SESSION CHAIR: Marco Jose Da Silva, Federal University of Technology Parana C2P-12-1
Compact CNN for Rapid Inter-Day Hand Gesture Recognition and Person Identification from sEMG
Benjakarn Leelakittisin, Theerawit Wilaiprasitporn, Thapanun Sudhawiyangkul Vidyasirimedhi Institute of Science and Technology, Thailand
C2P-12-2
WEDNESDAY, NOVEMBER 3
Estimation of Leak Time Parameter Based on Fusion of Leak Behavior and Data Distribution Characteristic from Gas Flow Sensor Data
Jing Liang{1}, Shan Liang{1}, Hao Zhang{1}, Li Ma{2}
{1}Chongqing University, China; {2}Southwest Oil and Gasfield Company, China
C2P-12-3
Estimation Method of Interfacial Stress Distribution by Inverse Analysis of Deformed Shape Data Yoshinao Kishimoto{1}, Yukiyoshi Kobayashi{1}, Feng Jin{2}
{1}Tokyo City University, Japan; {2}Xi’an Jiaotong University, China C2P-12-4
Air-Coupled Ultrasound Resonant Spectroscopy Sensitivity Study in Plant Leaf Measurements Linas Svilainis{2}, Žilvinas Nakutis{2}, Valdas Eidukynas{2}, Dobilas Liaukonis{2}, Arturas
Aleksandrovas{2}, Andrius Chaziachmetovas{2}, Tomas Gomez Alvarez-Arenas{1}
{1}Institute for Physical and Information Technologies, Spain; {2}Kaunas University of Technology, Lithuania
C2P-12-5
ENFES: ENsemble FEw-Shot Learning for Intelligent Fault Diagnosis with Limited Data Onat Gungor{2}, Tajana Rosing{2}, Baris Aksanli{1}
{1}San Diego State University, United States; {2}University of California San Diego, United States C2P-12-6
Autoencoder-Based Ultrasonic NDT of Adhesive Bonds
Ivan Kraljevski{2}, Frank Duckhorn{2}, Martin Barth{2}, Constanze Tschoepe{2}, Frank Schubert{2}, Matthias Wolff{1}
{1}Brandenburgische Technische Universität Cottbus-Senftenberg, Germany; {2}Fraunhofer Institute for Ceramic Technologies and Systems, Germany
C2P-12-7
Assessment of a Neural Network for the Correction of Measurement Errors Phil Meier, Kris Rohrmann, Marvin Sandner, Marcus Prochaska
Ostfalia University of Applied Sciences, Germany C2P-12-8
Deep Learning Based Volume Fraction Estimation for Two-Phase Water-Containing Flows Rafiul Rasel{1}, Benjamin Straiton{2}, Alex Solon{2}, Qussai Marashdeh{2}, Fernando Teixeira{1}
{1}Ohio State University, United States; {2}Tech4Imaging, United States C2P-12-9
One-Shot Radar-Based Gesture Recognizer for Fast Prototyping
Xiaodong Cai{1}, Haoyang Wu{2}, Jingyi Ma{2}, Hemin Han{1}, Lili Michael Ma{1}
{1}Intel Corporation, China; {2}Intel Labs China, China 14:00 – 15:00 UTC
WEDNESDAY, NOVEMBER 3
62
C2P-13-1
Energy Monitoring Using LoRaWAN-Based Smart Meters and oneM2M Platform Shubham Mante, Ruthwik Muppala, Niteesh D., Aftab Hussain
International Institute of Information Technology, Hyderabad, India
C2P-13-2
Low-Cost NB-IoT Microgrid Power Quality Monitoring System
Dmitry Petrov, Konstantin Kroschewski, Ibrahim Mwammenywa, Geoffrey Mark Kagarura, Ulrich Hilleringmann
Paderborn University, Germany C2P-13-3
Using Redundancy in a Sensor Network to Compensate Sensor Failures Nicolas Winkler{1}, Patrick Neumann{1}, Erik Schaffernicht{2}, Achim Lilienthal{2}
{1}BAM Bundesanstalt für Materialforschung und -prüfung, Germany; {2}Örebro University, Sweden C2P-13-4
A Doppler-Based Human Activity Recognition System Using WiFi Signals
Yao Ge{2}, Shibo Li{1}, Minjian Shentu{1}, Ahmad Taha{2}, Shuyuan Zhu{1}, Jonathan Cooper{2}, Muhammad Ali Imran{2}, Qammer H. Abbasi{2}
{1}University of Electronic Science and Technology of China, China; {2}University of Glasgow, United Kingdom
C2P-13-5
Oversampling Highly Imbalanced Indoor Positioning Data Using Deep Generative Models Fahad Alhomayani, Mohammad Mahoor
University of Denver, United States 14:00 – 15:00 UTC
C2P-14: SENSOR MATERIALS, PROCESSING & FABRICATION II
SESSION CHAIRS: Masato Sone, Tokyo Institute of Technology & Mohsen Asadnia, Macquarie University
C2P-14-1
Smartphone Sensor for Pesticide Monitoring Using CuO Modified Screen Printed Electrodes Narat Maraprasertsak{1}, Patamaporn Subpanyadee{1}, Punvinai Vinaisuratern{1}, Chanchana Thanachayanont{2}, Porpin Pungetmongkol{1}
