Single-beam M18 cylindrical sensor for detecting people, objects, and vehicles

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Technical data

Retroreflective sensor GLV18-.../115

Model Number

GLV18-6/115/120 GLV18-6/25/103/115 GLV18-6-S/115/120 GLV18-55/115/120 GLV18-55/25/103/115 GLV18-55-S/115/120 GLV18-55-S/25/102/115

Effective detection range 0 ... 3.5 m  

0 ... 4 m  

Function display LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is

interrup-ted       

Operating voltage 10 ... 30 V DC       

No-load supply current < 20 mA       

Switching type light/dark on    

light on   

Signal output 1 NPN, short-circuit protected open collector 

1 PNP, short-circuit protected, open collector  

2 PNP, complementary, short-circuit protected, open collectors    

Switching voltage max. 30 V DC       

Switching current max. 100 mA       

Voltage drop  1.5 V DC       

Switching frequency 500 Hz       

Response time  1 ms       

Product standard EN 60947-5-2:2007

IEC 60947-5-2:2007       

Protection class II, rated insulation voltage  250 V AC with pollution degree 1-2

according to IEC 60664-1       

UL approval cULus Listed, Class 2 Power Source       

CCC approval Products with a maximum operating voltage of 36 V do not bear a

CCC marking because they do not require approval.       

Photoelectric Sensors , R etr or e flectiv e sensors

Retroreflective sensor GLV18-.../115

27.2 2.2

Option 25/103/115 Option 25/103/115

+UB

1 Operating display green

2 Signal display yellow

4 Emitter

Notes

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Accessories

CPZ18B03 Mounting Bracket with swivel nut

BF 18 Mounting flange, 18 mm

BF 18-F Mounting flange with dead stop, 18 mm

BF 5-30 Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mm

Retroreflective sensor GLV18-.../115

GLV18-6...

x Stability control > 2 Stability control < 2

Stability control

Distance X [m]

Relative received light strength

8 m Stability control > 2 Stability control < 2

Stability control

Distance X [m]

Relative received light strength

6.5 m

Stability control > 2 Stability control < 2

Stability control

Distance X [m]

Relative received light strength

Reflector type: Stability control > 2 Stability control < 2

Stability control

Distance X [m]

Relative received light strength

100

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Product information

Typical applications Detection area

Retroreflective sensor GLK18-.../25/115/161

• Efficient Line in a short M18 plastic housing for standard applications

• 4 LEDs indicator for 360° visibility

• Version for universal voltages

• Sidelookerversion

• Version with front optical face

Packaging industry:

• Presence checks, track loading, completeness checks, stack height control

Material handling

• Presence checks, target sensor, profile checks, trigger sensor

Automatic doors, gates and access systems, elevator:

• Secure detection for automatic door and gate systems

• Monitoring function in turnstiles

The GLV/GLK18 series sensors help improve the efficiency of machines and systems. The design of the M18 plastic housing, the connection technology, and sensor properties are highly standardized. Concen-trating on the key sensor requirements has produced a robust and reliable product series for DC and AC/

DC voltage systems without any over-engineering. The mounting set included in the scope of delivery and the optimized potentiometer design ensure fast assembly and easy configuration.

Single-beam M18 threaded photoelectric sensor for detecting people, objects and

vehicles

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Technical data

Retroreflective sensor GLK18-.../25/115/161

Model Number

GLK18-6/25/115/161 GLK18-6-S/25/115/161 GLK18-55/25/115/161 GLK18-55-S/25/115/161

Effective detection range 0 ... 3.5 m 

0 ... 4 m 

0 ... 5.5 m 

0 ... 6.5 m 

Threshold detection range 8 m 6.5 m 5.5 m 4.5 m

Reference target reflector C110-2    

Light source LED    

Light type modulated visible red light , 640 nm    

Diameter of the light spot approx. 160 mm at 4.5 m 

approx. 200 mm at 5.5 m 

approx. 250 mm at 6.5 m 

approx. 300 mm at 8 m 

Angle of divergence approx. 2 °    

Optical face frontal  

lateral  

Ambient light limit 30000 Lux    

Accessories provided Mounting aids    

Operating display LED green, statically lit Power on    

Function display LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is

interrup-ted    

Operating voltage 20 ... 250 V AC/DC    

No-load supply current < 2.5 mA    

Switching type light on    

Signal output N-channel MOSFET, short circuit protected    

Switching voltage max. 250 V AC/DC    

Switching current max. 200 mA    

Voltage drop  3.5 V AC/DC    

Switching frequency 50 Hz    

Response time  10 ms    

Product standard EN 60947-5-2:2007 ; IEC 60947-5-2:2007    

Standards UL 508    

Protection class II, rated insulation voltage  250 V AC with pollution degree 1-2

according to IEC 60664-1    

UL approval cULus Listed, Type 1 enclosure    

Ambient temperature -20 ... 60 °C (-4 ... 140 °F)    

Storage temperature -40 ... 70 °C (-40 ... 158 °F)    

Protection degree IP67    

Connection 2 m, 3 x 0.34 mm², PVC cable    

Housing PC-PBT    

Optical face PMMA    

Mass approx. 100 g    

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Electrical connection Dimensions

Indicators/operating means

Retroreflective sensor GLK18-.../25/115/161

ø 16.8 13.1

ø 11.2 M18 x 1

15

3.5 3.5

2.215.6 45.2 71.2 5.2 10.4 2.2 43 55.6

ø 11.2 M18 x 1

15

3.5 7.0

7.8

GLD18-*-S GLD18-*

+UB BN

BK Q

BU 0 V

Option 25/115/161

1 Operating display green

2 Signal display yellow

4 Emitter 5 Receiver 4

1 2

2 1 5

❍ = Light on, ● = Dark on

Notes

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Accessories

Retroreflective sensor GLK18-.../25/115/161

Offset Y [mm]

Distance X [m]

Characteristic response curve

x

Offset Y [mm]

Distance X [m]

Characteristic response curve

70

Offset Y [mm]

Distance X [m]

Characteristic response curve

x Offset Y [mm]

Distance X [m]

Characteristic response curve

90

CPZ18B03 Mounting Bracket with swivel nut

BF 18 Mounting flange, 18 mm

BF 18-F Mounting flange with dead stop, 18 mm

BF 5-30 Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mm

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Product information

Typical applications Detection area

Retroreflective sensor ML8-55/...

