Setup Menu Options
F
F DATE/TIME DATE/TIME
Set the camera clock (P 21).
N
N TIME DIFFERENCE TIME DIFFERENCE
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the diff erence between local time and your home time zone:
1 Highlight g LOCAL and press MENU/OK.
2 Use the selector to choose the time diff erence between local time and your home time zone. Press MENU/OK when settings are complete.
To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time zone, select h HOME. If g LOCAL is selected, g will be displayed for three seconds when the camera is turned on.
Q
Q aa
Choose a language (P 21).
R R RESET RESET
Reset shooting or setup menu options to default values. Custom white balance, custom settings banks created using KK EDIT/
SAVE CUSTOM SETTING, rr WIRELESS SETTINGS, and the setup menu F DATE/TIME, N TIME DIFFERENCE options are not aff ected.
1 Highlight the desired option and press the selector right.
2 A confi rmation dialog will be displayed; highlight OK and press MENU/OK.
o
o SOUND & FLASH SOUND & FLASH
Select OFF to disable the speaker, fl ash, and illuminator in situations in which camera sounds or lights may be unwelcome.
o appears in the display when OFF is selected.
The Setup Menu b
b SOUND SET-UP SOUND SET-UP Adjust sound settings.
Option
Option DescriptionDescription
OPERATION VOL.
OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF (mute) to disable control sounds.
SHUTTER VOLUME
SHUTTER VOLUME Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute) to disable the shutter sound.
SHUTTER SOUND
SHUTTER SOUND Choose the sound made by the shutter.
PLAYBACK VOLUME
PLAYBACK VOLUME Adjust the volume for movie playback.
A
A SCREEN SET-UP SCREEN SET-UP Adjust display settings.
Option
Option DescriptionDescription
IMAGE DISP.
IMAGE DISP.
Choose how long images are displayed after shooting. Colors may diff er slightly from those in the fi nal image and “noise” mottling may be visible at high sensitivities.
Option
Option DescriptionDescription
CONTINUOUS CONTINUOUS
Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the command dial; press again to cancel zoom.
1.5 SEC
1.5 SEC Pictures are displayed for 1.5 seconds (1.5 SEC) or 0.5 seconds (0.5 SEC) or until the shutter button is pressed halfway.
0.5 SEC 0.5 SEC OFF
OFF Pictures are not displayed after shooting.
Menus The Setup Menu A
A SCREEN SET-UP (Continued) SCREEN SET-UP (Continued) Option
Option DescriptionDescription
EVF BRIGHTNESS
EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfi nder.
LCD BRIGHTNESS
LCD BRIGHTNESS Adjust monitor brightness.
PREVIEW PIC. EFFECT PREVIEW PIC. EFFECT
Choose ON to preview the eff ects of fi lm simulation, white balance, and other settings in the monitor.
Choose OFF to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible.
R If OFF is selected, the eff ects of camera settings will not be visible in the monitor and colors and tone will diff er from those in the fi nal picture. The display will however be adjusted to show the eff ects of advanced fi lters and of monochrome and sepia settings.
FRAMING GUIDELINE FRAMING GUIDELINE
Choose the type of framing grid available in shooting mode.
F
F GRID 9 GRID 9 GG GRID 24 GRID 24 HH HD FRAMING HD FRAMING
P P P
For “rule of thirds” composition. A six-by-four grid. Frame HD pictures in the crop shown by the lines at the top and
bottom of the display.
AUTOROTATE PB
AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
FOCUS CHECK
FOCUS CHECK If ON is selected, the camera will automatically zoom in on the view through the lens when the focus ring is rotated in manual focus mode (P 66).
FOCUS SCALE UNITS
FOCUS SCALE UNITS Choose the units used for the focus distance indicator (P 66).
DISP. CUSTOM SETTING
DISP. CUSTOM SETTING Choose items for the standard display (P 26).
The Setup Menu h
h BUTTON/DIAL SETTING BUTTON/DIAL SETTING
Choose the roles played by camera controls.
Option
Option DescriptionDescription
FUNCTION (Fn) SETTING
FUNCTION (Fn) SETTING Choose the roles played by the function buttons (P 44).
SELECTOR BUTTON SETTING SELECTOR BUTTON SETTING
Choose the roles played by the up, down, left, and right buttons on the selector.
Option
Option DescriptionDescription
Fn BUTTON
Fn BUTTON The selector buttons serve as function buttons.
FOCUS AREA
FOCUS AREA The selector buttons can be used to position the focus area.
EDIT/SAVE QUICK MENU
EDIT/SAVE QUICK MENU Choose the options displayed in the quick menu (P 42).
COMMAND DIAL SETTING
COMMAND DIAL SETTING Choose whether the command dial controls shutter speed (S.S, the default option) or aperture (F).
R This option only takes eff ect with lenses that are not equipped with an aperture ring.
AE-L/AF-L BUTTON SETTING
AE-L/AF-L BUTTON SETTING Switch the roles of the AF-L and AE-L buttons.
