TONER SENSOR ENABLE
5.6 Printer ADMIN MENU
To display ADMIN MENU, turn on the printer while holding down the OK button.
Memo: Displaying ADMIN MENU requires entry of a password. The password defaults to six as (aaaaaa).
Category Option Settings Description C531C331/
C321 C511/
C301 ADMIN
MENU ENTER
PASSWORD ************ Enters a password for entry to ADMIN MENU. The password defaults to six as (aaaaaa). The password should be six to 12 numbers or lower-case characters.
OP
MENU ALL
CATEGORY ENABLE
DISABLE Sets whether to enable or disable all the categories of USER MENU.
DISABLE: Does not display USER MENU (except PRINT JOBS MENU.
PRINT JOBS
MENU ENABLE
DISABLE Sets whether to enable or disable the PRINT JOBS MENU category.
DISABLE: Does not display PRINT JOBS MENU.
-
-
INFORMA-TION MENU ENABLE
DISABLE Sets whether to enable or disable the INFORMATION MENU category.
DISABLE: Does not display INFORMATION MENU through USER MENU.
PRINT MENU ENABLE
DISABLE Sets whether to enable or disable the PRINT MENU category.
DISABLE: Does not display the PRINT MENU category through USER MENU.
MEDIA
MENU ENABLE
DISABLE Sets whether to enable or disable the MEDIA MENU category.
DISABLE: Does not display the MEDIA MENU category through USER MENU.
COLOR
MENU ENABLE
DISABLE Sets whether to enable or disable the COLOR MENU category.
DISABLE: Does not display the COLOR MENU category through USER MENU.
Category Option Settings Description C531C331/
C321 C511/
C301 OP
MENU SYS CONFIG
MENU ENABLE
DISABLE Sets whether to enable or disable the SYSTEM CONFIG MENU category. The category is not displayed through USER MENU when disabled.
PCL
EMULATION ENABLE
DISABLE Sets whether to enable or disable the PCL EMULATION menu category.
DISABLE: Does not display the PCL EMULATION menu category through USER MENU.
-PPR
EMULATION ENABLE
DISABLE Sets whether to enable or disable the PPR EMULATION menu category.
DISABLE: Does not display the PPR EMULATION menu category through USER MENU.
-FX
EMULATION ENABLE
DISABLE Sets whether to enable or disable the FX EMULATION menu category.
DISABLE: Does not display the FX EMULATION menu category through USER MENU.
-USB MENU ENABLE
DISABLE Sets whether to enable or disable the USB MENU category.
DISABLE: Does not display the USER MENU category through USER MENU.
NETWORK
MENU ENABLE
DISABLE Sets whether to enable or disable the NETWORK MENU category.
DISABLE: Does not display the NETWORK MENU category through USER MENU.
MEMORY
MENU ENABLE
DISABLE Sets whether to enable or disable the MEMORY MENU category.
DISABLE: Does not display the MEMORY MENU category through USER MENU.
Category Option Settings Description C531C331/
Sets whether to accept or discard data except encrypted secure print data. The printer displays this message with an SD memory card installed.
-
-MAKE SECURE SD-M
EXECUTE Enables the encryption function for data to store an SD memory card.
This option turns on cipher key generation and encryption function (security mode) information and initializes the SD memory card.
The printer displays this message with the SD memory card installed and the secure SD card function disabled.
-
-MAKE NORMAL SD-M
EXECUTE Disables the encryption function for data to store an SD memory card.
This option turns off cipher key deletion and encryption function (security mode) information and initializes the SD card. The printer displays this message with the SD memory card installed and the secure SD card function enabled.
-
-RESET
CIPHER KEY EXECUTE Enables the encryption function, and re-generates a cipher key with use of an SD memory card.
With this processing, all data that is in the SD memory card is made unrestorable. The printer displays this message with the SD memory card installed and the secure SD card function enabled.
-
-FILE SD-M EXECUTE Puts an SD memory card back to -
-Category Option Settings Description C531C331/
C321 C511/
C301 OP
MENU SYS ADJUST
MENU ENABLE
DISABLE Sets whether to enable or disable the SYSTEM ADJUST MENU category.
