Further Research on AFR Control Methods

Further improvement of neural control training strategy or developing hybrid control method to narrowing the control settling time are still desirable. An in-depth study of intake charge/discharge effect and the development of compensation measures in training process could improve the performance further. The model reference and model predictive control methods can be exploited with efficient optimization procedures.

177

References

Abdi, J., Khalili, A. F., Inanlosaremi, K., Askari, A. (2011) ‘Air fuel ratio control in spark injection engines based on neural network and model predictive controller’,

Australian Control Conference (AUCC), Melbourne, pp.142-147.

Agrawal, A. K., Singh, S. K., Sinha, S., Shukla, M. K. (2004) ‘Effect of EGR on the exhaust gas temperature and exhaust opacity in compression ignition engines’,

Sadhana, 29(3), pp. 275-284.

Ahmed, Q., Bhatti, A. I. (2010) ’Estimating SI engine efficiencies and parameters in second order sliding modes’, IEEE Transactions on Industrial Electronics, 57(12), pp.1–9.

Akbiyik, B., Eksin I., Guzelkaya M., Yesil, E. (2005) ‘Evaluation of the performance of various fuzzy PID controller structures on benchmark systems’, 4rd International

Conference on Electrical and Electronics Engineering, Bursa, Turkey, pp.388-393.

Aken, M. V., Willems, F., Jong, D. D. (2007) ‘Appliance of high EGR rates with a short and long route EGR system on a heavy duty diesel engine’, SAE Paper 2007-01-0906.

Alippi, C., Russis, C.D., Piuri, V. (1998) ’A fine control of the air-to-fuel ratio with recurrent neural networks’, IEEE Proceeding Instrumentation and Measurement

Technology Conference, St. Paul, 2, pp.924-929.

Alippi, C., Russis, C.D., Piuri, V. (2003) ’A neural-network based control solution to air-fuel ratio control for automotive fuel-injection systems’, IEEE Transactions Systems,

Man, and Cybernetics, Part C: Applications and Reviews, 33( 2), pp. 259-268.

Aquino, C. (1981) ‘Transient A/F control characteristics of a 5 liter central fuel injection engine’, SAE Paper 810494.

Arsie, I., Pianese, C., Rizzo, G., Cio, V. (2003) ‘An adaptive estimator of fuel film dynamics in the intake port of a spark ignition engine’, Control Engineering Practice,

178 11(3), pp.303-309.

Ault, B. A., Jones, V. K., Powell, J. D., Franklin, G. F. (1994) ’Adaptive air-fuel ratio control of a spark-ignition engine’, SAE Paper 940373.

AVL Product Description Cruise, (2009), AVL – Advanced Simulation Technologies GmbH,

Balluchi, A., Benvenuti, L., Benedetto, M. D., Cardellino, S., Rossi, C., Sangiovanni- Vincentelli, A. L. (1999) ‘Hybrid control of the air-fuel ratio in force transients for multi-point injection engines’, Proceedings of the 38th IEEE Conference on Decision and Control, Phoenix, 1(1), pp.316 – 321.

Barry. (1998) Air-fuel ratio and the SRF air-fuel curve. Available at: http://www.mummbrothers.com/SRF_Stuff/Secrets/Driveline/Air_Fuel.htm, [Accessed 9th September 2013].

Baruah, P. C. (1990) ’A Simulation Model for Transient Operation of Spark-Ignition Engines’, SAE Paper 900682.

Bayraktar, H., Durgun, O. (2003) ‘Mathematical modelling of spark-ignition engine cycles’, Energy Sources, 25(5), pp.439-455.

Benninger, N. F., Plapp, G. (1991) ’Requirements and performance of engine management systems under transient conditions’, SAE paper 910083.

Blanchett, T. P., Kember, G. C., Dubay, R. (2000) ‘PID gain scheduling using fuzzy logic’, ISA Transactions, 39(3), pp.317-325.

Brunt M., Pond C., Biundo J. (1998) ‘Gasoline engine knock analysis using cylinder pressure data’, SAE Paper 980896.

Broomhead, D. S., Lowe, D. (1988), ‘Multivariate functional interpolation and adaptive networks’, Complex Systems, 2, pp.321-355.

179

Cairano, S. D., Yanakiev, D., Bemporad, A., Kolmanovsky, I. V., Hrovat, D. (2011) ‘Model predictive idle speed control: design, analysis, and experimental evaluation’,

IEEE Transactions on Control Systems Technology, 20(1), pp.84-97.

Carpenter, M. H., Ramos, J. I. (1985) ‘Mathematical modelling of spark-ignition engines’, Applied Mathematical Modelling, 9(1), pp.40-52.

Ceviz, M. A., Akin, M. (2010) ‘Design of a new SI engine intake manifold with variable length plenum’, Energy Conversion and Management, 51(11), pp.2239–2244.

Ceviz, M. A. (2007) ‘Intake plenum volume and its influence on the engine performance, cyclic variability and emissions’, Energy Conversion and Management,

48(3), pp.961–966.

