My Notification registration provides email notification when firmware levels have been updated and are available for download and installation.
To register for My Notification:
1. Visit the web at http://www.ibm.com/us/.
2. Click Get Support.
3. Click My support.
Note: Library firmware and tape drive firmware are verified and released together. When updating to the latest firmware, verify that all installed components such as tape drive(s), and library are at the latest levels noted on the Support web site. Mixing different levels of library and tape drive firmware is not supported and may cause unpredictable results.
|
|
|
|
|
Chapter 5. Operations
The following table lists menu navigation shortcuts to activities that can be performed via the Operator Control Panel and/or the Web User Interface.
Before using the Operator Control Panel or the Web user Interface, please review the information in Chapter 3: User Interfaces.
Table 5-1. Menu navigation shortcuts
Information/
Activity
Menu Navigation Shortcuts
Operator Control Panel
For More
Info Web User Interface For More Info Access PIN,
create new
Configure → Set Access PIN “Configure:
Set Access PIN” on page 5-25
Configure Library → User Access
Configure → Set Access PIN “Configure:
Set Access PIN” on page 5-25
Configure Library → User Access
Monitor → Library → Status → Cycles
“Monitor:
Library” on page 5-11
Monitor Library → Library Status
Configure → Library Settings → Auto Clean
Monitor → Library → Status → Act. Cart
“Monitor:
Library” on page 5-11
Monitor Library → Library Status
Not available with this interface Monitor Library → Inventory
Monitor → Inventory → Magazines
“Monitor:
Inventory” on page 5-15
Manage Library → Perform Inventory
“Manage Library: Perform Inventory” on page 5-40 Cartridge, Move Control → Move Cartridges “Control:
Move Cartridges”
on page 5-17
Manage Library → Move Media
Monitor → Inventory → Drive (n)
“Monitor:
Inventory” on page 5-15
Monitor Library → Drive Status
“Monitor Library: Drive Status” on page 5-35
Table 5-1. Menu navigation shortcuts (continued)
Info Web User Interface For More Info Cartridge in drive
(n), serial number
Monitor → Drive → Status → Drive (n)/Source
“Monitor:
Drive” on page 5-13
Monitor Library → Drive Status
Configure → Restore Defaults “Configure:
Restore Defaults” on page 5-25
Configure Library → Restore Defaults
“Configure Library: Restore Defaults” on page 5-52
* Note:From this location, you can not only restore factory defaults but save and restore your library configuration from the RMU or OCP.
Control path, enable
Configure → Drive → Control Paths
“Configure:
Drive” on page 5-23
Configure Library → Drive “Configure Library: Drives”
on page 5-46 Date and time,
current setting
Monitor → Library → Identity → Date/Time
“Monitor:
Library” on page 5-11
Monitor Library → Library Identity
Configure → Set Date and Time “Configure:
Set Date and Time” on page 5-27
Configure Library → Date &
Time
Configure → Library Settings “Configure:
Library” on page 5-20
Not available with this interface
DHCP, current status
Monitor → Library → Network → DHCP DHCP, modify Configure → Network → DHCP “Configure:
Network” on
Service → Service → Drive Tests “Service: Run Tests” on page 5-29
Service Library → Perform Diagnostics
Service → Service → Drive Tests “Service: Run Tests” on page 5-29
Service Library → Perform Diagnostics
Service → Service → Drive Tests “Service: Run Tests” on page 5-29
Service Library → Perform Diagnostics
Service → Service → Drive Tests “Service: Run Tests” on page 5-29
Service Library → Perform Diagnostics
Table 5-1. Menu navigation shortcuts (continued)
Info Web User Interface For More Info Diagnostics, run
drive wrap test
Service → Service → Drive Tests “Service: Run Tests” on page 5-29
Service Library → Perform Diagnostics
Not available with this interface Service Library → Perform Key Path Diagnostics
Service → Library Verify “Service:
Library Verify” on page 5-28
Not available with this interface.
Diagnostics, run Slot to Slot test
Service → Run Tests “Service: Run Tests” on page 5-29
Service Library → Perform Diagnostics
Service → Run Tests “Service: Run Tests” on page 5-29
Service Library → Perform Diagnostics
“Service Library:
Perform Diagnostics” on page 5-56 Display Contrast Service → Display Contrast “Service:
Display Contrast” on page 5-30
Not available with this interface.
DNS, modify settings
Not available with this interface.
Configure → Drive → Drive Interface
“Configure:
Drive” on page 5-23
Configure Library → Drives “Configure Library: Drives”
on page 5-46 Drive, change
encryption
Not available with this interface Configure Library → Encryption
“Configure Library:
Encryption” on page 5-43 Drive, clean Service → Service → Clean
Drive
“Service:
Service (Drives)” on page 5-29
Service Library → Clean Drive
Monitor → Drive → Identity “Monitor:
Drive” on page 5-13
Monitor Library → Drive Identity
Monitor → Drive → Status “Monitor:
Drive” on page 5-13
Monitor Library → Drive Status
Table 5-1. Menu navigation shortcuts (continued)
Info Web User Interface For More Info Drive, data
compression ON/OFF
Not available with this interface.
Monitor Library → Drive Identity → Data
Monitor → Drive → Identity → Drive (n)/WWNN
“Monitor:
Drive” on page 5-13
Monitor Library → Drive Status
Not available with this interface.
