NOTE This command is only supported by Layer 3 switches.
Use show ip pim-sm routing command to display current PIM-SM routing table entries. Commands
show ip pim-sm Syntax
Description
show Show running system information ip Display IP information
pim-sm Display PIM-SM information routing Display routing entries Defaults N/A
Command Modes
Privileged EXEC/ User EXEC Usage
Guidelines N/A
Examples ICS-G7852A-4XG# show ip pim-sm routing PIM-SM Routing
Multicast | Source | RP Address | VID | Left time | Downstream Group Address | Address | | | (Second) | Interface VID ======================================================================= 0.0.0.0 * 0.0.0.0 local - NULL 232.0.0.1 172.20.2.1 0.0.0.0 20 38s 100 200 10 0 232.0.0.1 * 0.0.0.0 local - NULL 232.0.0.2 172.20.2.1 0.0.0.0 20 48s 100 200 10 0 Error messages N/A
Related commands ip pim-sm no ip pim-sm ip pim-sm dr-priority ip pim-sm hello-interval ip pim-sm join-prune-interval
show ip pim-sm rp
NOTE This command is only supported by Layer 3 switches.
Use show ip pim-sm rp command to display PIM-SM RP information. Commands
show ip pim-sm rp Syntax
Description
show Show running system information ip Display IP information
pim-sm Display PIM-SM information rp PIM-SM RP information Defaults N/A
Command Modes
Privileged EXEC/ User EXEC Usage
Guidelines
N/A
Examples ICS-G7852A-4XG# show ip pim-sm rp
PIM-SM RP Set
Group Address |R| RP Address | Holdtime | Priority | Hash ========================================================== 224.0.0.0/4 172.230.1.4 112 0 7331bd32 224.0.0.0/4 172.230.1.1 78 0 2a523511 224.0.0.0/4 *172.200.1.3 86 0 7d18d1eb 224.0.0.0/4 172.200.1.2 112 0 3edf2058 Error messages N/A Related commands ip pim-sm no ip pim-sm ip pim-sm dr-priority ip pim-sm hello-interval ip pim-sm join-prune-interval
show ip rip
Use the show ip rip command to display the settings of RIP. Commands
show ip rip Syntax Description
show Show running system information ip Display IP information
rip Display RIP configurations Defaults N/A
Command Modes
Usage Guidelines
N/A
Examples PT-7828# show ip rip RIP Protocol : Enable RIP version : V2 Distribution
Connected : Enable Static : Disable OSPF : Disable RIP Enable Table
Interface Name IP VID Enable
--- --- --- --- vlan2if 192.168.102.1 2 Enable Error messages N/A Related commands N/A
show ip route
Use the show ip route user EXEC command to display current routing table entries. Commands
show ip route [static] Syntax
Description
show Show running system information ip Display IP information
route Display routing entries static Static routing entries Defaults N/A
Command Modes
Privileged EXEC/ User EXEC Usage
Guidelines
N/A
Examples PT-7828# show ip ospf neighbor Error messages N/A Related commands N/A
show ip vrrp
To display a detailed status of all Virtual Router Redundancy Protocol (VRRP) virtual routers, use the show ip
vrrp command in EXEC mode.