DISABLE: Does not display the SYSTEM ADJUST MENU category through USER MENU.
MAINTE-NANCE MENU
ENABLE
DISABLE Sets whether to enable or disable the MAINTENANCE MENU category.
DISABLE: Does not display the MAINTENANCE MENU category through USER MENU.
USAGE
MENU ENABLE
DISABLE Sets whether to enable or disable the USAGE MENU category.
DISABLE: Does not display the USAGE MENU category through USER MENU.
DISABLE Sets the display provided when consumables are near the end of their lives.
DISABLE: Displays no messages when a consumable is near the end of its life.
LIFE ENABLE
DISABLE Sets whether or not to display warnings for consumable lives.
ENABLE: Displays warnings.
DISABLE: Displays no warnings.
NEARLIFE
LED ENABLE
DISABLE Sets whether or not to turn on the attention LED when consumables are near the end of their lives.
ENABLE: Turns on the attention LED.
ECO MODE ON
OFF Sets fuser control.
ON: Makes early starts of jobs that print a small number of pages.
Category Option Settings Description C531C331/
SIZE EXECUTE Displays a list of SD memory card partition sizes. The printer displays this message with an SD memory card installed.
Each Set a percentage of partition size. These three sizes should be set to 100% in total.
-
Formats a specified partition. The printer displays this option with an SD memory card installed.
-
-FLASH
INITIALIZE EXECUTE Initializes flash memory.
FILE SYS MAIN-TE2
CHK FILE
SYS EXECUTE Repairs the file system. This processing needs several tens of seconds. The printer displays this option with an SD memory card installed.
-
-CHK ALL
SECTORS EXECUTE Repairs the file system and an SD memory card. This processing needs approximately 30 minutes when the size of the SD memory card is 16 GB. The printer displays this option with the SD memory card installed.
SD CARD ENABLE
DISABLE Sets whether or not to use an SD memory card.
ENABLE: Uses an SD memory card.
DISABLE: Uses an SD memory card.
The printer displays this option with the SD memory card installed.
-
-SD CARD
ERASE EXECUTE Completely erases the information in an SD memory card. This option should be operated, for example, before disposal of the SD memory card. This processing needs approximately 30 seconds when the size of the SD memory card is 16 GB. The printer displays the option with the SD memory card installed.
-
-Category Option Settings Description C531C331/
C321
NO Sets whether to enable or disable SD memory card and flash memory initialization.
YES: Disables changes that involve initialization. This setting does not display FILE SYS MAINTE1.
NO: Enables initialization.
LAN-GUAGE MENU
LANG
INITIALIZE EXECUTE Initializes the message file in flash memory.
PS
MENU L1 TRAY TYPE1
TYPE2 Sets the type of the tray selection
number.
-SIDM
MENU SIDM
MANUAL ID# 0 Sets Pn specified Manual by
“MANUAL-1 ID No.” FX/PPR Emu in CSF control command (ESC EM Pn)
0 Sets Pn specified Manual by
“MANUAL-2 ID No.” FX/PPR Emu in CSF control command (ESC EM Pn).
-3
9 SIDM MP
TRAY ID# 0 Sets Pn specified Tray0 (MP Tray) by “MP TRAY ID No.” FX/PPR Emu in CSF control command (ESC EM Pn).
-4
9 SIDM TRAY1
ID# 0 Sets Pn specified Tray 1 by “TRAY1
ID No.” FX/PPR Emu in CSF control command (ESC EM Pn).
-1
9
Category Option Settings Description C531C331/
C321 C511/
C301 SIDM
MENU SIDM TRAY2
ID# 0
2
Sets Pn specified Tray 2 by “TRAY2 ID No.” FX/PPR Emu in CSF control command (ESC EM Pn).
[Display Condition]
• Tray 2 installment
• except for C321
-5
9 CHANGE
PASS-WORD
NEW
PASSWORD ************ Sets a new password for entry to ADMIN MENU. The password should be set to six to 12 numbers or lower-case characters.
VERIFY
PASSWORD ************ Enters for verification the password set for NEW PASSWORD.