En-55
Operating Other Components with
the Remote Controller
Functions of REMOTE MODE Buttons You can control any other device than this unit by programming a specified remote control code to a REMOTE MODE button of the remote controller. Register a remote control code to a desired REMOTE MODE button and press it to enter the remote mode that allows you to operate the corresponding device.
z
½The RCV and ZONE2/ZONE3 buttons cannot be programmed.
Programming Remote Control Codes
z
Searching in the Setup Menu
You can search a remote control code and register it to a desired REMOTE MODE button in the unit's Setup menu. 1. After pressing RCV on the remote controller, press
SETUP.
2. With the cursors, select "7. Remote Controller" - "Remote Mode" and press ENTER.
3. With the cursors, select the REMOTE MODE button for which you want to register a remote control code and press ENTER to display the subcategory selection screen.
4. With the cursors, select the target subcategory, and then press ENTER to display the brand name input screen. 5. Select a character with the cursors and press ENTER.
Repeat it to enter the first three characters of the brand name.
6. Select "OK" with the cursors and press ENTER.
● After a search is done, the list of possible brand
names is displayed. If the brand name list is not displayed, select "Not Listed" with the cursors and press ENTER to return to the brand name input screen in step 5.
7. With the cursors, select the target brand name, and then press ENTER.
● When the brand name is specified, the remote
control code of the brand and how to register it will be displayed on the TV screen.
8. Follow the guidance displayed on the TV screen. 9. If the component can successfully be operated with its
registered remote control code, select "OK" with the cursors and press ENTER.
● Only TV remote control codes can be entered for TV.
● Program a remote control code in accordance
with the input since each button also works as the input selector. (For example, when the CD player is connected to the CD jack, program the remote control code for the CD player to CD)
● If the component cannot be operated, select "Try
Next Code" with the cursors and press ENTER to display another code.
z
Consulting the Remote Control Code List
Find the remote control code in the remote control code list. 1. Look up the Remote Control Codes at the back of the
manual for the corresponding remote control code.
● The codes in the Remote Control Code List are those
known as of the date of publication and may be changed.
● The following REMOTE MODE buttons are
preprogrammed with remote control codes. BD/DVD: Onkyo Blu-ray Disc/DVD player CD: Onkyo CD player
STRM BOX: Apple TV
● Only TV remote control codes can be entered for TV. ● Program a remote control code in accordance
with the input since each button also works as the input selector. (For example, when the CD player is connected to the CD jack, program the remote control code for the CD player to CD)
2. Press and hold DISPLAY for 3 or more seconds while holding down the REMOTE MODE button to which you want to program the remote control code.
● The remote indicator lights in the input mode.
3. With the number buttons, enter the 5-digit remote control code within 30 seconds.
● Programming is complete when the remote indicator
flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. Try programming again.
Operating Other Components with the Remote Controller
En-56
z
Remapping the Colored Buttons
The colored button assignment on the AV receiver's remote controller can be remapped to match that on the remote controller of the component whose remote control code you programmed to REMOTE MODE. However, you will not be able to remap the colored buttons if Zone 2/Zone 3 is selected.
1. Hold down the REMOTE MODE button to map and A (Red) simultaneously until the remote indicator lights (about 3 seconds).
● Remapping is possible only for codes included in the
categories of the Remote Control Code List (DVD player, TV, etc.)
2. Within 30 seconds, press the colored buttons from left to right, in the order you want to remap.
● For example, if the colored buttons on the remote
controller of the other component are yellow, green, blue, and red from left to right, press the buttons on the AV receiver's remote controller in that order.
● Programming is complete when the remote indicator
flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. Try programming again.
● Pressing any other button than a colored button
cancels the remap operation.
z
Resetting the REMOTE MODE Buttons
You can reset the remote control code registered in the REMOTE MODE button to its default status. This operation can be executed on a single REMOTE MODE button. 1. Press and hold Q for 3 or more seconds while holding
down the REMOTE MODE button you want to reset.
● The remote indicator will light.
2. Within 30 seconds, press the REMOTE MODE button again.
● Resetting is complete when the remote indicator
flashes twice.
To reset all the remote controller settings: While holding
down RCV, press and hold Q for 3 or more seconds until the remote indicator stays lit. Within 30 seconds, press RCV again. Resetting is complete when the remote indicator flashes twice.
TV operation
Press the REMOTE MODE button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component. Then, operate by using the corresponding buttons. Available buttons vary depending on the product category of the component. Operation may be incorrect or impossible depending on the product.
1 2 3 4 1 REMOTE MODE 2 , INPUT, VOL / 3 MUTING 4 CH +/– 5 8 9 6 7 5 GUIDE 6 / / / , ENTER 7 HOME 8 PREV CH 9 RETURN