3600d, CM-3610d, CM-3630 or CM-2600d)
Observer 2 degree, 10 degree
8) Select “ Δ b*” from Selected Items 9) Click the Get Selection button.
10) Type “✻✻2)”.
Operation when “L*” is selected:
[L*(D65)$0] is displayed in the text input box. The section between [ and ] indicates the list item. If these symbols ([ ]) are deleted, the Spec- traMagic NX software cannot recognize the list item. A user equation that does not include a list item is not effective.
String “$0” indicates the group attribute of the data. Enter the appropriate value according to the group attribute.
After inputting the user equation in the text input box, click the Done button.
Group attribute String
None $0 SCI $SCI SCE $SCE 25 degree $25D 45 degree $45D 75 degree $75D UV100 $UVF UV0 $UVC UVadj $UVA White $WHT Black $BLK
P re p ari ng for Measu rement
[*12] After a signal color index is added, it can be specified in the follwing procedure.
Select the signal color index moved in the Selected Items pane and click the Edit button.
The Signal Color Index Settings dialog box appears. You can set the polygonal tolerance data here.
■ Signal Color Index Settings
Name
Up to 64 alphanumeric characters can be entered. If no name is specified, the user-defined tolerance data setting cannot be completed.
Chroma
Enter a chromaticity point to add. A numerical value between 0.0001 and 1.0 can be entered or selected.
Add
P repar ing f o r Meas ure m ent Spectral
Specify data to add as a spectral locus. A wavelength between 380 and 780 can be entered or selected.
Add
When this button is clicked, the wavelengths specified at Start and End are added to the data list as dominant wavelengths, and the intersection of the wavelengths and the spectral locus are added to the data list as chromaticity points.
Delete
When the registered data in the data list is selected and this button is clicked, the data is deleted. Edit
When one of the items of registered data in the data list is selected and this button is clicked, the Edit dialog box appears to allow you to edit the data.
Load
If any tolerance data has been saved, the file (extension: .otr) can be loaded and the setting displayed on the screen.
Save
When this button is clicked, the setting is saved in a file (extension: .otr).
The format when displaying the signal color index judgement result in the list is set on the Signal Color Index tab located on the List Format dialog box that is displayed by selecting Data - Judgement Format
P re p ari ng for Measu rement
■ List Format dialog box
Signal Color Index tab Inside
Label: Sets the string displayed in the list window when the result is judged as inside for the signal color index.
Text Color: Sets the text color for the above label displayed in the list window when the result is judged as inside.
Background: Sets the background color for the above label displayed in the list window when the result is judged as inside.
Outside
Label: Sets the string displayed in the list window when the result is judged as outside for the signal color index.
Text Color: Sets the text color for the above label displayed in the list window when the result is judged as outside.
Background: Sets the background color for the above label displayed in the list window when the result is judged as outside.
Judgement
Include Signal Color Index results into the Total Judgement:
When this is checked, the results for Signal Color Index items included in the list win- dow affects the total judgement result.
Signal Color Index 1 to 5:
P repar ing f o r Meas ure m ent
2.3.4 Bank Setting
The data obtained by the simultaneous measurement of SCI+SCE with any of the CM-3600A, CM- 3610A, CM-3600d, CM-3610d, CM-5, CM-2600d/2500d or CM-700d/600d requires two spaces (banks) of the data obtained by the individual SCI or SCE specular component treatment. The data obtained with the CM-3600A, CM-3610A, CM-3600d, CM-3630 or CM-2600d by
simultaneous measurement using the UV100% + UV0% + UV adjustment requires spaces (banks) for three pieces of data. Such data is called “data of three banks”. (Measurement using UV adjustment is supported by the Professional Edition only.)
When the CM-512m3A or CM-512m3 is used for measurement, the data of multi-angles (25 degree, 45 degree, and 75 degree) is also obtained. Consequently, such data requires three spaces (banks) and is called “data of three banks”.
A single data file can store only the data of the same number of banks.
A single data file also can store only the data of the same type. For example, a data file of two banks can store the data of SCI + SCE, or UV100% + UV 0% or Opacity. A data file of three banks can store the data of multi-angles (25 degrees, 45 degrees, 75 degrees) or UV100% + UV0% + UV adjustment. During measurement, the number of banks for the file is determined based on the number of banks of the sample data. If you enter target data manually before measurement, you need to specify the number of banks in the Bank dialog box.
■ Bank dialog box
Number of bank:
Select the number of banks from 1, 2 or 3.
P re p ari ng for Measu rement