Check Reverse Print to rotate the data by 180 degrees.
Advancedtab
Color Mode
You can change the color mode as follows: • Normal
This is the Default color mode. • Vivid
The color of all elements are adjusted to become a more vivid color. • None
Enhance Black Printing
If a black graphic cannot be printed correctly, choose this setting.
Improve Gray Color
You can improve the image quality of shaded areas by checking the Improve Gray Color check box.
Skip Blank Page
If Skip Blank Page is checked, the printer driver automatically detects blank pages and excludes them from printing.
Improve Print Output...
This feature allows you to improve a print quality problem. • Reduce Paper Curl
2
If you are printing only a few pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin setting.
Note
This operation makes the temperature of the machine’s fusing process lower. • Improve Toner Fixing
If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide enough improvement, change the printer driver setting in Media type to a thick setting.
Note
This operation makes the temperature of the machine’s fusing process higher.
Sleep Time
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode, the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will be reset to the specific time set at the factory; this can be altered in the driver or at the machine. If you want to change the sleep time, choose Manual and then enter the time in the text box on the driver. While the machine is in sleep mode, the LCD shows Sleep, but the machine can still receive data.
2
Manual Duplex Printing
2For Mac OS X 10.4.11
a
Select Paper Handling.b
Choose Reverse (for MP tray) or Normal (for Tray 1 and Tray 2) in Page Order. Then chooseEven numbered pages and click Print.
c
Reload printed paper into the tray with the blank side facing up (for MP tray) or facing down (for Tray 1 and Tray 2).d
Choose Normal in Page Order. Then choose Odd numbered pages and click Print.For Mac OS X 10.5.x and 10.6.x
a
Select Paper Handling.b
Choose Reverse (for MP tray) or Normal (for Tray 1 and Tray 2) in Page Order. Then chooseEven Only in Pages To Print and click Print.
c
Reload printed paper into the tray with the blank side facing up (for MP tray) or facing down (for Tray 1 and Tray 2).2
Automatic Duplex Printing
2For Mac OS X 10.4.11
a
Select Layout.b
Choose Long-edged binding or Short-edged binding in Two-Sided.c
Select Paper Handling.2
For Mac OS X 10.5.x and 10.6.xa
Select Layout.b
Choose Long-edge binding or Short-edge binding in Two-Sided. Automatically the Two-Sidedcheck box is checked.
c
Select Paper Handling.2
Status Monitor
2This reports the machine status (any errors that may happen with the machine) when printing. If you would like to turn Status Monitor on, follow these steps:
For Mac OS X 10.4.11
a
Run the Printer Setup Utility (from the Go menu, choose Applications, Utilities), then choose the machine.b
Click the Utility, then Status Monitor will start up.For Mac OS X 10.5.x
a
Run the System Preferences, select Print & Fax, then choose the machine.b
Click the Open Print Queue..., then click Utility. Status Monitor will start up.For Mac OS X 10.6.x
a
Run the System Preferences, select Print & Fax, then choose the machine.b
Click the Open Print Queue..., then click Printer Setup. Select the Utility tab then click Open Printer Utility. Status Monitor will start up.2
Uninstalling the printer driver
2You can uninstall the printer driver that you have installed with the following steps.
Note
• This is not available if you installed the printer driver from the Windows Add printer1 function.
• After uninstalling, we recommend that you restart your computer to remove files that were in use during the uninstall.
1 Add a printer for Windows® 7 and Windows Server® 2008 R2 users
Printer driver for Windows
® 2a
Click the Start button, point to All Programs1, Brother, and then to your machine name.b
Click UnInstall.c
Follow the instructions on the screen.1 Program for Windows® 2000 users
Printer driver for Macintosh
2For Mac OS X 10.4.11 2
a
Log in as an ‘Administrator’.b
Run the Printer Setup Utility (from the Go menu, choose Applications, Utilities), then choose the printer you want to remove and remove it by clicking the Delete button.For Mac OS X 10.5.x and 10.6.x 2
a
Log in as an ‘Administrator’.b
From the Apple menu, choose System Preferences. Click Print & Fax, then choose the printer you want to remove and remove it by clicking the - button.c
Click OK1.1 Delete Printer for Mac OS X 10.6.x users