Replacing the Licensed Programs

Stage 2 | XX % |

+---+

Installation Objects

Stage Completed Restored

1 Creating needed profiles and libraries . . . . : X

>> 2 Restoring programs to library QSYS . . . : XXXXX 3 Restoring language objects to library QSYS . . :

4 Updating program table . . . : 5 Installing database files. . . : 6 Completing OS/400 installation . . . :

__ 7. The display may be blank for a long time. Then the Installation Status screen appears again with the indicator pointing to stage 5.

__ 8. After the base operating system has been replaced, the Sign On display appears on your console.

Continue with Task 3. Replacing the Licensed Programs.

Task 3. Replacing the Licensed Programs

__ 1. Begin this task at the Sign On display.

Sign On

System. . . : XXXX Subsystem . . . . : XXXX Display . . . : XXXXXXXX User. . . . QSECOFR

Password . . . .

Program/procedure . . . . ________

Menu . . . . ________

Current library . . . . ________

Type the following:

User: QSECOFR

Password: (Enter password, if required.) Press Enter.

__ 2. The IPL Options display appears.

Replacing a Release Using Manual Installation

IPL Options Type choices, press Enter.

System date . . . XX / XX / XX MM / DD / YY System time . . . XX : XX : XX HH : MM : SS Clear job queues. . . N Y=Yes, N=No Clear output queues . . . N Y=Yes, N=No Clear incomplete job logs . . . N Y=Yes, N=No Start print writers . . . Y Y=Yes, N=No Start system to restricted state . . . . N Y=Yes, N=No Set major system options. . . N Y=Yes, N=No Define or change system at IPL. . . N Y=Yes, N=No

Last power-down operation was ABNORMAL

Notes:

a. Ignore the message on the bottom of the IPL Options display.

b. If you need to change system values, such as the value for the

QSECURITY system value, you can do so now. Type Y for the Define or change the system at IPL prompt. Follow the instructions on the displays.

Type the following:

System date (Use the current date.)

System time (Use the current time, 24-hour clock.) Set major system options N

Press Enter.

__ 3. The Edit Rebuild of Access Paths display could be shown. If it is, press Enter to continue.

__ 4. Additional display messages could be shown.

Press Enter after each message to continue.

__ 5. The AS/400 Main Menu (or the menu you chose as an initial menu) appears on your console.

Do the following to put the system in a restricted state and filter the messages that appear:

a. Type: CHGMSGQ QSYSOPR *BREAK SEV(60) Press Enter.

b. A message display could appear. Press Enter.

c. Type: ENDSBS *ALL *IMMED Press Enter.

d. When the following message appears, press Enter to continue:

ENDSBS SBS(*ALL) command being processed

e. The message System ended to restricted condition appears. Press Enter to continue.

f. Type: CHGMSGQ QSYSOPR SEV(95) Press Enter.

g. A message display could appear. Press Enter.

__ 6. The AS/400 Main Menu (or the menu you chose as an initial menu) appears on your console.

Load the media volume that contains optional parts of OS/400. B29xx_02 is the volume label, where 29xx indicates the identifier for primary language.

Type: GO LICPGM. Press Enter.

Replacing a Release Using Manual Installation

__ 7. The Work with Licensed Programs display appears.

LICPGM Work withLicensed Programs

System: XXXX Select one of the following:

Manual Install 1. Install all

Type 1, and press Enter.

__ 8. The Manual Install display appears.

Manual Install

System: XXXX Type choices, press Enter.

Install option . . . 1 1=Installed products 2=All products 3=New products

Installation device OPT01 Name Replace if current N Y=Yes

N=No Automatic IPL . . . N Y=Yes

N=No

Type the following:

Install option 1 (See note)

Installation device OPT01 (See note) Replace if current N

Automatic IPL N Press Enter.

Note: In this example, the installation device is OPT01. If you use a

different naming convention, type the name that you have assigned to the installation device.

__ 9. Status displays may appear. These displays show the status of the licensed programs and language objects as they install on the system. You do not need to respond to these status displays.

Installing Licensed Programs

System: XXXX

Licensed programs processed . . . : 0 of XXX Licensed program install in progress

The following display is an example of the display that appears during the installation process.

Replacing a Release Using Manual Installation

Installing Licensed Programs

System: XXXX Licensed programs processed . . . : X of XXX Licensed

Program Option Description Type

5769SS1 2 OS/400 - Online Information 2924

Note: This display shows which licensed programs and optional parts of licensed programs are being processed. After the *PGM objects and

*LNG objects are processed, the display shows the total number of licensed programs processed.

__ 10. If a message similar to the following appears, load the next media volume that contains licensed program products, and continue the installation.

When you are installing from optical media, wait for the In Use indicator to go out before you respond to the message.

Display Messages

System: XXXX Queue . . . : QSYSOPR Program . . . . : *DSPMSG

Library . . . : QSYS Library . . . :

Severity . . . . : 95 Delivery . . . : *BREAK Type reply (if required), press Enter.

Load the next volume in optical device OPT01 (X G) Reply . . . . G

Type G Note:

Type G, and press Enter after loading the next volume, if you wish to continue processing.

Type X, and press Enter, if there are no more volumes to load that contain licensed programs, or if you wish to terminate the loading process.

Press Enter.

__ 11. The Work with Licensed Programs display appears on your console when the installation process completes. One of the following messages appears on the bottom of the Work with Licensed Programs display:

v Work withlicensed programs function has completed.

v Work withlicensed programs function not complete.

For either message, continue with Task 4. Verifying Completion of Manual Replacement.