Commands show ip vrrp
Commands ip Display IP information vrrp Display VRRP information Defaults N/A
Command Modes
Usage Guidelines
PT-7828# show ip vrrp VRRP Enable Enable VRRP Interface Table
Interface Name IP Address VID Status 1 1.1.1.1 2 Init VRRP Basic Setting
VRRP Entry Enable :Enable Virtual IP :0.0.0.0 Virtual Router ID :0 Priority :100 Preemption Mode :Enable
--- Interface Name IP Address VID Status 2 2.2.2.2 3 Init VRRP Basic Setting
VRRP Entry Enable :Disable Virtual IP :0.0.0.0 Virtual Router ID :0 Priority :100 Preemption Mode :Enable
--- Examples N/A
Error messages N/A Related commands router vrrp vrrp vrrp preempt vrrp priority
show lldp
Use the show lldp command to display the LLDP settings and the LLDP neighbor information. Commands
show lldp show lldp entry Syntax
Description
show Show running system information lldp Display LLDP information
entry LLDP entries Defaults N/A
Command Modes
Privileged EXEC / User EXEC Usage
Guidelines
Examples PT-7828# show lldp
LLDP Enable : Enable Message Transmit Interval: 30 seconds PT-7828# show lldp entry
Port : 23
Neighbor ID : 00:90:e8:0a:0a:0a Neighbor Port : 3
Neighbor Port Descript : 100TX,RJ45.
Neighbor System : Managed Redundant Switch 00000 Port : 19
Neighbor ID : 00:90:e8:0a:0a:0a Neighbor Port : 2
Neighbor Port Descript : 100TX,RJ45.
Neighbor System : Managed Redundant Switch 00000 Port : 24
Neighbor ID : 00:90:e8:0a:0a:0a Neighbor Port : 1
Neighbor Port Descript : 100TX,RJ45.
Neighbor System : Managed Redundant Switch 00000 Error messages N/A Related commands lldp timer lldp run
show logging
Use the show logging user EXEC command to display the setting of the IP filter feature. Commands
show logging [event-log] Syntax
Description
logging Display syslog information event-log Display system event logs Defaults N/A
Command Modes
Privileged EXEC/ User EXEC Usage
Guidelines
N/A
Examples PT-7828# show logging Syslog server #1:
Syslog server #2: 192.168.1.2, port: 514 Syslog server #3: 192.168.1.3, port: 514 PT-7828# show logging event-log
Idx Boot Time or Uptime Log
--- ---- --- --- 1 337 2037/06/23, 20:46:08 192.168.127.1 admin Auth. ok 2 337 2037/06/23, 20:52:47 Authentication fail 3 338 2037/06/23, 21:51:59 Port 1-1(Trk1) link on 4 338 2037/06/23, 21:51:59 Port 1-2 link on 5 338 2037/06/23, 21:51:59 Port 1-5 link on 6 338 2037/06/23, 21:52:03 Port 1-5 link off
7 338 2037/06/23, 21:52:03 Warm start by Firmware Upgrade 8 338 2037/06/23, 21:52:04 Port 1-5 link on
9 338 2037/06/23, 22:03:43 192.168.127.1 admin Auth. ok 10 338 2037/06/23, 22:04:04 192.168.127.1 admin Auth. ok 11 338 2037/06/24, 00:02:47 Port 1-5 link off
12 338 2037/06/24, 00:02:48 Port 1-5 link on Error messages N/A Related commands logging
show mac-address-table
Use the show mac-address-table user EXEC command to display MAC addresses in the MAC address table. Commands
show mac-address-table [static | learned | mcast]
show mac-address-table [interface{ ethernet module/port | trunk trunk-id } ] Syntax
Description
mac-address-table Display MAC address forwarding table static Retrieve static MAC addresses learned Retrieve learned MAC addresses mcast Retrieve Multicast address interface Retrieve MAC address by interface ethernet Ethernet Port interface
module/port Port ID. E.g., 1/3, 2/1,... trunk Trunk interface
trunk-id Trunk ID. From 1 to 4 Defaults N/A
Command Modes
Privileged EXEC/ User EXEC Usage
Guidelines
N/A
Examples PT-7828# show mac-address-table Line Swap Fast Recovery : Enabled MAC Type VLAN Port
--- --- ---- --- 00-40-F4-8D-0D-F7 ucast(l) 1 1/5
PT-7828# show mac-address-table learned MAC Type VLAN Port
--- --- ---- --- 00-40-F4-8D-0D-F7 ucast(l) 1 1/5 Error messages N/A Related commands N/A