Chan, K. Y., Ordys, A., Volkov, K., Duran, O. (2013) ‘Comparison of engine simulation software for development of control system’, Modelling and Simulation in Engineering

Volume 2013.

Chandra, R., Jha, A., Laxmi, A. V. (2013) ‘Performance of diesel engine using exhaust gas recirculation’, International Journal of Advanced Trends in Computer Science and

Engineering, 2(1), pp.433 – 436.

Chang, R. T. (1988), A modelling study of the influence of spark-ignition engine design

parameters on engine thermal efficiency and performance. Ph.D. thesis, MIT.

Chang, C. F., Fekete, N. P., Amstutz, A., Powell, J. D. (1995) ‘Air/fuel ratio control in spark-ignition engines using estimation theory’, IEEE Transactions on Control Systems

Technology, 3(1), pp.22-31.

Chang, C. F., Fekete, N. P., Powell, J. D. (1993) ‘Engine air-fuel ratio control using an event-based observer’, SAE Paper 930766.

Chen, G., Ying, H. (1993) ’Stability analysis of nonlinear fuzzy PI control systems’,

Third International Conference on Industrial Fuzzy Control and Intelligent Systems,

180

Choi, S. B., Won, M., Hendrick, J. K. (1994) ’Fuel-injection control of SI engines’,

Proceedings of the 33rd IEEE Conference Decision and Control, Lake Buena Vista, 2,

pp.1609-1614.

Choi, S. B., Hendrick, J. K. (1998) ’An observer-based controller design method for improving air/fuel characteristics of spark ignition engines’, IEEE Transactions on

Control Systems Technology, 6(3), pp.325–334.

DieselNet. (2013), Emission Standards - Summary of worldwide engine emission standards. Available at: http://www.dieselnet.com/standards/, [Accessed 9th September 2013].

Cook, J. A., Powell, B. K. (1988) ‘Modelling of an internal combustion engine for control analysis’, IEEE Control Systems Magazine, 8(4), pp.20-26.

Coleman, T., Branch, M. A., Grace, A. (1999) Optimization toolbox for use with MATLAB. The MathWorks, Inc.

Czarnigowski, J. (2010) ‘A neural network model-based observer for idle speed control of ignition in SI engine’, Engineering Applications of Artificial Intelligence, 23(1), pp.1- 7.

Dobner, D.J. (1980) ‘A review of ic engine models for development of dynamic engine control’, SAE Paper 800054.

Ebrahimi, B., Tafreshi, R., Masudi, H., Franchek, M., Mohammadpour, J., Grigoriadis, K., Tafreshi, R. (2012) ’A parameter-varying filtered PID strategy for air-fuel ratio control of spark ignition engines’, Control Engineering Practice, 20(8), pp.805-815. Falk, C. D., Mooney, J. J. (1998) ’Three-way Conversion Catalysts: Effect of Closed- Loop Feed-Back Control and Other Parameters on Catalyst Efficiency’, SAE Paper 800462.

Ferguson, C. R., Kirkpatrick, A. T. (2001) International combustion engines: applied

181

Filippi, R. D., Scattolini, R. (2005) ‘Idle speed control of a F1 racing engine’, Control

Engineering Practice, 14(3), pp. 251–257.

Franceschi, E. M., Mucke, R. K., Jones, C. P., Makki, I. (2007) ’An adaptive delay- compensated PID air fuel ratio controller’, SAE Paper 2007-01-1342.

Franchek, M. A., Mohrfeld, J., Osburn, A. (2006) ’Transient fueling controller identification for spark ignition engines’, ASME Journal of Dynamic Systems,

Measurement, and Control, 128(3), pp.499-509.

Franklin, G. F., Powell, J. D., Naeini, A. E. (2009) Feedback control of dynamic

systems. 6th edn. United States: Prentice Hall

Freij, K. B., Ericsson, E. (2005) ‘Influence of street characteristics, driver category and car performance on urban driving patterns’, Transportation Research Part D: Transport

and Environment, 10(3), pp.213-229.

Foley, J., Fergusson, M. (2003) Putting the brakes on climate change: A policy report

on road transport and climate change. London: Institute for Public Policy Research

Ganesan, V. (2008) International combustion engines. 3rd edn. Singapore: Tata McGraw-Hill.

Gangopadhyay, A., Meckl, P. (1999) ‘Multivariable PI tuning and application to engine idle speed control’, Proceedings of American Control Conference, San Diego, 4, pp. 2678–2682.

Gao, S., Lang, H., Tan, D. R., Shao, J. J. (2011) ‘Study on air-fuel ratio control of coal- bed gas engine based on fuzzy PID control’, Remote Sensing, Environment and

Transportation Engineering, pp.1624-1627.

Ge, Z.X., Sun, Z.Q. (2007), Neural network apply with Matlab R2007, Beijing: Publishing house of electronics industry.