_____________________________________________
MS IEC 60335-2-102 : 2005
Household and similar electrical appliances – Safety – Part 2- 102 : Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections.
This Malaysian Standard deals with the safety of gas, oil and solid- fuel burning appliances having electrical connections, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.
Price RM20
97.140
Furniture
MS 1215 : Part 1 : 1991
Methods of test for finishes for wooden furniture : Part 1 : Assessment of glare by measurement of specular gloss at 60°C and 85°C.
This Part of Malaysian Standard describes two methods of test for assessing the glare of a finished surface by measurement of the specular gloss at 60°C and 85°C.
Price RM10
MS 1215 : Part 2 : 1991
Methods of test for finishes for wooden furniture : Part 2 : Assessment of surface resistance to wet heat.
This Part of Malaysian Standard describes a method for assessing the resistance of a wood finishing system to marking by a hot body placed on a damp cloth on the finished surface. This method is not intended for use on completed articles of furniture.
Price RM20
MS 1215 : Part 3 : 1991
Methods of test for finishes for wooden furniture : Part 3 : Assessment of surface resistance to dry heat.
This Part of Malaysian Standard describes a method for assessing the resistance of a wood finishing system to marking by a hot body placed on a damp cloth on the finished surface. This method is not intended for use on completed articles of furniture.
Price RM20
MS 1215 : Part 4 : 1991
Methods of test for finishes for wooden furniture : Part 4 : Assessment of surface resistance to cold liquids.
This Part of Malaysian Standard describes a method for assessing the resistance of a wood finishing system to marking by a disc of material saturated with the test liquid and placed in contact with the finished surface.
Price RM20
MS 1215 : Part 5 : 1991
Methods of test for finishes for wooden furniture : Part 5 : Assessment of surface resistance to cold oils and fats.
This Part of Malaysian Standard describes a method of test for assessing the resistance of a wood finishing system to marking by a cold oil or fat in contact with the finished surface.
Price RM10
MS 1215 : Part 6 : 1991
Methods of test for finishes for wooden furniture : Part 6 : Assessment of resistance to mechanical damage.
This Part of Malaysian Standard describes three independent tests which together provide a means of assessing the resistance of a wood finishing system to damage as a result of mechanical action.
MS 1246 : Part 2 : 1993
Strength and stability of furniture : Part 2 : Methods for determination of stability of chairs and stools.
This Part of Malaysian Standard describes methods for the determination of stability for all types, of upright chairs, stools, easy chairs, pouffe and tilting and reclining chairs. It does not apply to settees and other multiple unit seating, which are covered by Part 3 of this Malaysian Standard.
Price RM20
MS 1246 : Part 3 : 1993
Strength and stability of furniture : Part 3 : Methods for determination of strength of settees.
This Part of Malaysian Standard describes methods for the determination of strength of the structure of all types of settees, and other articles such as benches with seats for two to four persons. This standard does not apply to chairs which are covered by Part 1 of the Malaysian Standard. It does not apply to multiple seating units for stadium seating as the loads applied are not representative of this type of use.
Price RM30
MS 1246 : Part 4 : 1993
Strength and stability of furniture : Part 4 : Methods for determination of stability of settees.
This Part of Malaysian Standard describes methods for the determination of stability of all types of settees, and other articles such as benches with seats for two to four persons. This standard does not apply to chairs or stools which are covered by Part 2 of the standard. It does not apply to multiple seating units for stadium seating as the loads applied are not representative of this type of use.
Price RM10
MS 1246 : Part 5 : 1993
Strength and stability of furniture : Part 5 : Methods for determination of strength of tables and trolleys.
This Part of Malaysian Standard describes methods for the determination of strength of tables and trolleys. It does not cover breakfast bars intended for permanent attachment to the structure.
Price RM20
MS 1246 : Part 6 : 1993
Strength and stability of furniture : Part 6 : Methods for determination of stability of tables and trolleys.
