Use the Outlet User Manager option to set up user accounts that have access only to specified outlets.
Web interface. Choose a user name, or choose Add New User to edit accounts.
Setting Definition
User Name The name of this user account.
NOTE:A user name in orange indicates that the user account has been disabled.
Password Case-sensitive password for this user account.
User Description Identification or description of the outlet user.
Account Status Enables or disables this user’s account.
Outlet Access Selects the outlets to which users have access.
Delete User Deletes this user account.
USER’S GUIDE Switched Rack PDU
Control console. Select System from the Control Console menu. Then select Manage Outlet Users from the User Manager menu.
Setting Definition
Add Outlet User Account or
Edit Outlet User Account
User Name: The user name for logging on to this user account.
Password: Case-sensitive password for this user account.
Description: Identification of the outlet user.
Delete Outlet User Account Enter the user name of the outlet user account to delete.
Disable Outlet User Account Enter the user name of the outlet user account to disable.
Enable Outlet User Account Enter the user name of the outlet user account to enable.
Edit Users Outlet Access Select the outlets to which users have access:
1. Enter the user name of the outlet user account to modify.
2. Select the numbers of the outlets to which the outlet user will have access:
•To add access to an outlet, enter an outlet number and press ENTER. Enter a space character when you finish adding access to outlets.
•To remove access to an outlet, enter an outlet number preceded by a minus sign (-) and press ENTER. Enter a space character when you finish removing access to outlets.
List Outlet Users Accounts Display outlet user name, status, description, and outlet access for each outlet user account.
RADIUS
RADIUS (Remote Authentication Dial-In User Service) is an authentication, authorization, and accounting service. APC supports the authentication and authorization functions of RADIUS. Use this option to centrally administer remote access for each Rack PDU.
When a user accesses the Switched Rack PDU, it sends an authentication request to the RADIUS server to determine the user’s permission level.
RADIUS user names are limited to 32 characters.
For more information on user permission levels, see Types of user accounts.
The RADIUS server and the Rack PDU must be configured before RADIUS authentication and authorization will operate properly.
RADIUS servers use port 1812 by default to authenticate users. To use a different port, add a colon followed by the new port number to the end of the RADIUS server name or IP address.
USER’S GUIDE Switched Rack PDU
Configuring the Rack PDU.
RADIUS Setting Definition
Access Local Only: RADIUS is disabled. Local authentication is enabled.
RADIUS then Local: RADIUS is enabled, and local authentication is enabled. Authentication is requested from the RADIUS server first; local authentication is used only if RADIUS authentication fails.
RADIUS Only: RADIUS is enabled. Local authentication is disabled.
NOTE:If RADIUS Only is selected, the only way to recover if the RADIUS server is unavailable is by using a serial connection to the control console and changing the Access setting to Local Only or RADIUS then Local.
Primary Server The server name or IP address of the main RADIUS server.
Primary Server Secret The shared secret between the primary RADIUS server and the Rack PDU.
Secondary Server The server name or IP address of the secondary RADIUS server.
Secondary Server Secret The shared secret between the secondary RADIUS server and the Rack PDU.
Timeout The time in seconds that the Rack PDU waits for a response from the RADIUS server.
Configuring the RADIUS server. You must configure your RADIUS server to work with the Rack PDU. The following example shows how to configure a RADIUS server for use with a Rack PDU. APC supports authentication and authorization of users by various RADIUS servers and does not recommend a specific RADIUS server.
1. Add the IP address of the Rack PDU to the RADIUS server client list (file).
2. The users must be configured with a Service-Type attribute. If no Service-Type attribute is configured, the user will have read-only access (on the Web interface only). There are two acceptable values for Service-Type: Administrative-User (6), which gives the user
Administrator permissions, or Login-User (1), which gives the user Device Manager permissions.
The following examples may differ somewhat from the required content or format of your specific RADIUS server.
Example: (RADIUS users file)
See also
See your RADIUS server documentation for information about the RADIUS users file.
#
UPSAdmin Auth-Type = Local, Password = "admin"
Service-Type = Administrative-User
UPSDevice Auth-Type = Local, Password = "device"
USER’S GUIDE Switched Rack PDU
3. Vendor specific attributes (VSA) can also be used. This requires some dictionary entries. VSAs take precedence over standard RADIUS attributes.
Example: (RADIUS, dictionary.apc)
Example: (RADIUS users file with VSAs)
For more information on user permission levels, see Types of user accounts.
ATTRIBUTE APC-Service-Type 1 integer APC ATTRIBUTE APC-Outlets 2 string APC
VALUE APC-Service-Type Admin 1 VALUE APC-Service-Type Device 2 VALUE APC-Service-Type ReadOnly 3 VALUE APC-Service-Type Outlet 4
VSAAdmin Auth-Type = Local, Password = "admin"
APC-Service-Type = Admin
VSADevice Auth-Type = Local, Password = "device"
APC-Service-Type = Device
VSAReadOnly Auth-Type = Local, Password = "readonly"
APC-Service-Type = ReadOnly
# Give user access to device outlets 1, 2 and 3.
VSAOutlet Auth-Type = Local, Password = "outlet"
APC-Service-Type = Outlet, APC-Outlets = "1,2,3"
Identification
Use this option to define the System Name, Contact, and Location values used by the SNMP agent for the Rack PDU. The option’s settings provide the values used for the MIB-II sysName, sysContact, and sysLocation Object Identifications (OIDs).
.