Problems with the image output (continued)
V- LINK Switch
Note Mode
Note Lower Key Assign
Note Upper Key Assign
Device ID
Input Select A Assign
Input Select B Assign
Effects-A1 Assign Effects-A2 Assign Effects-A3 Assign Effects-A4 Assign Effects-B1 Assign Effects-B2 Assign Effects-B3 Assign Effects-B4 Assign V-8_e.book 84 ページ ２００８年５月１５日 木曜日 午後１時１１分
Input/output settings Intr oduction Connections Basic operation Switc hing ima g es Eff ects BPM sync External de vices Video fader
Menu List (continued)
MIDI-related settings are made here.
Specifies the MIDI messages assigned to each button or fader
Bus A [FADE] button
OFF, CC 01–CC 05, CC 07–CC 31, CC 64–CC 95, ChAftTt, PitchBD
p. 65
Bus B [FADE] button
Bus A [CONTROL] fader
Bus B [CONTROL] fader
Specifies the MIDI message assigned to the Video fader
OFF, CC 01–CC 05, CC 07–CC 11–CC 31, CC 64–CC 95, ChAftTt, PitchBD
Specifies the MIDI messages assigned to each button or fader
TRANSITION buttons
OFF, CC 01–CC 05, CC 07–CC 31, CC 64–CC 95, ChAftTt, PitchBD
Bus A [TRANSFORMER] button
Bus B[TRANSFORMER] button
[BPM SYNC] button
Specifies the MIDI message that will adjust the transition time when using PR Control Mode (p. 75)
OFF, CC 01–CC 05, CC 07–CC 31, CC 64–CC 95, ChAftTt, PitchBD
Specifies the MIDI messages assigned to each button or fader
[BPM/CONTROL] knob
OFF, CC 01–CC 05, CC 07–CC 31, CC 64–CC 95, ChAftTt, PitchBD
[OUTPUT FADE] fader
[WHITE/BLACK] switch
[PC INPUT SELECT] switch
PREVIEW OUTPUT SELECT buttons
Specifies the MIDI message assigned to the [MEMORY] knob
CC 00 + CC 32 + PC, CC 01–CC 05, CC 07–CC 31, CC 64–CC 95, ChAftTt, PitchBD
Turns MIDI message transmission on/off when buttons or faders are operated
01: Video+MidiOut, 02: Video Only, 03: Midi Out Only
p. 67 Main menu (First level) Sub-menu (Second level) Value
(The factory setting is printed in bold characters.) See page MIDI Setup (continued)
Fade A Switch Assign
Fade B Switch Assign
Control A Assign
Control B Assign
Video Fader Assign
Transition Assign
Transformer A Assign
Transformer B Assign
BPM SYNC Assign
Transition Time Assign
BPM/CONTROL Assign
Output Fade Assign
White/Black Assign
PC Input Select Assign
Preview Output Assign
Memory Assign
Panel Mode [Mem2]–[Mem8] *4 V-8_e.book 85 ページ ２００８年５月１５日 木曜日 午後１時１１分
Menu List (continued) Main menu (First level) Sub-menu (Second level) Value
(The factory setting is printed in bold characters.) See page
MIDI-related settings are made here. Transmits the settings to MIDI-connected devices
--- p. 69
Returns the sub-menu settings to the factory- set state.
--- p. 34
Settings for the V-8 itself Turns memory protect on/off
Off, On p. 25
Adjusts the video input synchronization signal level
-48–0–+79 p. 56
Adjusts the brightness of the image being input to bus A.
-60–0–+61
Adjusts the color of the image being input to bus A.
-10–0–+11
Adjusts the hue of the image being input to bus A.
-125–0–+126
Adjusts the brightness of the image being input to bus B.
-60–0–+61
Adjusts the color of the image being input to bus B.
-10–0–+11
Adjusts the hue of the image being input to bus B.
-125–0–+126
Adjusts the horizontal size of the final output image.
0–30 p. 57
Adjusts the vertical size of the final output image.
0–30
Adjusts the black level reference (setup level) of the output signal.
0 IRE, 7.5 IRE
Sets the mode used for video fader operating
Normal, Quick p. 78
Sets the video fader operating curve
Curve-A, Curve-B, Curve-C p. 78
Calibrates the video fader for bus A
--- p. 77
Calibrates the video fader for bus B
---
Transition time when the INPUT SELECT buttons are operated
0–10–30 (Field) p. 35
MIDI Setup (continued) MIDI Bulk Dump
MIDI Reset
Utility Memory Protect
Video Sync Threshold
VideoA Bright Adjust
VideoA Color Adjust
VideoA Hue Adjust
VideoB Bright Adjust
VideoB Color Adjust
VideoB Hue Adjust
Video Display Range H
Video Display Range V
Video Out Black Level
Video Fader Mode
Video Fader Curve
Video Fader Calibrate A
Video Fader Calibrate B
Input Select Delay Time V-8_e.book 86 ページ ２００８年５月１５日 木曜日 午後１時１１分
Input/output settings Intr oduction Connections Basic operation Switc hing ima g es Eff ects BPM sync External de vices Video fader
Menu List (continued)
*5 The factory setting varies depending on the country.
Settings for the V-8 itself Adjusts the white level of the [OUTPUT FADE] fader
0–200–255 p. 32
Adjusts the black level of the [OUTPUT FADE] fader
0–255
Specifies the settings shown in the preview monitor
No display, Mode1, Mode2, Mode3 p. 27
Specifies the selection method for the preview output
Manual, Prev Auto, Always-1–8, Always-Out, Auto1-2–1-8, Auto1-Out
p. 22
Specifies the automatic transition time for the preview output
1–5–10
Turns on/off the preview output when no signal is present
Off, On p. 22
Specifies the preview output color when no signal is present
Cyan, Yellow, Red, Blue, SkyBlue, Green, Orange, Magenta
Turns on/off blue-back output when no signal is present
Off, On p. 21
Adjusts the horizontal location of the on- screen display
-15–0–+15 p. 25
Adjusts the horizontal location of the on- screen display
-5–0–+5
Turns color bar output on/off
Off, On p. 58
Returns the sub-menu settings to the factory- set state.
--- p. 34
Switches between NTSC and PAL.
NTSC, PAL p. 59
This restores the V-8 to its original factory default settings.
--- p. 33 Main menu (First level) Sub-menu (Second level) Value
(The factory setting is printed in bold characters.) See page Utility (continued) OutFade White Level
OutFade Black Level
Preview Display Mode
Preview Switch Pattern
Preview Auto Speed
Preview Signal Check
Preview No Signal Color
No Signal Blueback
OSD Horizontal Locate
OSD Vertical Locate
Color Bar Out
Utility Reset
NTSC/PAL *5
Factory Reset
Menu List (continued)