3 Ring Piston For Standard Compression Engines with Pistons Marked RE1

Sleeve & piston kit. Contains sleeves, pistons, rings, pins & retainers.

PKD461

Piston ring set, 4.19" bore. 1 @ 1/8" keystone, 1 @ 3/32", 1 @ 9/64"

PRSD461

Piston Pin Bushings

REPLACES

Bushing, piston pin, for 1-3/8" O.D. piston pin (4 used per engine)

TP-R55647

Gaskets & Gasket Sets

REPLACES

Gasket set, complete/overhaul (with crankshaft seals)

FS3900

Gasket set, head HS3900

Oil pan gasket TP-R97342

Crankshaft Seals

REPLACES

Seal, crankshaft, front TP-AR67942

Seal, crankshaft & sleeve, rear TP-AR92893

Balancer Shaft Bushings

REPLACES

Bushing, balancer shaft (6 used per engine) 1.505" ID, 1.625" OD, 1.090" Wide

TP-R57160

239 CID 4 Cylinder Diesel

Standard Bore 4.19"

•

3 Ring Piston For Standard Compression Engines with Pistons Marked

RE19282

•

Piston pin 1-3/8" dia.

•

Check and Add Rod Bolts

Valves & Valve Parts

REPLACES

Valve overhaul kit. Contains intake & exhaust valves, valve caps, springs, and keys. VOKD202

Valve, engine intake, standard (4 used per engine)

TP-R79623

Valve, engine exhaust, standard (4 used per engine)

TP-R79624

Cap, valve stem (8 used per engine) TP-T20129

Spring, intake & exhaust valve (8 used per engine)

TP-R26125

Valve keys (16 used per engine) TP-T20077

Connecting Rod Bolts

REPLACES

Bolt, connecting rod with casting number T20007, R51727, or R58979. Check casting number before ordering. 2.125" long. TP-R74194

Bolt, connecting rod with casting number R80032, R80034, R81410, or R113612. Check casting number before ordering. 2.325" long. TP-R80033

Connecting Rod Bearings

4 used per engine

REPLACES

Rod bearing, standard TP-AT21138 Rod bearing, .010" TP-AT21124 Rod bearing, .020" TP-AT21126 Rod bearing, .030" TP-AT21128

Main Bearing Kit

1 kit used per engine

REPLACES

Main bearing kit, standard. Replaces 1 - AT21139 & 4 - AT21140

MBK1444

Main bearing kit, .010". Replaces 1 - AT21132 & 4 - AT21110

MBK1444-010

Main bearing kit, .020". Replaces 1 - AT21134 & 4 - AT21112

MBK1444-020

Main bearing kit, .030". Replaces 1 - AT21136 & 4 - AT21114

MBK1444-030

239 CID 4 Cylinder Diesel

Standard Bore 4.19"

•

3 Ring Piston For Standard Compression Engines with Pistons Marked

RE19282

•

Piston pin 1-3/8" dia.

•

Check and Add Rod Bolts

TRU-POWER Engine Kits

REPLACES

Basic engine kit. Contains sleeves, pistons, rings, pins, pin bushings, overhaul gasket set with crankshaft seals, and rod bolts.

BEKD4462-LCB

Engine overhaul kit. Contains sleeves, pistons, rings, pins, pin bushings, overhaul gasket set with crankshaft seals, rod bolts, valves, valve caps, springs, and keys.

EOKD4462-LCB

Basic in-frame kit. Contains sleeves, pistons, rings, pins, valve grind gasket set, and oil pan gasket kit.

BIFD4462

REPLACES

_{Sleeve and Piston Kit}

Complete for 4 cylinders

(1 used per engine)

For standard compression engines with pistons marked RE19278

Sleeve & piston kit. Contains sleeves, 3 ring pistons, rings, 1-5/8" O.D. pins & retainers. For 4.19" bore.

