This chapter describes how to install/upgrade/uninstall AhsayOBS & AhsayRPS on your NAS device via AhsayNCU manual mode.
4.1 Install Guide
Download
Please download the corresponding version of AhsayNCU you required from our website.
Install
1. Open the wizard:
i. (For Windows) Double-click the execute file to open the installation wizard.
(For Linux) Unpack AhsayNCU to a temporary directory and run the installation wizard.
# mkdir /temp/ncu
# cd /temp/ncu/
# gunzip obsr-ncu-nix.tar.gz
# tar –xf obsr-ncu-nix.tar
# ./bin/run.sh
(For Mac) Expand the archive and run the installation wizard.
ii. Wait until all files are extracted to the system temporary directory. Please note that it can take up to 2 minutes to extract all files on slow computers.
iii. The installation wizard will start and search for supported NAS devices available on the network automatically. This auto discovery process can discovery the NAS from Thecus and NETGEAR only. If NCU is not able to find a supported NAS device, please click the [Manual] button to continue and go to step 2ii.
2. Select and access the NAS device:
i. If the NAS device is connected to your network, you should be able to see the NAS device on the. If you have more than one NAS device on the network, you can identify each of them by the information displayed on the right hand side. Please select the correct NAS device and press the [Manual] button to continue.
Ahsay Systems Corporation Limited Page 41 of 64 (October 19, 2009) ii. Enter the [IP Address] of the target NAS device and select the corresponding NAS model
from the list.
iii. For some NAS device, the installation wizard has to login as the administrator to access them. If you have not changed the password before, the default password will be entered into the field and logon the NAS device automatically. Otherwise, please enter the correct password in the text field provided. Then press the [Next] button to continue.
For those NAS devices that don’t required authentication, the installation wizard will skip this login page and jump to the next step automatically.
Ahsay Systems Corporation Limited Page 43 of 64 (October 19, 2009) 3. Install AhsayOBS & AhsayRPS:
i. Now you are ready to install AhsayOBS & AhsayRPS to the NAS device. Since the NAS device will be rebooted automatically after installation, please make sure you have nothing important running on the NAS device before you press the [Yes] button to start the installation process.
ii. The installation process can take up to 5 minutes. The NAS devices will be rebooted upon completion. After rebooting, it will take another 5 minutes for the NSA device to startup the AhsayOBS & AhsayRPS service. Please note that NAS device is not as powerful as standard PC server and be patient with this.
Ahsay Systems Corporation Limited Page 45 of 64 (October 19, 2009) iii. If you can see the AhsayOBS & AhsayRPS web administrator console, the installation
has completed successfully. AhsayOBS & AhsayRPS are now ready to use.
4.2 Upgrade Guide
Download
Please download the corresponding version of AhsayNCU you required from our website.
Upgrade Instructions 1. Open the wizard:
i. (For Windows) Double-click the execute file to open the installation wizard.
(For Linux) Unpack AhsayNCU to a temporary directory and run the installation wizard.
# mkdir /temp/ncu
# cd /temp/ncu/
# gunzip obsr-ncu-nix.tar.gz
# tar –xf obsr-ncu-nix.tar
# ./bin/run.sh
(For Mac) Expand the archive and run the installation wizard.
ii. Wait until all files are extracted to the system temporary directory. Please note that it can take up to 2 minutes to extract all files on slow computers.
iii. The installation wizard will start and search for supported NAS devices available on the network automatically. This auto discovery process can discovery the NAS from Thecus and NETGEAR only. If NCU is not able to find a supported NAS device, please click the [Manual] button to continue and go to step 2ii.
Ahsay Systems Corporation Limited Page 47 of 64 (October 19, 2009) 2. Select and access the NAS device:
i. If the NAS device is connected to your network, you should be able to see the NAS device on the. If you have more than one NAS device on the network, you can identify each of them by the information displayed on the right hand side. Please select the correct NAS device and press the [Next] button to continue.
ii. Enter the [IP Address] of the target NAS device and select the corresponding NAS model from the list.
Ahsay Systems Corporation Limited Page 49 of 64 (October 19, 2009) iii. For some NAS device, the installation wizard has to login as the administrator to access
them. If you have not changed the password before, the default password will be entered into the field and logon the NAS device automatically. Otherwise, please enter the correct password in the text field provided. Then press the [Next] button to continue.
