MS01 with Printer and Scanner Support
Installs the MS01, printer, and scanner functionality on the ICIII server.
Supported printers in this configuration include network and USB printers.
Supported scanners in this configuration include USB scanners only.
Hardware Associated with this Setup Type
This installation setup type is only applicable with an SP 500 Scanner. SP 500 scanners no longer have separate computers (SPCs/MCUs); these scanners now use the MS01 ICIII Server as their SPC/MCU computer.
This setup type should be chosen when installing on the computers associated with the following printers:
LP 5000 printer LP 7700 printer
LP 7000 printer LP 7900 printer
LP 7100 printer ASK
LP 7200 printer DL 400 printer
LP 7500 printer DL 410 printer
LP 7600 printer Note: The DL 430 printer is installed via separate printer software.
>>> To install MS01 with Printer and Scanner Support:
1 Before beginning this installation, you must complete all pre-MS01 installation tasks referenced in the installation workflow table at the beginning of this guide (page 12).
2 Insert the MS01 Installation CD into the ICIII’s CD-ROM drive.
3 If the CD does not auto-run the installer, navigate to the CD-ROM drive via the Windows Start > Run or Explorer feature, and double-click the setup.exe file in the EZ171 directory.
The software launches, and the Choose Setup Language screen displays.
4 Select the language that the software should display.
5 Click Next >.
The Choose Setup Language screen closes, and the InstallShield Wizard launches, using the selected language.
6 Click Next >.
The Setup Type > Select System Type screen displays.
7 Select MS01 with Printer and Scanner Support.
8 Click Next >.
The Setup Type > Additional Security screen displays.
9 o If you want to lock down the system to prevent the end user from accessing the operating system while running the Fuji software (operator mode), select the Add additional security to this system check box.
o If Add additional security to this system is not selected, the system runs in support mode.
10 Click Next >.
The Setup Type > Disc Writer Support screen displays.
11 o If the system will be using a CD writer, select the Local Disc Writer option.
o If the system will be using a Rimage CD duplication device, select the Rimage option.
o If the system will not be writing CDs, select the None option.
12 Click Next >.
The Setup Type > Please select type of printer screen displays.
13 From the drop-down menu, select the printer for this configuration.
14 Click Next >.
The Information screen displays.
Note: If an error dialog opens, then a component name has been incorrectly typed into an Edit Data screen. Click OK and the Edit Data information that needs to be changed will appear.
15 Review the system information displayed in the body of the screen.
16 If the information is incorrect, click < Back and modify settings, as appropriate. If the information is correct, click Next >.
The Setup Status > Installing screen displays.
Once progress in the screen completes, several small installation screens open and self-dismiss.
The system restarts.
WARNING: DO NOT REMOVE THE INSTALLATION CD FROM THE CD-ROM DRIVE.
The InstallShield wizard continues with installation.
An InstallShield Wizard Complete screen displays.
17 Reference the following instructions based on your hardware configuration.
LP 7x00 / DL 4x0 + SP 500 Scanners a If you are installing a 7x00-series printer
with an SP 500 model scanner, an InstallShield Wizard Complete screen displays.
b Select the No radio button (so the system does NOT restart).
c Click Finish. The MS01 installer closes.
d Insert the printer’s SDK installation CD and run the installer.
e Perform all instructions noted during the printer installation.
f Insert the MS11 for SP 500 installation CD and run the installer.
g Perform all instructions noted during the scanner installation.
h Once the installation is complete, restart the system.
ASK / LP 5000 + SP 500 Scanners a If you are installing an ASK or LP 5000
model printer with an SP 500 model scanner, an InstallShield Wizard Complete screen displays.
b Select the No radio button (so the system does NOT restart).
c Click Finish. The MS01 installer closes.
d Insert the MS11 for SP 500 installation CD and run the installer.
e Perform all instructions noted during the scanner installation.
f Once the scanner installation is complete, restart the system.
18 Proceed following the installation workflow referenced on page 13; subsequent installations are required.
MS01 Workstation
MS01 Workstation
Select this option when additional MS01 workstation computers are added to the system.
A scanner is not connectable to a workstation.
>>> To install MS01 Workstation:
1 Before beginning this installation, you must complete all pre-MS01 installation tasks referenced in the installation workflow table at the beginning of this guide (page 12).
2 Insert the MS01 Installation CD into the ICIII workstation’s CD-ROM drive.
3 If the CD does not auto-run the installer, navigate to the CD-ROM drive via the Windows Start >
Run or Explorer feature, and double-click the setup.exe file in the EZ171 directory.
The software launches, and the Choose Setup Language screen displays.
4 Select the language that the software should display.
5 Click Next >.
The Choose Setup Language screen closes, and the InstallShield Wizard launches, using the selected language.
6 Click Next >.
The Setup Type > Select System Type screen displays.
7 Select MS01 Workstation.
8 Click Next >.
The Setup Type > Additional Security screen displays.
9 o If you want to lock down the system to prevent the end user from accessing the operating system while running the Fuji software (operator mode), select the Add additional security to this system check box.
o If Add additional security to this system is not selected, the system runs in support mode.
10 Click Next >.
The Setup Type > Disc Writer Support screen displays.
11 o If the system will be using a CD writer, select the Local Disc Writer option.
o If the system will not be writing CDs, select the None option.
12 Click Next >.
The Edit Data > Enter the name of the MS01 system screen displays.
The Information screen displays.
Note: If an error dialog opens, then a component name has been incorrectly typed into an Edit Data screen. Click OK and the Edit Data information that needs to be changed will appear.
13 Review the system information displayed in the body of the screen.
14 If the information is incorrect, click < Back and modify settings, as appropriate.
If the information is correct, click Next >.
The Setup Status > Installing screen displays.
Once progress in the screen completes, several small installation screens open and self-dismiss.
The system restarts.
WARNING: DO NOT REMOVE THE INSTALLATION CD FROM THE CD-ROM DRIVE, the InstallShield wizard continues with installation.
Finally, an InstallShield Wizard Complete screen displays.
15 Ensure that the Yes, I want to restart my computer again. radio button is selected.
16 Remove the CD from the CD-ROM drive.
17 Click Finish.
The system restarts.
Fujifilm applications launch.
18 Proceed following the installation workflow referenced on page 15; subsequent installations are required.