Conversion kit aluminium,1.0 or 1.2 mm. Combination teflon liner with flange- mounted brass spiral to extend the current transition zone in the torch neck, O-ring, collet and brass support pipe. For torches up to 4 m. Order no. 551.2014.0 (PG2)
Conversion kit stainless steel,0.6/0.8/1.0 mm Combination carbon - teflon liner with
flange-mounted brass spiral to extend the current transition zone in the torch neck, O-ring, collet and brass support pipe. For torches up to 5 m. Order no. 551.2015.0 (PG2)
Liners ML 1500, ML 1500 PM Liners ML 2400, ML 2400 PM
Liner for steel wire 0.6 - 0.9 mm, colour code blue For 3 m torch, (PG02), order no. 535.8300.1
For 4 m torch, (PG02), order no. 535.8300.2
Liner for steel wire 1.0 - 1.2 mm, colour code red For 3 m torch, (PG02), order no. 535.8300.3 For 4 m torch, (PG02), order no. 535.8300.4 Ergonomics, a highly flexible hose set, wear-proof torch
neck and optimum current transmission all interact in these torches to ensure optimum welding characteristics and a service life that pays dividends.
A 1700 torch
ML 1500, 3 m long, order no. 503.1500.3 (PG2) ML 1500, 4 m long, order no. 503.1500.4 (PG2)
When using for MIG brazing, brazing torch set order no. 551.2015.0 is additionally required
A 2200 torch
ML 2400, 3 m long, order no. 503.2400.3 (PG2) ML 2400, 4 m long, order no. 503.2400.4 (PG2)
When using for MIG brazing, brazing torch set order no. 551.2015.0 is additionally required
A 1700 PowerMaster torch
ML 1500 PM, 3 m long, order no. 503.1501.3 (PG2) ML 1500 PM, 4 m long, order no. 503.1501.4 (PG2) When using for MIG brazing, brazing torch set order no. 551.2015.0 is additionally required
A 2200 PowerMaster torch
ML 2400 PM, 3 m long, order no. 503.2401.3 (PG2) ML 2400 PM, 4 m long, order no. 503.2401.4 (PG2) When using for MIG brazing, brazing torch set order no. 551.2015.0 is additionally required
PowerMaster torch.Regulate power and speed by remote control in the torch itself.
Contact tips for torch, ML 1500 + ML 1500 PM, PG2 Design Pack Order no.
0.6 mm M6 5 535.8101.1
0.8 mm M6 5 535.8101.2
1.0 mm M6 5 535.8101.3
For aluminium wire
1.0 mm M6 5 535.8101.5
1.2 mm M6 5 535.8101.6
Contact tips for torch, ML 2400 + 2400 PM, PG2
0.6 mm M6 5 535.8106.1
0.8 mm M6 5 535.8106.2
1.0 mm M6 5 535.8106.3
For aluminium wire
1.0 mm M6 5 535.8106.5
1.2 mm M6 5 535.8106.6
Retaining springs for gas nozzles, PG2
For ML 1500 + PM 10 535.8100.9
Contact tip holders, PG2
For ML 2400 + PM 2 535.8120.4
Gas diffuser, PG2
For ML 2400 + PM 2 535.8120.3
Plug-in gas nozzles, for torch ML 1500 + PM, PG2
Tapered gas nozzle 3 535.8100.1 Cylindrical gas nozzle 3 535.8100.2 Spot gas welding nozzle 3 535.8100.3
Plug-in gas nozzles, for torch ML 2400 + PM, PG2
Tapered gas nozzle 3 535.8120.1 Cylindrical gas nozzle 3 535.8120.2
39
Torch original equipment kit
Containing the different accessory kits - but packaged safely
and neatly in a sturdy plastic case with handy compartments Order no. 551.0490.1 (PG12) for ML 1500, just
Order no. 551.0490.3 (PG12) for ML 2400
Set of torch wearing parts for ML 2400
Case containing the following main wearing parts :
3 tapered gas nozzles, 10 contact tips 1.0 mm, Order no. 551.2524.0 (PG12)
Set of torch wearing parts for ML 1500
Case containing the following main wearing parts.
3 tapered gas nozzles, 10 contact tips 0.8 mm, 10 retaining springs. Order no. 551.1508.0 (PG12)
MIG-MAG welding wire SG2, 0.8 mmfor welding
unalloyed steel. Small spool D200, 5 kg, Order no. 590.0008.1 (PG12)
SG2, 0.8 mmfor welding unalloyed steel. Standard spool K300, 15 kg,
Order no. 590.0008.6 (PG12)
SG2, 1.0 mmfor welding unalloyed steel. Standard spool K300, 15 kg,
Order no. 590.0010.4 (PG12)
AlMg5, 1.0 mmfor welding
aluminium. Small spool D200, 2.0 kg, Order no. 590.0410.0 (PG12)
AlMg5, 1.2 mmfor welding
aluminium. Small spool D200, 2.0 kg, Order no. 590.0412.0 (PG12)
1.4316, 0.8 mmfor welding stainless steel (V2A). Small spool D200, 5.0 kg, Order no. 590.0208.1 (PG12)
Cored wire for welding without shielding gas
0.9 mm dia. For low-alloyed sheet materials up to 15 mm.