For those NAS devices that don’t required authentication, the installation wizard will skip this login page and jump to the next step automatically.
3. Upgrade AhsayOBS & AhsayRPS:
i. Now you are ready to upgrade AhsayOBS & AhsayRPS to the NAS device. Since the NAS device will be rebooted automatically after the upgrade process, please make sure you have nothing important running on the NAS device. When you are ready, select [Upgrade AhsayOBS & AhsayRPS] and click the [Next] button.
Ahsay Systems Corporation Limited Page 51 of 64 (October 19, 2009) ii. The upgrade process can take up to 5 minutes. The NAS devices will be rebooted upon
completion. After rebooting, it will take another 5 minutes for the NSA device to startup the AhsayOBS & AhsayRPS service. Please note that NAS device is not as powerful as standard PC server and be patient with this.
iii. If you can see the AhsayOBS & AhsayRPS web administrator console, the upgrade has completed successfully. AhsayOBS & AhsayRPS are now ready to use.
Ahsay Systems Corporation Limited Page 53 of 64 (October 19, 2009)
4.3 Uninstall Guide
Download
Please download the corresponding version of AhsayNCU you required from our website.
Uninstall Instructions 1. Open the wizard:
i. (For Windows) Double-click the execute file to open the installation wizard.
(For Linux) Unpack AhsayNCU to a temporary directory and run the installation wizard.
# mkdir /temp/ncu
# cd /temp/ncu/
# gunzip obsr-ncu-nix.tar.gz
# tar –xf obsr-ncu-nix.tar
# ./bin/run.sh
(For Mac) Expand the archive and run the installation wizard.
ii. Wait until all files are extracted to the system temporary directory. Please note that it can take up to 2 minutes to extract all files on slow computers.
iii. The installation wizard will start and search for supported NAS devices available on the network automatically. This auto discovery process can discovery the NAS from Thecus and NETGEAR only. If NCU is not able to find a supported NAS, please click the [Manual]
button to continue and go to step 2ii.
2. Select and access the NAS device:
i. If the NAS device is connected to your network, you should be able to see the NAS device on the. If you have more than one NAS device on the network, you can identify each of them by the information displayed on the right hand side. Please select the correct NAS device and press the [Next] button to continue.
Ahsay Systems Corporation Limited Page 55 of 64 (October 19, 2009) ii. Enter the [IP Address] of the target NAS device and select the corresponding NAS model
from the list.
iii. For some NAS device, the installation wizard has to login as the administrator to access them. If you have not changed the password before, the default password will be entered into the field and logon the NAS device automatically. Otherwise, please enter the correct password in the text field provided. Then press the [Next] button to continue.
For those NAS devices that don’t required authentication, the installation wizard will skip this login page and jump to the next step automatically.
Ahsay Systems Corporation Limited Page 57 of 64 (October 19, 2009) 3. Uninstall AhsayOBS & AhsayRPS:
i. Now you are ready to Uninstall AhsayOBS & AhsayRPS to the NAS device. Since the NAS device will be rebooted automatically after the upgrade process, please make sure you have nothing important running on the NAS device. When you are ready, select [Uninstall AhsayOBS & AhsayRPS but keep all users’ data and settings] to uninstall the program files of AhsayOBS & AhsayRPS but AhsayNCU will retain a copy of all users’
data and system setting on the NAS device for later use. To remove ALL data and system settings with the program files, please select the [Uninstall AhsayOBS &
AhsayRPS and delete all users’ data and settings] option.
ii. The uninstall process can take up to 5 minutes. The NAS devices will be rebooted upon completion.
Ahsay Systems Corporation Limited Page 59 of 64 (October 19, 2009) iii. After uninstalling AhsayOBS & AhsayRPS, the NAS manufacturer administration
console will be relocated back to port 80 and 443 automatically.
4.4 Log Files
The log files of AhsayNCU can be found in the following locations:
(For Windows) %Temp%\[Random Folder Name]\log (For Linux) %NCU_FOLDER%\log
(For Mac) %NCU_FOLDER%\log
Ahsay Systems Corporation Limited Page 61 of 64 (October 19, 2009)