This Part of Malaysian Standard describes methods for the determination of stability of tables and trolleys. It does not cover breakfast bars intended for permanent attachment to the structure of building. The method of test included in Part 2 of this Malaysian Standard which involves application of a vertical downward force has been supplemented by a test based on impact by a specified mass at a specific velocity.
Price RM10
MS 1276 : Part 1 : 1992
Specification for performance requirements and tests for office furniture : Part 1 : Desks and tables.
This Part of standard contains performance requirements for office desks and tables and specifies tests applicable to those items. General requirements for safety and colour, and miscellaneous requirements are also included.
Price RM20
MS 1276 : Part 2 : 1993
Specification for performance requirements and tests for office furniture : Part 2 : Adjustable for chairs.
This Part of Malaysian Standard specifies methods of test and acceptance criteria for strength, and design requirements for the stability, of office chairs which are rotatable and adjustable in height.
Price RM30
MS 1315 : 2002
Performance requirements and tests for office furniture : Storage furniture (First revision)
This Malaysian Standard covers specifications for shelves and open or close cupboards and cabinets excluding compactors and drawing office storage furniture. Samples of the furniture are shown in Appendix A. This standard supersedes MS 1315 : 1993
Price RM30
MS 1316 : 2002
Specification for steel filing cabinets (First revision)
This Malaysian Standard specifies dimensions and other requirements for two types of filling cabinets, one intended primarily for the storage of A4 size documents and the other designed to hold foolscap size papers. Either type may have two, three or four drawers. This standard supersedes MS 1316 : 1993
Price RM10
MS 1581 : Part 1 : 2003
Furniture – Storage units – Part 1 : Safety requirements and test methods
This Malaysian Standard specifies safety requirements and test methods for all types of domestic storage furniture excluding kitchen furniture and special function furniture, e.g. for use as a changing unit.
Price RM20
MS 1581 : Part 2 : 2003
Furniture – Storage units – Part 2 : Methods for determination of strength and durability
This Malaysian Standard describes methods for determination of the strength and durability of storage furniture. It does not apply to test methods for determining safety aspects for domestic storage furniture, which are given in MS 1581. It also does not apply to the structural performance of kitchen furniture, nor to office furniture, nor to educational furniture. This Malaysian Standard replaces MS 1246: Part 7:1991.
Price RM30
MS 1581 : Part 3 : 2003
Furniture – Storage units – Part 3 : Methods for determination of stability
This Malaysian Standard describes methods for determination of the stability of free standing non-domestic storage furniture. The tests do not apply to domestic storage furniture, which is covered by MS 1581, nor to the stability of kitchen furniture, nor to office furniture. This Malaysian Standard replaces MS 1246: Part 8:1991.
Price RM20
MS 1711 : Part 1 : 2003
Furniture – Office chair (adjustable): Part 1 : Dimensions – Determination of dimensions
This Malaysian Standard applies to office chair (adjustable). It specifies dimensions of three types of chairs as well as test methods for their determination.
Price RM30
MS 1711 : Part 2 : 2003
Furniture – Office chair (adjustable) – Part 2 : Safety requirements
This Malaysian Standard specifies the safety requirements for office chairs (adjustable).
Price RM10
MS 1711 : Part 3 : 2003
Furniture – Office chair (adjustable) – Part 3 : Safety test methods
This Malaysian Standard specifies the test methods to be applied when testing the safety of office work chairs (adjustable). The corresponding safety requirements are given in Part 2 of this standard.
Price RM30
MS 1839 : Part 1 : 2005
Furniture – Office tables – Part 1 : Dimensions
This Malaysian Standard specifies dimensions of office tables in general use. It includes neither dimensions for drawers nor those for other tables or reception table.
Price RM10
MS 1839 : Part 2 : 2005
Furniture – Office tables – Part 2 : Mechanical safety requirements
This Malaysian Standard specifies the mechanical safety requirements of office tables.