{1}Chulalongkorn University, Thailand; {2}Thailand National Metal and Materials Technology Center, Thailand
C2P-14-2
DC Electric Metamaterial Behaviour in Tuned Fused Deposition Modelling Prints Alexander Dijkshoorn, Thijs Hamstra, Remco Sanders, Stefano Stramigioli, Gijs Krijnen University of Twente, Netherlands
C2P-14-3
New Heterostructured Ni3S2-rGO Based Room Temperature NH3 Sensor
Boitumelo Tlhaole{2}, Neil Coville{2}, Ella Linganiso{2}, Nathalie Redon{1}, Jean-Luc Wojkiewicz{1}, Thomas Fagniez{1}, Caroline Duc{1}
WEDNESDAY, NOVEMBER 3
{1}Université de Lille, France; {2}University of the Witwatersrand, South Africa
C2P-14-4
Investigation of the Effect of Printing Angle and Device Orientation on
Micro-Stereolithographically Printed, and Self-Insulated, 24-Well, High-Throughput 3D Microelectrode Arrays
Jorge Manrique Castro, Avra Kundu, Adam Rozman, Swaminathan Rajaraman University of Central Florida, United States
C2P-14-5
Towards All-Polymeric Cochlear Implant Micro-Electrode Arrays Alberto Miralles-Abete, Paddy French
Delft University of Technology, Netherlands C2P-14-6
A Screen-Printed Stretchable Bioelectrical Sensing Sleeve with QuasiDry Microfluid-Wicking Interface
Mingde Zheng, Salvatore Zarra, Bibek Samanta Nokia Bell Labs, United States
C2P-14-8
High Strength Piezoelectric Materials for Extreme Environments Tim Comyn, Peter Cowin, Tim Stevenson
Ionix Advanced Technologies, United Kingdom C2P-14-9
Anisotropic Magneto-Resistive Sensor Effect Based Sensor Using Daisy Chain on Polyether Ether Ketone Substrate
Sascha de Wall, Sebastian Bengsch, Eike Fischer, Folke Dencker, Marc Christopher Wurz Institute of Micro Production Technology, Leibniz University Hannover, Germany
C2P-14-10
Membrane-Based Artificial Hair Sensors for Flow Sensing and Haptic Exploration Minerva Vargas Gleason, Walter Lang
Institute for Microsensors, Actuators and Systems, Universität Bremen, Germany C2P-14-11
Implantable Sufficiently Integrated Multimodal Flexible Sensor for Intracranial Monitoring Tiezhu Liu{1}, Pan Yao{1}, Zhou Li{2}, Hongqing Feng{2}, Chengyu Zhuang{4}, Xuan Sun{3}, Chunxiu Liu{1}, Ning Xue{1}
{1}Aerospace Information Research Institute, Chinese Academy of Sciences, University of Chinese Academy, China; {2}Beijing Institute of Nanoenergy and Nanosystems, University of Chinese Academy
WEDNESDAY, NOVEMBER 3
64
C2P-14-12
Stretchable Pressure Sensor Using Thermoplastic Polyurethane and Conductive Inks Jawad Ahmad{2}, Johan Sidén{1}, Henrik Andersson{2}
{1}Mid Sweden Unievrsity, Sweden; {2}Mid Sweden University, Sweden C2P-14-13
Biodegradable Additive Manufactured Ferroelectret as Mechanical Sensor
Omar Ben Dali, Sergey Zhukov, Claas Hartman, Heinz von Seggern, Gerhard Martin Sessler, Mario Kupnik
Technische Universität Darmstadt, Germany C2P-14-14
Dual-Printed Soil Sensors for Nitrate and Moisture Monitoring
Shenwei Yin, Muhammadeziz Tursunniyaz, Jingyi Huang, Joseph Andrews University of Wisconsin-Madison, United States
C2P-14-15
Carbon Nanotubes/Polymer Films for Microsensors Applications
Marco Antonio Cen-Puc, Tim Mike de Rijk, Minerva Vargas Gleason, Walter Lang Institute for Microsensors, Actuators and Systems, Universität Bremen, Germany C2P-14-16
Fully Printed pH Sensor Based in Carbon Black/Polyaniline Nanocomposite
Shirin Mahinnezhad, Homa Emami, Mohsen Ketabi, Ahmad Al Shboul, Najet Belkhamssa, Andy Shih, Ricardo Izquierdo
École de Technologie Supérieure, Canada C2P-14-17
Aerosol-Jet Printing of Flexible Green Graphene Humidity Sensors for IoT Applications Mohsen Ketabi, Ahmad Al Shboul, Shirin Mahinnezhad, Ricardo Izquierdo
École de Technologie Supérieure, Canada C2P-14-18
Inkjet Printed 3D Gold Electrochemical Sensor on Shape Memory Polymer for Lead Detection Annatoma Arif, Angela Mendez Contreras, Sheikh Dobir Hossain, Robert C. Roberts
University of Texas at El Paso, United States C2P-14-19
Printed Capacitive Pressure Sensor with Enhanced Sensitivity Through a Layered PDMS/BaTiO3 Structure
Wenxin Wu, Kevin Schnittker, Joseph Andrews University of Wisconsin-Madison, United States
THURSDAY, NOVEMBER 4
11:00 – 12:30 UTC