• Cost-optimized series for standard tasks

• Miniature design

• Tamper-proof, no operating controls

• Flexible use with versatile mounting opportunities

• Yellow LED indicator behind the front panel

• 2-way LED indicator for switch status

• Push-pull output

Doors, gates and elevators

• Monitoring of closing edges on automatic doors and elevators

• Monitoring function for turnstiles

• Activation function for restarting escalators Container handling

• Target sensor

• Control movement on conveyors

• Stack height monitoring

General assembly applications

• Presence monitoring

Small, robust and reliable, the ML8 series of miniature sensors is particularly suitable for non-contact detection of objects in confined spaces. The LED indicator is located behind the lens and provides reli-able information on the sensor's operating status. The LED is always visible, even if the sensor is comple-tely embedded. Flexible mounting options and fixed preset detection ranges simplify setup and operation.

Basic miniature photoelectric sensor for detecting people, objects and vehicles

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Technical data

Retroreflective sensor ML8-55/...

Model Number

ML8-55/103/115 ML8-55/103/115b ML8-55/115b/136/138 ML8-55/103/143

Effective detection range 0 ... 3 m    

Threshold detection range 3.5 m    

Reference target H85-2 reflector    

Light source LED    

Light type modulated visible red light    

Diameter of the light spot approx. 180 mm at a distance of 3.5 m    

Angle of divergence approx. 3 °    

Ambient light limit 40000 Lux    

Function display LED yellow: switching state    

Operating voltage 10 ... 30 V DC , class 2    

Ripple max. 10 %    

No-load supply current < 12 mA   

< 15 mA 

Switching type dark on    

Signal output 1 PNP output, short-circuit protected, reverse polarity protected,

open collector   

2 push-pull (4 in 1) outputs, complementary, short-circuit proof,

reverse polarity protected 

Switching voltage max. 30 V DC    

Switching current max. 100 mA    

Voltage drop  1.5 V DC   

 2.5 V DC 

Response time 1.8 ms    

Directive conformity EMC Directive 2004/108/EC    

Product standard EN 60947-5-2:2007    

Protection degree EN 60529    

Standards EN 50178, UL 508    

Protection class II, rated voltage  250 V AC with pollution degree 1-2 according to

IEC 60664-1    

UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure    

CCC approval Products with a maximum operating voltage of 36 V do not bear a

CCC marking because they do not require approval.    

Ambient temperature -20 ... 60 °C (-4 ... 140 °F)    

Storage temperature -40 ... 75 °C (-40 ... 167 °F)    

Protection degree IP67    

Connection 2 m fixed cable 

fixed cable 300 mm with M12 x 1 connector , 4-pin  

M8 x 1 connector, 4-pin 

Housing PC (glass-fiber-reinforced Makrolon)    

Optical face PMMA    

Connector plastic 

Mass approx. 10 g 

approx. 30 g 

approx. 50 g  

Tightening torque, fastening screws  0.4 Nm 

Photoelectric Sensors , R etr or e flectiv e sensors

Retroreflective sensor ML8-55/...

Transmitter

Option /115 Option /143

1 3

Wire colors in accordance with EN 60947-5-2 (brown)

1 Switching state yellow 2 Emitter

3 Receiver

2 3 1

❍ = Light on, ● = Dark on

Notes

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Accessories

Retroreflective sensor ML8-55/...

x Offset Y [mm]

Distance X [m]

Characteristic response curve

0 0.5 1.0 1.5 2.0 2.5 3.0 3.5

Stability control > 1.5 Stability control < 1.5

Stability control

Distance X [m]

Relative received light strength

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5

Montagekit OMH-ML7-01 Mounting set consisting of bracket OMH-ML-01 sheet ONH-ML7-03, and fastening material

Montagekit OMH-ML7-02 Mounting set consisting of bracket OMH-ML-02 sheet ONH-ML7-03, and fastening material

OMH-ML7-01 Mounting bracket

OMH-ML7-02 Mounting bracket

OMH-ML7-03 Fixing plate

V31-WM-2M-PUR 4-pin, M8 socket, PUR cable

V31-GM-2M-PUR 4-pin, M8 socket, PUR cable

Photoelectric Sensors , R etr or e flectiv e sensors

1

.7

Product information

Typical applications Detection area

Retroreflective sensor RL.91-6-IR/.../115

• Retroreflective sensor for single-beam closing edge protection

• Narrow housing suitable for small gaps

• Sturdy plastic housing

• Various possibilities for mounting

• Version with infrared light

• Version for supply voltage of up to 30 V DC

• Version with AC/DC power supply

• Dark on version

• Light on version

S

• Closing-edge monitoring for elevators, barriers and industrial doors

• Detecting and tracking objects in material handling

Concentration on the essentials is the hallmark of the 91 series. As ac/dc supply devices, these economi-cal, reliable and easy-to-use photoelectric sensors can be used almost universally. Their narrow design means that they can be used in any environment.

The single-beam photoelectric sensors of the 91 series are suitable for closing-edge monitoring for

In document Sensors for the. of people and vehicles (Page 151-163)