ADJUSTMENT/SETTING
F. Spotted replacement part (Every 50,000 cycle)
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Tray section Paper feed clutch /1 56AA8201#
1 z Actual replacement
cycle: 3,000,000 Paper feed clutch /2
56AA8201#
1 z
Paper feed clutch /3 56AA8201#
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Tray section (PP-701)
bizhub PRO 1050/1050P 1050e/1050eP
23
3.3.4 FD
A. Maintenance 1 (Every 2,250,000 prints)
B. Maintenance 2 (Every 5,250,000 prints)
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Preparations Paper through check z
2 PI section Paper feed rubber 50BA-575#
2 z Actual replacement
cycle: 100,000 Separation rubber
13QN-443#
2 z
Cleaning of each sensor z Blower brush
3 Tray up/down section
Cleaning of each sensor z
4 Punch section
Cleaning of each sensor z
5 Conveyance section
Cleaning of each sensor z
6 Final check Paper through check z
Cleaning of the cover z Drum cleaner/
cleaning pad
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Preparations Paper through check z
2 PI section Pick-up rubber 50BA-574#
6 z Actual replacement
cycle: 200,000 3 Tray up/down
section
Tray up down motor 129U-108#
1 z Actual replacement
cycle: 5,000,000
4 Final check Paper through check z
Cleaning of the cover z Drum cleaner/
cleaning pad
bizhub PRO 1050/1050P /1050e/1050eP
C. Maintenance 3 (Every 10,000,000 prints)
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Preparations Paper through check z
2 Punch section
Punch motor 15AG-573#
1 z Actual replacement
cycle: 5,000,000
4 Final check Paper through check z
Cleaning of the cover z Drum cleaner/
cleaning pad
bizhub PRO 1050/1050P 1050e/1050eP
25
3.3.5 LS
A. Maintenance 1 (Every 15,000,000 prints)
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Preparations Paper through check z
2 Conveyance section
Paper press solenoid /3 15AV8255#
1 z Actual replacement
cycle: 5,000,000 Paper press solenoid /1
15AV8252#
1 z
Paper press solenoid /2 15AV8251#
1 z
Rear stopper solenoid 15AV8253#
1 z
Stacker tray up down motor
15AV8003#
1 z
Cleaning of each sensor z Blower brush
3 Final check Paper through check z
Cleaning of the cover z Drum cleaner/
cleaning pad
bizhub PRO 1050/1050P /1050e/1050eP
3.3.6 FS
A. Maintenance 1 (Every 750,000 prints)
B. Maintenance 2 (Every 3,000,000 prints)
C. Maintenance 3 (Every 5,250,000 prints)
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Preparations Paper through check z
2 Main tray section
Paper exit roller /A 122H4825#
8 z
3 Stacker section
Cleaning of each sensor z Blower brush
4 Conveyance section
Cleaning of the paper dust removing brush
z Vacuum cleaner/
blower brush 5 Stapler
section
Cleaning of staple scraps box
z
6 Final check Paper through check z
Cleaning of the cover z Drum cleaner/
cleaning pad
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Stapler section
Stapler unit /Fr 15AA4222#
1 z Actual replacement
cycle: 500,000 Stapler unit /Rr
15AA-450#
1 z
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Stacker
2
27
bizhub PRO 1050/1050P 1050e/1050eP 3.3.7 SD
A. Maintenance 1 (Every 750,000 prints)
B. Maintenance 2 (Every 1,500,000 prints)
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Right angle conveyance section
Right angle conveyance sensor /1
z Blower brush
2 Right angle conveyance
sensor /2
z
3 Right angle conveyance
roller /1
z Drum cleaner/
cleaning pad
4 Right angle conveyance
roller /2
z
