Front-foil with 30 keys
6.4 Operating options
Operating processes marked with an * are not available for all country versions.
Different operating types can be set in the device:
1. Multi-operating mode see page 6 - 2
Multiple salespeople can operate the device at the same time.
Menu setting
- Pr 510/ 01 -01 Setting multi-operator mode - Pr 510/ 02 Setting ticket or label layout
- Pr 505 Set type of paper
- Setting Pr 520 submenu 01 to 08 General operating procedure
Place the article on the scale.
Input price 2
! @
Press PLU direct key, e.g. <PLU2>.
or
Enter the unit price directly, e.g. EUR 2.98 PLU registration
1 Press operator key e.g.<OP1>.
Ticket layout: The article is registered but not printed.
Label layout: The article is registered and the label is printed.
Printout of the article depends on the menu setting Pr 520/02.
Conclude sale
Press <total>.
1 Press the operator key, e.g. <OP1>.
Ticket layout: Item and total are printed on ticket.
Label layout: Printout of the article and the total depends on the menu setting Pr 520/02, see page7 - 92.
6
Operating instruction BC II Operation
6.4.2 Self-service mode
_______________________________________________________________________
The article can only be called up via on PLU direct key.
- Only PLU direct keys under which weight articles are stored can be called up. Piece PLU, manual PLU or minus PLU cannot be called up - you hear an acoustic signal.
- Reports cannot be created in this operating mode.
_______________________________________________________________________
Menu setting
- Pr 505 Setting label paper
- Pr 510/ 01 -01 Setting self-service mode - Pr 510/ 02 1 Setting label layout
Operating procedure:
Place the article on the scale.
Print article 2
! @
Press the PLU direct key of the article applied e.g. <PLU2>.
The label is printed.
6
Operating instruction BC II Operation
6.4.3 Quick-service mode
Register with operator key Menu setting
- Pr 510/ 01 -03 Setting self-service mode - Pr 510/ 02 -1 Setting label layout
- Pr521 -0 Recording with operator key Operating procedure:
Place the article on the scale.
Call up article 2
! @
Press the PLU direct key e.g. <PLU2>.
Register article and print
1 Press operator key <VK1>.
The label is printed.
or (dependent on country) Press <Print>.
The label is printed.
Register automatically Menu setting
- Pr 510/ 01 -03 Setting self-service mode - Pr 510/ 02 -1 Setting label layout
- Pr 521 -1 register automatically Operating procedure:
Place the article on the scale.
Call up article, then register and print 2
! @
Press the PLU direct key e.g. <PLU2>.
It is registered to Operator 1.
The label is printed.
6
Operating instruction BC II Operation
6.4.4 Price labeling with manual triggering *
Menu setting
- Pr 510/01 -04 Price labeling with release by hand - Pr 510/ 02 -1 Label layout
- Pr 525/ 01 Setting labeling mode
Call up article
Place the article on the scale.
2
! @
Press the PLU direct key e.g. <PLU2>.
The PLU is called up and at the same time, the constant function is activated.
Register article and print label
1 Press operator key e.g.<OP1>.
The label is printed.
Remove the article from the scale.
Place the next article on the scale.
1 Press operator key e.g.<OP1>.
You can label via the PLU that has been called up until a different PLU is called up, or until the <C> key is pressed.
Create batch sum label * Menu setting
- Pr 510/ 03 -1 with addition Press <total>.
The batch sum label is printed.
6
Operating instruction BC II Operation
6.4.5 Price labeling with automatic start *
Menu setting
- Pr 510/01 -05 Price labeling with automatic release - Pr 510/ 02 -1 Label layout
- Pr 525/ 01 Setting labeling mode
Call up article
Place the article on the scale.
3
'' Press the PLU direct key e.g. <PLU3>.
The PLU is called up and at the same time, the constant function is activated.
Register article and print label
1 Press operator key e.g.<OP1>.
The label is printed.
Remove the article from the scale.
Place the article on the scale.
The label is printed. Printing happens automatically after each change of weight.
You can label via the PLU that has been called up until a different PLU is called up, or until the <C> key is pressed.
Create batch sum label * Menu setting
- Pr 510/ 03 -1 with addition Press <Total>.
The batch sum label is printed.
6
1,50 K
1
00 1,50K
15 1,50K
14 1,50K 00 1,50K
0,000 0, 00 0,00K
Operating instruction BC II Operation
6.4.6 Piece price multi- label printing
A number of identical price per piece labels can be created in price labeling mode.
Menu setting
- Pr 510/01 -04 or 05 Price labeling
- Pr525/ 02 -00-99 Time in sec. between printing of two labels General operating procedure
Input price.
4
$ Press the PLU direct key for unit price e.g. <PLU4>.
The constant function 1 is activated.
Define number of labels
Press <Multiplication> .
Enter the number of labels, e.g. 15.
PLU registration
1 Press operator key e.g.<OP1>.
The labels are printed.
The number of labels being printed is continually displayed.
End
Press <C>.
6
0,500 12, 00 6,00K
1
_ _K
15K
0,500 12, 00 6,00K Operating instruction BC II Operation
6.4.7 Fixed weight label multi-printing
A number of identical fixed weight labels can be created in price labeling mode.
Menu setting
- Pr 510/01 -04 or 05 Price labeling
- Pr525/ 02 -00-99 Time in sec. between printing of two labels General operating procedure
4
$ Press the PLU direct key for fixed weight e.g. <PLU5>.
The constant function 1 is activated.
Define number of labels
+ Press and hold <Shift>. Then press
<Multiplication>
Enter the number of labels, e.g. 15.
Press <Enter>
The number of labels is herewith confirmed.
PLU registration
1 Press operator key e.g.<OP1>.
The labels are printed.
End
Press <C>.
6
0,556 0,00 0,00
Operating instruction BC II Operation
6.5 Unit price input via 10-key keypad
_______________________________________________________________________
With key you can switch between entry of unit price and PLU no.
Switchover depends on the setting in Pr 535.
_______________________________________________________________________
6.5.1 Operating processes for non-programmed articles (non-PLU)
Unit price input Price/kg
Place article on the scale.
Enter the unit price.
Read off the selling price.
1 Register
e.g. on operator <VK1>.
The selling price is saved to the buffer.
Price per piece manual input
Press <non-weighed>.
Enter the price per piece, e.g. 8.65
1 Register
e.g. on operator <VK1>.
Multiplication of price per piece non-weighed Press <non-weighed>.
Enter the price per piece, e.g. 8.65
Press <multiplication>.
Enter the number of pieces, e.g. 5.
1 Register
e.g. on operator <VK1>.