Night Weekend Keyswitch Holiday
Timed On Off None Edit
Zone Control, Timed On Between, 7 Day Timer, Off, On On Between, Off Direct, Aux, Module 1-16, None
Schedule
Schedule type
This determines how the schedule will operate, the options available are:
• Timed (default) - allows settings to be configured for set times during the day, night and weekend, and enables or disables the Keyswitch and �olidays options.
• Zone Control - This enables or disables Night Zone or Weekend Zone settings.
Note: Enabling Zone Control will override any timed Schedule setting and will switch into Night or Weekend mode when an alarm is activated. Refer to Zone Configuration for more information.
Night
The Night option allows times to be configured to determine when the night settings would be applied.
The options are:
• On - Night settings would be permanently applied.
• 7 Day Timer - This activates a sub menu where Day and Night times can be allocated, refer to the 7 Day Timer section.
• On between - this allows the start and end times to be set when the Night settings will be applied.
• Off - When the night option is off the Day settings will be applied at all times (default).
It is possible for a designated remote operator to temporarily override these settings if the unit is configured to allow this. For more information, refer to Advanced Alarm Settings.
day Timer
This sub-menu allows a schedule to be independently set for each day of the week.
DS2
7 Day TimerThis enables the unit to record using the Day settings at all times.
24Hr Night
This enables the unit to record using the Night settings at all times.
Timed
The schedule will enable the Day settings during a set period and then switch automatically to the Night settings at a programmed time. The diagram shows that the unit will be active with the Day settings from 09:00 on Monday until it switches to the Night settings at 18:00. This is repeated each day until Friday when the settings will be switched to Day then over to Night settings on Saturday and back to Day on Sunday.
Weekend
The weekend option allows times to be configured to determine when the weekend settings would be applied.
The options are:
• On between - this allows the start and end times to be set when the weekend settings will be applied.
• Off - When the weekend option is off the weekend setting will never apply.
Keyswitch
The input which activates the keyswitch can be configured for one of the following options:
• None - There is no keyswitch operation enabled.
• Direct - The direct input on the rear panel has been allocated as the keyswitch trigger.
• Aux - The Aux input on the rear panel has been allocated as the keyswitch trigger, select a contact.
• Module 0� - Module �� - select any input on any module to be the keyswitch trigger.
The keyswitch is used to change the unit from one time mode (Day, Night, Weekend) to another when the input programmed in the settings is activated. If the unit is in Day mode operation, when the input is received the unit will switch to Night mode. If it is in Night mode the unit will still switch but it will remain in Night mode. If the unit is in Weekend mode again the unit will switch but remain Weekend mode.
As the keyswitch is switched off. If the unit has been configured for;
• Day mode - The unit will stay in day mode, and apply day settings.
• Night mode - The unit will switch to day mode and apply the day mode settings.
DS2
• Weekend mode - The unit will switch to day mode and apply the day mode settings.Note: If the Installer has manually configured an individual schedule mode on an alarm zone different to the rest of the zones or on a camera different to the rest of the cameras (ignoring 24Hr zones), the option will switch to a read-only field and display Custom.
Holidays
The holiday profile option allows a user to identify alternative schedule settings that will be actioned on specific dates; this will ensure the system continues to operate during periods when operators are not present or times where the standard schedule settings are not appropriate, e.g. bank holiday weekends.
Current list New date Profile 1 Profile 2 Profile 3
Profile 10
01/02/2006 01/02/2006 Timed Timed Timed
Timed
Profile 1 Profile 2 Day 09:00 Day 09:00 Day 09:00
Day 09:00 Delete Add Night 18:00 Night 18:00 Night 18:00
Night 18:00
24Hr Day, 24 Hr Night 24Hr Day, 24 Hr Night 24Hr Day, 24 Hr Night 24Hr Day, 24 Hr Night
24Hr Day, 24 Hr Night
Holidays
Profile
There are ten editable profiles that can be individually configured for activate period and time settings.
Active Period
The options available are��
Timed (default) The unit will use the Day settings for the period selected and will switch to the Night settings at the specified time.
�4 �r Day The profile will only use the Day settings for the selected date.
�4 �r Night The profile will only use the Night settings for the selected date.