5 Right angle conveyance
roller /3
z
6 Right angle conveyance
roller /4
z
7 Folding section
Folding main scan align-ment home sensor /Fr1
z Blower brush
8 Folding main scan
align-ment home sensor /Fr2
z
9 Folding entrance roller /1 z Drum cleaner/
cleaning pad
10 Folding entrance roller /2 z
11 Folding entrance roller /3 z
12 Saddle stitching section
Saddle stitching paper sensor
z Blower brush
13 Bundle sensor /1 z
14 Bundle pro-cessing sec-tion
Bundle sensor /2 z
15 Trimmer section
Trimmer scraps full sensor z
16 Trimmer board assembly
15AN5282#
z Actual replacement cycle: 18,900 cuts
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Trimmer section
Trimmer blade assembly 15AN-570#
1 z Actual replacement
cycle: 37,500 cuts
bizhub PRO 1050/1050P /1050e/1050eP
C. Maintenance 3 (Every 8,000,000 prints)
D. Maintenance 4 (Every 20,000,000 prints)
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Trimmer section
Trimmer blade motor 15AN8002#
1 z Actual replacement
cycle: 200,000 cuts
2 Trimmer press motor
15AN8002#
1 z
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Right angle conveyance section
Roller release solenoid /1 15AN8251#
1 z Actual replacement
cycle: 5,000,000 2 Roller release solenoid /2
15AN-239#
1 z Actual replacement
cycle: 5,000,000 3 Right angle gate solenoid
15AN-249#
1 z Actual replacement
cycle: 5,000,000 4 Saddle
stitching section
Stapler assembly /Rt 15AN-550#
1 z Actual replacement
cycle: 1,000,000
5 Stapler assembly /Lt
15AN-550#
1 z Actual replacement
cycle: 1,000,000 6 Folding
section
Roller release solenoid /3 15AN8251#
1 z Actual replacement
cycle: 5,000,000 7 Bundle
pro-cessing sec-tion
Bundle press stage gear
15AN7719#
1 z Actual replacement
cycle: 500,000 books (Bundle exit tray exit)
2
29
bizhub PRO 1050/1050P 1050e/1050eP 3.3.8 PB
A. Maintenance 1 (Every 750,000 prints)
No. Unit
classification
Description Quantity Implementation classification Materials Tools used Cleaning Check Lubrication Replacement
1 Conveyance section
Entrance sensor z Blower brush
2 SC entrance sensor z
3 Sub tray conveyance roller z Drum cleaner/
cleaning pad
4 Intermediate conveyance roller z
5 Entrance conveyance roller z
6 Cover paper conveyance roller z
7 Glue tank section
Glue tank z z*2 Tweezers, industrial
wiper, multemp FF-RM
Cover paper folding plate
z*1 Tweezers, industrial wiper
10 Book spine backing
plate
z*1
11 Book exit belt /Rr z Drum cleaner/
cleaning pad
15 Cover paper table
entrance roller
z
16 Paper dust removing
brush
z Blower brush
17 Cover paper alignment
plate shafts
z*3 Plas guard No.2
18 Glue supply Pellet hopper z Blower brush
19 Book stock section
Book load limit sensor z
20 Book upper limit LED z
21 Book conveyance belt /Rr z Drum cleaner/
cleaning pad
22 Book conveyance belt /Fr z
23 Book movement belt z
24 Cover paper tray section
Paper dust removing brush
z Blower brush
25 Paper dust removing
roller
z
26 Conveyance roller z Drum cleaner/
cleaning pad
bizhub PRO 1050/1050P /1050e/1050eP
*1 Cleaning of the cover paper folding plate and the book spine backing plate is an abbreviated cleaning.
Remove adhered glue as necessary.
*2 Lubricate the glue apply roller motor drive connecting gear.
*3 Lubricate the cover paper alignment plate shafts.
B. Maintenance 2 (Every 6,000,000 prints)
C. Maintenance 3 (Every 10,000,000 prints)
D. Maintenance 4 (Every 20,000,000 prints)
E. Spotted replacement part (Every 500,000 cycle)