TONER SENSOR ENABLE
5.6 Printer ADMIN MENU
To display ADMIN MENU, turn on the printer while holding down the OK button.
Memo: Displaying ADMIN MENU requires entry of a password. The password defaults to six as (aaaaaa).
Category Option Settings Description C531C331/
C321
************ Enters a password for entry to ADMIN MENU. The password defaults to six as (aaaaaa). The password should be six to 12 numbers or lower-case characters.
OP
Sets whether to enable or disable all the categories of USER MENU.
DISABLE: Does not display USER MENU (except PRINT JOBS MENU.
PRINT JOBS MENU
ENABLE DISABLE
Sets whether to enable or disable the PRINT JOBS MENU category.
DISABLE: Does not display PRINT JOBS MENU.
Sets whether to enable or disable the INFORMATION MENU category.
DISABLE: Does not display INFORMATION MENU through USER MENU.
PRINT MENU ENABLE DISABLE
Sets whether to enable or disable the PRINT MENU category.
DISABLE: Does not display the
Category Option Settings Description C531C331/
C321 C511/
C301 OP
MENU
SYS CONFIG MENU
ENABLE DISABLE
Sets whether to enable or disable the SYSTEM CONFIG MENU category. The category is not displayed through USER MENU when disabled.
PCL EMULATION
ENABLE DISABLE
Sets whether to enable or disable the PCL EMULATION menu category.
DISABLE: Does not display the PCL EMULATION menu category through USER MENU.
-PPR EMULATION
ENABLE DISABLE
Sets whether to enable or disable the PPR EMULATION menu category.
DISABLE: Does not display the PPR EMULATION menu category through USER MENU.
-FX
EMULATION
ENABLE DISABLE
Sets whether to enable or disable the FX EMULATION menu category.
DISABLE: Does not display the FX EMULATION menu category through USER MENU.
-USB MENU ENABLE
DISABLE
Sets whether to enable or disable the USB MENU category.
DISABLE: Does not display the USER MENU category through USER MENU.
Category Option Settings Description C531C331/
Sets whether to accept or discard data except encrypted secure print data. The printer displays this message with an SD memory card installed.
-
-MAKE SECURE SD-M
EXECUTE Enables the encryption function for data to store an SD memory card.
This option turns on cipher key generation and encryption function (security mode) information and initializes the SD memory card.
The printer displays this message with the SD memory card installed and the secure SD card function disabled.
-
-MAKE NORMAL SD-M
EXECUTE Disables the encryption function for data to store an SD memory card.
This option turns off cipher key deletion and encryption function (security mode) information and initializes the SD card. The printer displays this message with the SD memory card installed and the secure SD card function enabled.
-
-RESET CIPHER KEY
EXECUTE Enables the encryption function, and re-generates a cipher key with use of an SD memory card.
With this processing, all data that is in the SD memory card is made unrestorable. The printer displays this message with the SD memory card installed and the secure SD card function enabled.
-
-Category Option Settings Description C531C331/
C321 C511/
C301 OP
MENU
SYS ADJUST MENU
ENABLE DISABLE
Sets whether to enable or disable the SYSTEM ADJUST MENU category.
DISABLE: Does not display the SYSTEM ADJUST MENU category through USER MENU.
MAINTE-NANCE MENU
ENABLE DISABLE
Sets whether to enable or disable the MAINTENANCE MENU category.
DISABLE: Does not display the MAINTENANCE MENU category through USER MENU.
USAGE MENU
ENABLE DISABLE
Sets whether to enable or disable the USAGE MENU category.
DISABLE: Does not display the USAGE MENU category through USER MENU.
Sets the display provided when consumables are near the end of their lives.
DISABLE: Displays no messages when a consumable is near the end of its life.
LIFE ENABLE
DISABLE
Sets whether or not to display warnings for consumable lives.
ENABLE: Displays warnings.
DISABLE: Displays no warnings.
NEARLIFE LED
ENABLE DISABLE
Sets whether or not to turn on the attention LED when consumables are near the end of their lives.
ENABLE: Turns on the attention LED.
ECO MODE ON
OFF
Sets fuser control.
ON: Makes early starts of jobs that
Category Option Settings Description C531C331/
EXECUTE Displays a list of SD memory card partition sizes. The printer displays this message with an SD memory card installed.
Each Set a percentage of partition size. These three sizes should be set to 100% in total.
-
Formats a specified partition. The printer displays this option with an SD memory card installed.
-
-FLASH INITIALIZE
EXECUTE Initializes flash memory.
FILE
EXECUTE Repairs the file system. This processing needs several tens of seconds. The printer displays this option with an SD memory card installed.
-
-CHK ALL SECTORS
EXECUTE Repairs the file system and an SD memory card. This processing needs approximately 30 minutes when the size of the SD memory card is 16 GB. The printer displays this option with the SD memory card installed.
SD CARD ENABLE
DISABLE
Sets whether or not to use an SD memory card.
ENABLE: Uses an SD memory card.
DISABLE: Uses an SD memory card.
The printer displays this option with
-
-Category Option Settings Description C531C331/
C321
Sets whether to enable or disable SD memory card and flash memory initialization.
YES: Disables changes that involve initialization. This setting does not display FILE SYS MAINTE1.
NO: Enables initialization.
LAN-GUAGE MENU
LANG INITIALIZE
EXECUTE Initializes the message file in flash memory.
PS MENU
L1 TRAY TYPE1
TYPE2
Sets the type of the tray selection number.
0 Sets Pn specified Manual by
“MANUAL-1 ID No.” FX/PPR Emu in CSF control command (ESC EM Pn)
0 Sets Pn specified Manual by
“MANUAL-2 ID No.” FX/PPR Emu in CSF control command (ESC EM Pn).
0 Sets Pn specified Tray0 (MP Tray) by “MP TRAY ID No.” FX/PPR Emu in CSF control command (ESC EM Pn).
-4
9
Sets Pn specified Tray 1 by “TRAY1
Category Option Settings Description C531C331/
C321 C511/
C301 SIDM
MENU
SIDM TRAY2 ID#
0 2
Sets Pn specified Tray 2 by “TRAY2 ID No.” FX/PPR Emu in CSF control command (ESC EM Pn).
[Display Condition]
• Tray 2 installment
• except for C321
-5
9 CHANGE
PASS-WORD
NEW PASSWORD
************ Sets a new password for entry to ADMIN MENU. The password should be set to six to 12 numbers or lower-case characters.
VERIFY PASSWORD
************ Enters for verification the password set for NEW PASSWORD.