I
I FOCUS RING FOCUS RING
Choose the direction in which the focus ring is rotated to increase the focus distance.
Z
Z POWER MANAGEMENT POWER MANAGEMENT Adjust power management settings.
Option
Option DescriptionDescription
AUTO POWER OFF AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are performed.
Shorter times increase battery life; if OFF is selected, the camera must be turned off manually. Note that in some situations the camera turns off automatically even when OFF is selected.
HIGH PERFORMANCE
HIGH PERFORMANCE Select ON for faster focus and to reduce the time needed to restart the camera after it has been turned off .
Menus The Setup Menu V
V SENSOR CLEANING SENSOR CLEANING
Remove dust from the camera image sensor.
• OK: Clean sensor immediately (P xi).
• WHEN SWITCHED ON: If this option is selected, sensor cleaning will be performed when the camera turns on.
• WHEN SWITCHED OFF: If this option is selected, sensor cleaning will be performed when the camera turns off (sensor cleaning is not however performed if the camera turns off in playback mode).
R Dust that can not be removed using sensor cleaning can be removed manually (P 131).
t
t SAVE DATA SET-UP SAVE DATA SET-UP Adjust fi le management settings.
Option
Option DescriptionDescription
FRAME NO.
FRAME NO.
New pictures are stored in image fi les named using a four-digit fi le number assigned by adding one to the last fi le number used. The fi le number is displayed during playback as shown at right. FRAME NO. controls whether fi le numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted.
Frame number
CONTINUOUS Numbering continues from the last fi le number used or the fi rst available fi le number, whichever is higher. Choose this option to reduce the number of pictures with duplicate fi le names.
RENEW
RENEW Numbering is reset to 0001 after formatting or when a new memory card is inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P 138).
R Selecting R RESET (P 103) sets FRAME NO. to CONTINUOUS but does not reset the fi le number.
R Frame numbers for pictures taken with other cameras may diff er.
SAVE ORG IMAGE
SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using BB RED EYE REMOVAL.
EDIT FILE NAME
EDIT FILE NAME Change the fi le name prefi x. sRGB images use a four-letter prefi x (default “DSCF”), Adobe RGB images a three-letter prefi x (“DSF”) preceded by an underscore.
The Setup Menu J
J COLOR SPACE COLOR SPACE
Choose the gamut of colors available for color reproduction.
Option
Option DescriptionDescription
sRGB
sRGB Recommended in most situations.
Adobe RGB
Adobe RGB For commercial printing.
u
u EVF/LCD SETTING EVF/LCD SETTING Choose a display (P 23).
Menus The Setup Menu r
r CONNECTION SETTING CONNECTION SETTING
Adjust settings for connection to wireless devices, including smartphones, computers, and FUJIFILM instax SHARE printers.
Option
Adjust settings for connection to wireless networks.
Option
Option DescriptionDescription
GENERAL SETTINGS GENERAL SETTINGS
Choose a name (NAME) to identify the camera on the wireless network (the camera is as-signed a unique name by default) or select RESET WIRELESS SETTINGS to restore default settings.
RESIZE IMAGE FOR RESIZE IMAGE FOR SMARTPHONE SMARTPHONE H
Choose ON (the default setting, recommended in most circumstances) to resize larger images to H for upload to smartphones, OFF to upload images at their original size.
Resizing applies only to the copy uploaded to the smartphone; the original is not aff ected.
PC AUTO SAVE PC AUTO SAVE SETTINGS SETTINGS
Choose DELETE REGISTERED DESTINATION PC to remove selected destinations, DE-TAILS OF PREVIOUS CONNECTION to view computers to which the camera has recently connected.
PC AUTO SAVE PC AUTO SAVE SETTING SETTING
Choose an upload destination. Choose SIMPLE SETUP to connect using WPS, MANUAL SETUP to confi g-ure network settings manually.
GEOTAGGING SET-UP GEOTAGGING SET-UP
View location data downloaded from a smartphone and choose whether to save the data with your pic-tures.
Option
Option DescriptionDescription
GEOTAGGING
GEOTAGGING Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.
LOCATION INFO
LOCATION INFO Display the location data last downloaded from a smartphone.
instax PRINTER instax PRINTER CONNECTION SETTING
CONNECTION SETTING Adjust settings for connection to optional FUJIFILM instax SHARE printers (P 123).
R For more information on wireless connections, visit http://fujifilm-dsc.com/wifi/
The Setup Menu K
K FORMAT FORMAT
To format the memory card:
1 Highlight K FORMAT in the setup menu and press MENU/OK.
2 A confi rmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK.
To exit without formatting the memory card, select CANCEL or press DISP/BACK.
Q All data—including protected pictures—will be deleted from the memory card. Be sure important fi les have been copied to a computer or other storage device.
Q Do not open the battery-chamber cover during formatting. SET
FORMAT FORMAT OK?
ERASE ALL DATA OK CANCEL
Menus