Price RM10
MS 1839 : Part 3 : 2005
Furniture – Office tables – Part 3 : Methods for the determination of the stability and the mechanical strength of the structure
This Malaysian Standard specifies methods of test for the determination of the stability and the mechanical strength of the structure of office tables. The tests are designed to be applied to an article of furniture that is fully assembled and ready for use.
Price RM20
MS 1861 : 2005
Spring units for mattresses – Specification
This Malaysian Standard specifies requirements for open coil and pocketed mattresses spring units used for the construction of spring interior mattresses and includes performance tests.
Price RM20
MS 1917 : 2006
Furniture – educational institutions – Specification for canteen furniture
This Malaysian Standard specifies the requirements for canteen furniture used in educational institution. This standard includes requirements for appearance, safety, testing, inspection, dimension and tolerance of canteen furniture used in an educational institution.
Price RM20
MS 2022 : 2006
Furniture – Inclusion of glass in the construction of tables or trolleys – Specification
This Malaysian Standard specifies requirements to ensure reasonable safety of tables or trolleys which incorporate an area of flat glass > 0.02 m˝.
Price RM10
97.145
Ladders
MS 1009 : 1986
Specification for portable aluminium step-ladders.
Specifies definitions, requirements and test methods for aluminium step-ladders which are designed only for one-man use with a maximum working load of 90kg.
Price RM20
MS 1764 : Part 1 : 2004
Furniture – Seating: Part 1: Requirements for the strength and durability of the structure of domestic and contract seating
This standard specifies performance requirements for the strength and durability of structure of domestic and contract seating. It does not apply to multiple seating units, seating for educational institutions and office work chairs.
Price RM20
MS 1764 : Part 2 : 2004
Furniture – Seating: Part 2: Test methods for the determination of strength and durability (domestic)
This standard specifies test methods for determining the strength and durability of the structure of all types of indoor domestic seating for adults without regard to materials, design/construction or manufacturing processes.
Price RM40
MS 1764 : Part 3 : 2004
Furniture – Seating: Part 3: Determination of stability
This standard specifies methods for the determination of the stability of all types of domestic seating that can be used by adults.
Price RM30
MS 1765 : Part 1 : 2004
Furniture – Tables: Part 1: Requirements for the strength, durability and stability of tables and trolleys for domestic and contract use
This standard specifies performance requirements for the strength, durability and stability of structure of tables and trolleys for domestic and contract use. It does not apply to kitchen furniture.
Price RM20
MS 1765 : Part 2 : 2004
Furniture – Tables: Part 2: Test methods for determination of strength, durability and stability (domestic)
This standard specifies test methods for determining the strength, durability and stability of all types of domestic tables without regard to materials, design/construction or manufacturing processes. The tests are designed to be applied to an article of furniture that is fully assembled and ready for use. It does not apply to outdoor tables and changing tables.
Price RM20
MS 1788 : 2005
Furniture – Educational institutions – Specification for student chairs, tables and stools
This Malaysian Standard specifies the requirements for student chairs, tables and stools for general education purposes used in an educational institution. This standard includes requirements for appearance, safety, testing, inspection, dimension and tolerance of student chairs, tables and stools used in an educational institution.
Price RM20
MS 1789 : 2005
Furniture – Educational institutions – Requirements for the strength and stability of student chairs, tables and stools
This Malaysian Standard specifies the requirements for student chairs, tables and stools for general education purposes used in an educational institution.
Price RM30
MS 1791 : 2005
Furniture – Office furniture – Visitor chairs.
This Malaysian Standard specifies dimensions and safety requirements for visitor chairs. The dimensional requirements are not applicable to easy chairs.
MS 1069 : 1987
Specification for portable aluminium single and extension ladders.
Specifies requirements for portable aluminium single and extension ladders, which are designed only for one man use.
Price RM20