Monitor Library → Drive Status → Hashed SAS Address
Configure → Drive → Drive Interface
“Configure:
Drive” on page 5-23
Configure Library → Drive “Configure Library: Drives”
on page 5-46 Drive, SCSI
Inquiry string
Monitor → Drive → Identity → Drive (n)/Product ID
“Monitor:
Drive” on page 5-13
Monitor Library → Drive Identity
Service → Service → Drive Power
“Service:
Service (Drives)” on page 5-29
Configure Library → Drive “Configure Library: Drives”
on page 5-46
Drive activity, current
Monitor → Drive → Status → Drive (n)/Activity
“Monitor:
Drive” on page 5-13
Monitor Library → Drive Status
“Monitor Library: Drive Status” on page 5-35
Drive fan, status Monitor → Drive → Status → Drive (n)/Cooling
“Monitor:
Drive” on page 5-13
Monitor Library → Drive Status
Not available with this interface.
Service Library → Save Drive Dump
Not available with this interface.
Not available with this interface.
Not available with this interface.
Service Library → Perform Key Path Diagnostics
Table 5-1. Menu navigation shortcuts (continued)
Info Web User Interface For More Info Encryption,
determine method, current method
Not available with this interface.
Monitor Library → Drive Status → Encryption method
“Monitor Library: Drive Status” on page 5-35
Ethernet settings Configure → Drive → Ethernet Configure Library → Ethernet
Event
notifications: add, modify, and delete
Not available with this interface.
Configure Library → Event Notification
“Configure Library: Event Notification” on page 5-52 Error log, view Monitor → Library → Error log “Monitor:
Library” on page 5-11
Service Library → View logs “Service Library:
View Logs” on page 5-54 Error logs and
traces, set mode
Not available with this interface Configure Library → Logs &
Traces
Configure → Restore Default “Configure:
Restore Defaults” on page 5-25
Configure Library → Restore Defaults
Monitor → Drive → Status → Drive (n)/Speed
“Monitor:
Drive” on page 5-13
Monitor Library → Drive Status
Monitor → Drive → Status → Drive (n)/Topology
“Monitor:
Drive” on page 5-13
Monitor Library → Drive Status
Monitor → Drive → Status → Drive (n)/Link
“Monitor:
Drive” on page 5-13
Monitor Library → Drive Status
Monitor → Drive → Identity “Monitor:
Drive” on page 5-13
Monitor Library → Drive Identity
Monitor → Library → Identity “Monitor:
Library” on page 5-11
Monitor Library → Library Identity
Not available with this interface.
Service Library → Upgrade Firmware
Monitor → Library → Network → Gateway
Table 5-1. Menu navigation shortcuts (continued)
Info Web User Interface For More Info Gateway
Address, modify
Configure → Network → Gateway
Control → Re-Inventory “Control:
Re-Inventory”
on page 5-18
Manage Library → Perform Inventory
Configure → Library Settings “Configure:
Library” on
Monitor → Library → Status “Monitor:
Library” on page 5-11
Monitor Library → Library Status
“Monitor Library: Library Status” on page 5-34
I/O Station, open Control → Open I/O Station “Control:
Open I/O Station” on page 5-17
Not available with this interface
IP Address, current
Monitor → Library → Identity “Monitor:
Library” on page 5-11
Monitor Library → Library Identity
Configure → Network → IP Address
Monitor → Library → Status “Monitor:
Library” on page 5-11
Monitor Library → Library Status
Configure → Logical Libraries “Configure:
Logical Libraries” on page 5-19
Configure Library → Logical Libraries
Monitor → Library → Error Log “Monitor:
Library” on page 5-11
Service Library → View Logs “Service Library:
View Logs” on page 5-54 Magazines,
graphical representation
Monitor → Inventory → Magazines
Control → Magazines “Control:
Magazine” on page 5-17
Manage Library → Release Magazine
Table 5-1. Menu navigation shortcuts (continued)
Info Web User Interface For More Info Mode, library,
change
Configure → Library Settings → Mode
Monitor → Library → Identity “Monitor:
Library” on page 5-11
Monitor Library → Library Identity
Monitor → Library → Network → Netmask
Configure → Network → Netmask
Configure → Network “Configure:
Network” on
Monitor → Library → Network “Monitor:
Library” on
Configure → Path Failover “Configure:
Path Failover” on page 5-27
Configure Library → Path Failover
“Configure Library: Path Failover” on page 5-43 Power cycles Monitor → Library → Status “Monitor:
Library” on page 5-11
Monitor Library → Library Status
“Monitor Library: Library Status” on page 5-34
Restart, library, Not available with this interface.
Service Library → Reboot “Service Library:
Reboot” on page 5-59
SCSI Inquiry string, library
Monitor → Library → Identity “Monitor:
Library” on page 5-11
Monitor Library → Library Identity
Monitor → Drive → Identity “Monitor:
Drive” on page 5-13
Monitor Library → Drive Identity
Monitor → Library → Identity “Monitor:
Library” on page 5-11
Monitor Library → Library Identity
“Monitor Library: Library Identity” on page 5-31
Table 5-1. Menu navigation shortcuts (continued)
Info Web User Interface For More Info Slots, number
active
Monitor → Library → Identity → Active Slots
“Monitor:
Library” on page 5-11
Monitor Library → Library Identity
Monitor → Library → Status → Slots Empty
“Monitor:
Library” on page 5-11
Monitor Library → Library Status
Configure → Library Settings → Active Slots
Not available with this interface.
Service → Telnet Service Port “Service:
Telnet Service Port” on page 5-30
Not available with this interface.
Time elapsed since power ON
Monitor → Library → Status “Monitor:
Library” on page 5-11
Monitor Library → Library Status
Configure → Set Access PIN “Configure:
Set Access PIN” on page 5-25
Not available with this interface.
Web User Interface, user access, create or modify
Not available with this interface.
Configure Library → User Access
“Configure Library: User Access” on page 5-50