In the [Advanced] tab of the [Setting] dialog box, you can set the functions below.
The color profile data of this equipment may be updated. If the SNMP communication between this equipment and your computer is available, open the [Advanced] tab menu and then click [Update Now] to obtain the updated color profile data.
y This option is available only when you have a multifunctional digital color system. The setup items differ depending on the model. For setup items other than below, refer to the corresponding Printing Guide.
y The [Advanced] tab menu is displayed when [Advanced] is selected in [Image Quality]. The [Advanced] option is available only for the Universal Printer (PS3)/PS3/XPS Printer driver.
Color profiles can also be set from the TopAccess menu. For the detailed instructions on how to set color profiles from the TopAccess menu, refer to the TopAccess Guide.
1) RGB Source Profile
This selects the RGB source profile. When you obtained color profile data from this equipment, the RGB source profile data of this equipment appear.
2) CMYK Source Profile
This selects the CMYK source profile. When you obtained color profile data from this equipment, the CMYK source profile data of this equipment appear.
3) Apply to Device Color Only
Select this check box when you give priority to color profiles embedded in the image.
4) Destination Profile
This selects the destination profile. When you obtained color profile data from this equipment, the destination profile data of this equipment appear.
5) Rendering Intent
This selects the method for color space conversion when you print images.
- Printer’s Default — Color space conversion is performed according to the default profile.
- Perceptual — This is recommended for photo images.
- Relative Colorimetric — More original colors can be retained than those when you select [Perceptual].
- Saturation — This is recommended when the vividness of colors is more important than their correct reproduction.
It is useful for graphic charts.
- Absolute Colorimetric — Original colors can be retained even on colored paper.
6) [Restore Defaults]
Click this to restore all the image quality setting details displayed in the [Advanced] tab menu to the original factory defaults.
[Printer’s Default] is a default setting for RGB Source Profile, CMYK Source Profile, Destination Profile and Rendering Intent. When you select [Printer’s Default], color space conversion is performed according to the default profile (that set as a default profile in the [ICC Profile] submenu of the [Setup] menu in the TopAccess administrator mode).
[Effect] tab
The [Effect] tab contains print options that add effects to your print jobs such as Watermarks, Overlay Image printing, Rotate printing, Mirror printing, and Negative/Positive printing.
[Effect] tab for Universal Printer (PCL6)
[Effect] tab for Universal Printer (PS3)/XPS
1
2
3
1
2
3 5 4
[Effect] tab for PS3
1) Watermark
This selects the watermark to be used or edited. The following values except [None] are the default watermarks that have been registered in the printer driver. Up to 15 new watermarks can be added in this box.
- None — Select this if no watermark is desired.
The following default watermarks are also displayed in the box:
- TOP SECRET - CONFIDENTIAL - DRAFT
- ORIGINAL - COPY
For the detailed instructions on how to print with the [Watermark] setting, see the following page:
P.101 “Printing with watermarks”
[Add]
Click this to create a new watermark. The [Watermark] dialog box appears when you click on this.
P.58 “Add/Edit Watermark”
[Edit]
Select a watermark from the [Watermark] box and click it to edit the watermark. The [Watermark] dialog box appears when you click on this.
P.58 “Add/Edit Watermark”
[Delete]
Select a watermark from the [Watermark] box and click it to delete a watermark.
P.103 “Deleting a watermark”
y The default watermarks can be deleted but, once deleted, they cannot be restored.
y [None] cannot be deleted.
Print on First Page Only
Select this check box to print a watermark on the first page only. This setting will become available when any watermark is selected from the [Watermark] box.
2) Overlay Image
1
2
3 5
y When [Overlay Image] is selected together with the N-up printing, 1 overlay image will be printed on the entire page, regardless of the number of images set in 1 page.
y Both the overlay file and the documents on which you superimpose the overlay image must be created in the same size, color mode and orientation.
y If you want to use an overlay image in your job, you must first create an overlay file. To do this, create an overlay image with most applications and print it as an overlay file. You can enable creating an overlay file on the [Print Job] box.
P.81 “Printing a document as an overlay file”
y For the detailed instructions on how to print with the [Overlay Image] setting, see the following page:
P.104 “Printing with an overlay file”
[Details]
Click this to set which overlay image is applied to which page, such as changing the type of overlay image for odd pages and that for even pages or applying an overlay image only to the specified pages.
If you click this when [Multiple Overlays] is selected in the [Overlay Image] box, the [Multiple Overlays] dialog box appears.
P.59 “Multiple Overlays”
[Delete]
Click this to delete the overlay image that you select in the box.
P.105 “Deleting an overlay image”
Print Over the Document
Select this check box to print an overlay image over the document.
Print on Each Page
This selects whether overlay images are printed for each page or paper when multiple pages are printed on one sheet with options such as Number of pages per sheet or Booklet. Select this check box when overlay images are printed for each page.
3) Rotate 180 Degrees
Select this check box to perform rotation printing of an image.
4) Mirror
Select this check box to perform mirror printing of an image.
This print option is not displayed for the Universal Printer (PCL6)/PS3 printer driver.
5) Negative/Positive
Select this check box to perform negative printing of an image.
y This print option is not displayed for the Universal Printer (PCL6) driver.
y The Negative/Positive option is available only when [Black and White] is selected at the [Color] box on the [Basic] tab.