HFL display Fuel consumption
Blank screen
Full size analogue clock/ Wallpaper 2.4 ℓ models Power monitor 1.8 ℓ models 2.4 ℓ models Fuel consumption Range Elapsed time
Average speed Elapsed time
Average speed
Average fuel
Range
Press . Press and hold
Continued 87
uuGauges and Displaysuintelligent Multi-Information Display (i-MID)*
In strum e nt Pa nel ■Trip computer
Press the (Select/Reset) knob to change the display.
Shows the total number of miles or kilometers that your vehicle has accumulated.
Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.
■Resetting a trip meter
To reset a trip meter, display it, then press and hold the knob. The trip meter is reset to 0.0.
■Odometer
■Trip Meter
123.4 A B 12.3 123456 123456 123456 B24.0 30 40 40 Odometer Outside temperature Trip A Trip B (Select/ Reset) Knob 1Trip MeterSwitch between trip meter A and trip meter B by pressing the knob, or by using the customized features on the i-MID.
uuGauges and Displaysuintelligent Multi-Information Display (i-MID)* In strum e nt Pa nel
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.
Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your previous trips.
Shows the time elapsed since Trip A or Trip B was reset.
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
Shows the remaining oil life and Maintenance MinderTM. 2Maintenance MinderTM P. 353
■Average Fuel Economy
■Range
■Elapsed Time
■Average Speed
■Engine Oil Life
1Average Fuel Economy
You can change when to reset the average fuel economy.
2Customized Features P. 90
You can choose an item to be displayed in the fuel consumption screen. Average fuel economy, range, elapsed time, or average speed can be selected.
2Customized Features P. 90
2Switching the Display P. 86
2.4 ℓ engine models
1Range
You can choose an item to be displayed in the fuel consumption screen. Range, elapsed time, or average speed can be selected.
2Customized Features P. 90
2Switching the Display P. 86
Continued 89
uuGauges and Displaysuintelligent Multi-Information Display (i-MID)*
In
strum
e
nt Pa
nel
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada). ■Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading seems incorrect.
Use the i-MID’s customized features to correct the temperature. 2Customized Features P. 90
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
Engine horsepower usage while driving is displayed in the power monitor.
100% indicates that horsepower is at its maximum.
Shows you turn-by-turn driving directions to your destination linked with the navigation system.
2Refer to the Navigation System Manual
■Outside Temperature
■Instant Fuel Economy
*■Power Monitor
*1Outside Temperature
The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be updated after the temperature reading has stabilized.
1Power Monitor*
Engine horsepower is affected by external conditions such as driving conditions, or vehicle condition. The power monitor can compensate for some of these variables, but different readings may be displayed.
■Turn-by-Turn Directions
* 1Turn-by-Turn Directions*You can select whether the turn-by-turn display comes on during the route guidance.
2Customized Features P. 90
uuGauges and Displaysuintelligent Multi-Information Display (i-MID)* In strum e nt Pa nel
Use the i-MID to customize certain features. ■How to customize
Select the Vehicle Menu screen by pressing the MENU button while the ignition switch is in ON (w*1, and the vehicle is at a complete stop. Select Customize Settings, then press the SOURCE button.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an