Small spool D 200, 4.5 kg Order no. 590.0200.9 (PG 12)
High-grade brazing wires ACuSi
CuSi3-wire for galvanised sheet 0.8 mm, small spool D200, 5 kg, order no. 590.1008.1 (PG 12) 0.8 mm, basket coil K 300, 15 kg, order no. 590.1008.3 (PG 12) 1.0 mm, small spool D200, 5 kg, order no. 590.1010.1 (PG 12) 1.0 mm, basket coil K300, 15 kg, order no. 590.1010.3 (PG 12) CuAl8 wire for stainless steel 0.8 mm, small spool D200, 5 kg, order no. 590.1108.1 (PG 12) 0.8 mm, basket coil K 300, 15 kg, order no. 590.1108.3 (PG 12) 1.0 mm, small spool D200, 5 kg, order no. 590.1110.1 (PG 12) 1.0 mm, basket coil K300, 15 kg, order no. 590.1110.3 (PG 12)
Original equipment kit for torch ML 1500, 3 m Kit including the most important torch wearing parts at an affordable all-in price. Contains: 1 tapered gas nozzle,
1 spot gas welding nozzle, 5 contact tips 0.8 mm, 1 liner blue 0.6-0.9 mm, 3 retaining springs,
1 Lorch separating spray 400 ml. Order no. 551.1021.0 (PG2)
Original equipment kit for torch ML 2400, 3 m Kit including the most important torch wearing parts at an affordable all-in price. Contains:
1 tapered gas nozzle, 1 spot gas welding nozzle, 5 contact tips 1.0 mm, 1 liner red 1.0-1.2 mm, 1 contact tip holder,
1 Lorch separating spray 400 ml. Order no. 551.1024.0 (PG2)
MIG-MAG accessories A 1700, A 2200 and CuSi
The original Lorch torch and original Lorch spares are essential components of an A.
There are people who think it is a good idea to produce copies of them. At first glance, you may well save a good 20 - 40% by buying these counterfeit copies. But you can rest assured they are made of cheaper basic materials. Otherwise there would be no profit margin for the plagiarists. After all, our spare parts are just as valuable and complex to produce as the system itself.
Electrode welding cable with electrode holder
25 mm2, 4 m long, with electrode
holder and 13 mm connecting plug. Is required to weld electrodes. Order no. 551.0220.0 (PG 14)
Adaptor for basket coils K300
Included in the scope of supply of the A models. Spares:
Order no. 551.9020.0 (PG12)
Adaptor for small spools
For using plastic spools with a 200 mm diameter. Spacer guarantees reliable wire feed.
Order no. 620.9650.0 (PG 12)
Feed rolls A 1700 and A 2200
For steel/stainless steel wires 0.6 / 0.8 mm Order no. 620.8700.0 (PG12)
For steel/stainless steel wires 0.8 / 1.0 mm Order no. 620.8701.0 (PG12)
For steel/stainless steel wires 1.0 / 1.2 mm Order no. 620.8710.0 (PG12)
For Aluminium and brazing wires 0,8/1,0 mm Order no. 620.8701.1 (PG 12)
For aluminium wires 1.0 /1.2 mm Order no. 620.8710.1 (PG12) Lorch separating spray 400 ml
Forms a thin protective film in the gas nozzle to protect against sintering of hot weld splashes.
Order no. 551.9000.0 (PG2)
Ground cables
With ground clamp and plug. Another case where quality counts. Steady, reliable current
transmission is imperative to a neat, tidy job. Defective or worn ground cables really do have to be replaced. A 1700 and A 2500
25mm2, 4m, plug 13mm,
Order no.551.0120.0
Special pliers MIG-MAG
4 functions. Cutting the welding wire.
Cleaning the shielding gas nozzle. Pulling off the gas nozzle. Releasing the contact tip.
Order no. 535.8225.1 (PG12)
MIG-MAG protective gloves
Made of high-grade, durable leather. With wear-resistant seam. What a real welder’s glove should look like. Order no. 535.8210.0, (PG12)
Autoprotect X 10+11,protective level DIN 10. Converts to DIN 11. MIG-MAG/electrodes welding. Order no. 550.5311.0 (PG12)
Autoprotect Flex 9-13,
protective level DIN 9 to 13. Electrode/ MIG-MAG/TIG. Dark/light switching. Sensor bar.
Order no. 550.5312.0 (PG12)
Autoprotect Multiflex 5-13
protective level DIN 5 to 13. Electrode/ MIG-MAG/TIG. Daylight filter, sensitivity regulator. Keeps going where other helmets give up the ghost.