PKD462

Piston ring set, 4.19" bore. 1 @ 1/8" keystone, 1 @ 3/32", 1 @ 9/64"

PRSD461

Piston Pin Bushings

REPLACES

Piston pin bushing, for 1-5/8" O.D. piston pin (4 used per engine)

TP-R57451

Gaskets & Gasket Sets

REPLACES

Gasket set, complete/overhaul (with crankshaft seals)

FS3900

Gasket set, head HS3900

Oil pan gasket TP-R97342

Crankshaft Seals

REPLACES

Seal, crankshaft, front TP-AR67942

Seal, crankshaft, rear with wear sleeve (engine s/n 036138 & up)

TP-AR92893

Seal, crankshaft & sleeve, rear

Balancer Shaft Bushings

REPLACES

Bushing, balancer shaft (6 used per engine) 1.505" ID, 1.625" OD, 1.090" Wide

TP-R57160

239 CID 4 Cylinder

Standard Bore 4.19"

•

3 Ring Piston For Standard Compression Engines with Pistons Marked

RE19278

•

Piston pin 1-5/8" dia.

•

Check and add rod bolts

Valves & Valve Parts

REPLACES

Valve overhaul kit. Contains intake & exhaust valves, valve caps, springs, and keys. VOKD239T

Valve, engine intake, standard (4 used per engine)

TP-R89219

Valve, engine exhaust, standard (4 used per engine)

TP-R79624

Cap, valve stem (8 used per engine) TP-T20129

Spring, intake & exhaust valve (8 used per engine)

TP-R26125

Valve keys (16 used per engine) TP-T20077

Connecting Rod Bolts

REPLACES

Bolt, connecting rod with casting number T20007, R51727, or R58979. Check casting number before ordering. 2.125" long. TP-R74194

Bolt, connecting rod with casting number R80032, R80034, R81410, or R113612. Check casting number before ordering. 2.325" long. TP-R80033

Connecting Rod Bearings

4 used per engine

REPLACES

Rod bearing, standard TP-AT21138 Rod bearing, .010" TP-AT21124 Rod bearing, .020" TP-AT21126 Rod bearing, .030" TP-AT21128

Main Bearing Kit

1 kit used per engine

REPLACES

Main bearing kit, standard. Replaces 1 - AT21139 & 4 - AT21140

MBK1444

Main bearing kit, .010". Replaces 1 - AT21132 & 4 - AT21110

MBK1444-010

Main bearing kit, .020". Replaces 1 - AT21134 & 4 - AT21112

MBK1444-020

Main bearing kit, .030". Replaces 1 - AT21136 & 4 - AT21114

MBK1444-030

239 CID 4 Cylinder

Standard Bore 4.19"

•

3 Ring Piston For Standard Compression Engines with Pistons Marked

RE19278

•

Piston pin 1-5/8" dia.

•

Check and add rod bolts

TRU-POWER Engine Kits

REPLACES

Basic engine kit. Contains sleeves, pistons, rings, pins, pin bushings, overhaul gasket set with crankshaft seals, and rod bolts.

BEKD3431-3-LCB

Engine overhaul kit. Contains sleeves, pistons, rings, pins, pin bushings, overhaul gasket set with crankshaft seals, rod bolts, valves, guides, springs, and keys.

EOK3431-3-LCB

Basic in-frame kit. Contains sleeves, pistons, rings, pins, valve grind set, oil pan gasket kit, and rod bolts.

BIFD3431-3

Sleeve and Piston Kit

Complete for 4 cylinders (1 used per engine)

REPLACES

Sleeve & piston kit. Contains sleeves, 3 ring pistons, rings, pins & retainers. For 4-1/4" bore. PK4409

Piston Ring Set, 4-1/4" bore. 1 @ 1/8" keystone, 1 @ 3/32", 1 @ 1/4" (1 used per engine) PRS4409

Piston Pin Bushings

REPLACES

Bushing, piston pin (4 used per engine) TP-R30939

Gaskets & Gasket Sets

REPLACES

Gasket set, complete/overhaul (with crankshaft seals)

FS3217W

Gasket set, head HS3217VX

Gasket, oil pan TP-R71917

Crankshaft Seals

REPLACES

Seal, crankshaft, front (with sleeve). Replaces SS47407

TP-AR49025

Seal, crankshaft, rear (with sleeve). Replaces AR63095, SS46829

TP-RE17352

Cam Bearings

REPLACES

Bearing kit, camshaft (1 used per engine) CBK-D434

Block # R26160 Only

In document Replacement parts to fit JOHN DEERE CONTENTS. Important Ordering Information (Page 44-48)